• Title/Summary/Keyword: Warehouses

Search Result 266, Processing Time 0.02 seconds

Evaluation of Mechanical Joint Structural Performance through Actual Performance Testing of PC Connections (PC 접합부의 실물 성능실험을 통한 기계식이음 구조성능 평가)

  • Kim, Jae Young;Kim, Yong Nam;Seo, Min Jung;Kim, Beom Jin;Kim, Sung Jig;Lee, Kihak
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.28 no.3
    • /
    • pp.129-139
    • /
    • 2024
  • In this study, the SBC system, a new mechanical joint method, was developed to improve the constructability of precast concrete (PC) beam-column connections. The reliability of the finite element analysis model was verified through the comparison of experimental results and FEM analysis results. Recently, the intermediate moment frame, a seismic force resistance system, has served as a ramen structure that resists seismic force through beams and columns and has few load-bearing walls, so it is increasingly being applied to PC warehouses and PC factories with high loads and long spans. However, looking at the existing PC beam-column anchorage details, the wire, strand, and lower main bar are overlapped with the anchorage rebar at the end, so they do not satisfy the joint and anchorage requirements for reinforcing bars (KDS 41 17 00 9.3). Therefore, a mechanical joint method (SBC) was developed to meet the relevant standards and improve constructability. Tensile and bending experiments were conducted to examine structural performance, and a finite element analysis model was created. The load-displacement curve and failure pattern confirmed that both the experimental and analysis results were similar, and it was verified that a reliable finite element analysis model was built. In addition, bending tests showed that the larger the thickness of the bolt joint surface of the SBC, the better its structural performance. It was also determined that the system could improve energy dissipation ability and ductility through buckling and yielding occurring in the SBC.

A Study on the Fire Diffusion Model of Loadable Materials in Rack-Type Warehouse Using FDS (물류시설 적재가연물 FDS 를 통한 화재 확산 모델링에 관한 연구)

  • Yu Bin Joo;Eun Su Son;Sang Il Kim;Doo Chan Choi
    • Journal of the Society of Disaster Information
    • /
    • v.20 no.3
    • /
    • pp.672-681
    • /
    • 2024
  • Purpose: In order to secure a specific fire diffusion model, this study compares and analyzes the NIST UL standard application scenario and the performance-oriented design application scenario and examines the difference between the fire diffusion model and the surface fire model. Method: Temperature, visibility, and CO sensors were installed for each scenario using FDS, and the two scenarios were compared and analyzed through the changes. Result: As a result of analyzing the temperature, visibility, and CO for each scenario, the NIST UL standard application scenario is very similar to the actual fire, and the performance-oriented design application scenario shows a harsh fire situation. Conclusion: When designing fire safety for large buildings such as distribution warehouses, it is important to prepare comprehensive fire safety measures in consideration of both actual fire and harsh fire conditions.

A Study on Security Vulnerability and Enhancement for IP Camera (IP 카메라의 보안 취약점과 보안성 강화에 관한 연구)

  • Ryang Rae Kim;Seoung Hyeon Jo;Jiyoon Kim
    • Convergence Security Journal
    • /
    • v.24 no.3
    • /
    • pp.143-151
    • /
    • 2024
  • IP cameras allow users to view live video regardless of their location. Due to this advantage, they are used in homes to monitor infants, pets, and the elderly, and they are widely utilized in companies for physical security control and monitoring of secure areas, such as data centers and warehouses. However, IP cameras that lack appropriate security measures can be eavesdropped on by malicious attackers. This study demonstrates that hacking attacks can be executed by exploiting various security vulnerabilities in IP cameras, including brute force attacks. Accordingly, we propose an architecture that addresses these vulnerabilities, suggesting measures to enhance the security of IP cameras. Also, we shows that the proposed method can safely and effectively provide video information encryption and user authentication for IP cameras through security verification and availability evaluation.

A Study on Placeness and Memory of Modern Space With Focus on , , (근대공간의 장소성과 기억에 관한 연구 <서울역>, <온양민속 박물관>, <옥포조선소>를 중심으로)

  • Bae, Yoonho
    • The Journal of the Convergence on Culture Technology
    • /
    • v.1 no.2
    • /
    • pp.1-19
    • /
    • 2015
  • The history of modernization of Korea is divided into two folds of the colonial era in the 20's and the economic development era in the 60's. Most of the spaces built in the process of modernization were public spaces developed by the drive of the government. These spaces of modernization are functionality-oriented public places of production and at the same time, and they are the spaces of national power to symbolize the identity of national authorities. Along with changes in the society, modern spaces were reduced down to monument buildings without functionality and this requires new definition to renew the identity of modern spaces. Small stations, power plants, mines, warehouses, abandoned factories, and etc... the study has paid attention to the process of changing thought, one of the main characteristics of modernization, the relations of modern concepts projected in the spaces, framework of modern society, and placeness in the process of framework building and relations of people in the spaces with video records on the process of rebuilding new identity of modern spaces and memories of the spaces. The relations of modern spaces and memory were explored in < Seoul Station > while the relations between modern spaces and records and place identity were explored in < Onyang Folk Museum > and < Okpo Shipyard > respectively. In the relations between space identity and memory in each space, the ironic relations of power in modern spaces (placeness) and personal narrative (memories) were explored with oral narrative and video footage.

Non Duplicated Extract Method of Heterogeneous Data Sources for Efficient Spatial Data Load in Spatial Data Warehouse (공간 데이터웨어하우스에서 효율적인 공간 데이터 적재를 위한 이기종 데이터 소스의 비중복 추출기법)

  • Lee, Dong-Wook;Baek, Sung-Ha;Kim, Gyoung-Bae;Bae, Hae-Young
    • Journal of Korea Spatial Information System Society
    • /
    • v.11 no.2
    • /
    • pp.143-150
    • /
    • 2009
  • Spatial data warehouses are a system managing manufactured data through ETL step with extracted spatial data from spatial DBMS or various data sources. In load period, duplicated spatial data in the same subject are not useful in extracted spatial data dislike aspatial data and waste the storage space by the feature of spatial data. Also, in case of extracting source data on heterogeneous system, as those have different spatial type and schema, the spatial extract method is required for them. Processing a step matching address about extracted spatial data using a standard Geocoding DB, the exiting methods load formal data set. However, the methods cause the comparison operation of extracted data with Geocoding DB, and according to integrate spatial data by subject it has problems which do not consider duplicated data among heterogeneous spatial DBMS. This paper proposes efficient extracting method to integrate update query extracted from heterogeneous source systems in data warehouse constructer. The method eliminates unnecessary extracting operation cost to choose related update queries like insertion or deletion on queries generated from loading to current point. Also, we eliminate and integrate extracted spatial data using update query in source spatial DBMS. The proposed method can reduce wasting storage space caused by duplicate storage and support rapidly analyzing spatial data by loading integrated data per loading point.

  • PDF

A Study on the Combustion Characteristics of Synthetic Insulation for Building (건축용 합성 단열재의 연소특성에 관한 연구)

  • Kwon, Hyun-Seok;Lee, Si-Young;Kim, Jong-Buk;Yoon, Myoung-Oh
    • Fire Science and Engineering
    • /
    • v.32 no.2
    • /
    • pp.30-37
    • /
    • 2018
  • This study is an analysis of combustion characteristics of synthetic insulation materials such as houses and warehouses. Using combustion cone calorimeter and SEM, the researching has experimented combustion characteristics of four kinds of materials such as flame retardant styrofoam, general styrofoam, urethane and gypsum board. And analyzed. As a result of the test, the ignition time (TTI) for the thermal insulation material was found at 27 s~43 s, and the flame retardant styrofoam was ignited at the lowest TTI at 27 s and disappears at 28 s. In addition, the maximum heat release rate (peak HRR) and average heat release rate (mean HRR) of each material were expressed in the following order: urethane> flame retardant styrofoam> styrofoam> gypsum board. Also, the total smoke release ($m^2/m^2$) was the largest at $30.798m^2/m^2$ in flame-retardant styrofoam. The general CO concentration of styrofoam was 0.275 kg/kg and the emission concentration was 12.807 kg/kg. The residues showed the highest 0.029 g in the gypsum board among the above materials.

GCP Data Acquisition using Image Chip (영상 CHIP을 이용한 지상기준점 정보취득)

  • 손홍규;이재원;허민;김기홍;이준명
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2003.04a
    • /
    • pp.349-353
    • /
    • 2003
  • 최근 관심이 증대되고 있는 국토모니터링과 관련하여 기존의 SPOT, IRS, KOMPSAT, LANDSAT 등의 중ㆍ저해상도 위성영상과 IKONOS 등의 고해상도 위성영상을 이용하여 국토의 변화를 탐지하고자 하는 시도가 활발히 진행되고 있다. 이 때 영상의 기하보정은 필수적인 과정이며 영상의 기하보정시 기준점을 취득하는 과정에 많은 시간과 작업비용이 소요된다. 현재 기준점 취득은 수치지도 등을 통해 기존의 지상기준점을 이용하는 방법과 GPS를 이용한 현지 측량방법이 활용되고 있는데 동일지역에 대해 매번 사업 때마다 수행되고 있는 실정이다. 따라서 이러한 과정을 보다 효율적으로 수행하기 위한 하나의 방안으로 본 연구에서는 image chip을 이용하여 GCP를 취득하고 이를 데이터베이스로 구축하여 기존의 작업을 자동화, 체계화하고자 하였다. 이를 통하여 중복측량 방지와 데이터의 균질성을 기할 수 있었다. Image Chip의 영상 정합을 위해서는 상관계수법과 최소제곱정합법을 이용하여 부영상소 단위까지 정합결과를 얻을 수 있었으며 위성의 header 정보로부터의 영상의 표정각과 입사각에 대한 정보를 이용하여 축척과 회전요소를 고려함으로써 영상 정합시 보다 정확한 기준점 정보를 취득할 수 있었다. 또한, 이종 센서간 영상정합 가능성에 대해서 연구한 결과 KOMPSAT과 SPOT간에는 신뢰할 만한 수준의 정합 결과를 얻을 수 있었으나 고해상도 영상의 경우에는 항공사진과 IKONOS의 영상 정합시 센서의 방사학적 특성의 차이로 신뢰할 안한 결과를 얻을 수 없었다. 영상 정합시 정확도에 영향을 미치는 인자들에 관한 실험 결과 센서의 파장, 계절, Chip 영상의 크기 등이 큰 영향을 미쳤으며 영상정합을 위해 영상 GCP를 데이터베이스에서 검색할 때 이에 대한 고려가 우선적으로 이루어져야 할 것으로 사료된다.n of hub-and-spoke system, integration of logistics bases, introduction of (automatic) parking building, diversification of transportation mode, and etc. At the same time, we constructed three practically executable scenarios based on those ideas. The first is "Center Hub" scenario, the second is "Metropolitan Hub" scenario. The third and last scenario is "Regional Consolidation of Warehouses (distribution centers)".f worldly desire' and 'cordiality' that one could be deserved his diligency becoming a part of the harmonious idealistic living place. Fourthly, on the character of story teller. Originally he is a incomer of "Gang-Ho" from real world. so that reason, he is showing dualism not to deny the loyalty oath to his king, while he intends to satisfy with the life in "Gang- Ho" separating himself from real world. As a gentry, at that time, the loyalty oath is inevitable one and that is found from wr

  • PDF

Investigation of Packaging of Fresh Jujube (Zizyphus jujuba) on Quality during Storage (농가에서 활용가능한 생대추의 저장조건 연구)

  • Chung, Hyun-Jung
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.42 no.8
    • /
    • pp.1296-1302
    • /
    • 2013
  • The quality of fresh jujube (Zizyphus jujuba) fruit rapidly declines in the postharvest stage and thus the effective storage conditions for agricultural warehouses were investigated in this study. Fresh jujubes (~10 kg) were stored using five different storage methods: plastic box without further packaging as a control (C-PL), plastic box with hanji packaging (H-PL), plastic box with functional film packaging (F-PL), cardboard box with hanji packaging (H-CB), and cardboard box with functional film packaging (F-CB). The storage boxes were stored in a refrigerator ($0^{\circ}C$ and 80~90% RH), equipped with an ethylene gas scavenging device for 9 weeks and then the quality characteristics were analyzed. The control storage conditions of jujubes showed a substantial decline in quality with decreases in moisture content, hardness, and sugar content as well as increases in decay ratio and redness. Among the tested storage conditions, F-CB was most effective in terms of maintaining the quality of jujube fruit while maintaining firmness, weightlessness, ripening degree from redness and visible appearance. In conclusion, effective storage and packaging conditions during storage enabled maintenance of fruit quality of jujubes for 9 weeks.

Pre-aggregation Index Method Based on the Spatial Hierarchy in the Spatial Data Warehouse (공간 데이터 웨어하우스에서 공간 데이터의 개념계층기반 사전집계 색인 기법)

  • Jeon, Byung-Yun;Lee, Dong-Wook;You, Byeong-Seob;Kim, Gyoung-Bae;Bae, Hae-Young
    • Journal of Korea Multimedia Society
    • /
    • v.9 no.11
    • /
    • pp.1421-1434
    • /
    • 2006
  • Spatial data warehouses provide analytical information for decision supports using SOLAP (Spatial On-Line Analytical Processing) operations. Many researches have been studied to reduce analysis cost of SOLAP operations using pre-aggregation methods. These methods use the index composed of fixed size nodes for supporting the concept hierarchy. Therefore, these methods have many unused entries in sparse data area. Also, it is impossible to support the concept hierarchy in dense data area. In this paper, we propose a dynamic pre-aggregation index method based on the spatial hierarchy. The proposed method uses the level of the index for supporting the concept hierarchy. In sparse data area, if sibling nodes have a few used entries, those entries are integrated in a node and the parent entries share the node. In dense data area, if a node has many objects, the node is connected with linked list of several nodes and data is stored in linked nodes. Therefore, the proposed method saves the space of unused entries by integrating nodes. Moreover it can support the concept hierarchy because a node is not divided by linked nodes. Experimental result shows that the proposed method saves both space and aggregation search cost with the similar building cost of other methods.

  • PDF

Shoes from Pinet to the Present

  • June, Swann
    • Proceedings of the Korea Society of Costume Conference
    • /
    • 2001.08a
    • /
    • pp.11-13
    • /
    • 2001
  • For those unfamiliar with the shoe world, Pinet (1817-1897) was a contemporary of Worth, the great Parisian couturier. So I look at the glamour shoes and the world of haute couture, and indeed the development of the named designer. That is a concept we are all familiar with now. So it is not easy to comprehend the lack of names for the exquisite work before 1850. Straightway I have to say that the number of noted shoe designers is far fewer than famous dress designers, but I will introduce you to some of them, against the background of contemporary shoe fashions. Franc;ois Pinet was born in the provinces (probably Touraine) in 1817, two years after the end of the Napoleonic Wars. His father, an ex-soldier, settled to shoemaking, a comparatively clean and quiet trade. It had a tradition of literacy, interest in politics, and was known as the gentle craft, which attracted intelligent people. We should presume father would be helped by the family. It was usual for a child to begin by the age of 5-6, tying knots, sweeping up, running errands and gradually learning the job. His mother died 1827, and father 1830 when he was 13, and at the time when exports of French shoes were flooding world markets. He went to live with a master shoemaker, was not well treated, and three years later set out on the tour-de- France. He worked with masters in Tours and Nantes, where he was received as Compagnon Cordonnier Bottier du Devoir as Tourangeau-Ia rose dAmour (a name to prove most appropriate). He went on to Bordeaux, where at 19 he became president of the local branch. In 1841 he went to Paris, and in 1848, revolution year, as delegate for his corporation, he managed to persuade them not to go on strike. By now the shoemakers either ran or worked for huge warehouses, and boots had replaced shoes as the main fashion. In 1855 Pinet at the age of 38 set up his own factory, as the first machines (for sewing just the uppers) were appearing. In 1863 he moved to new ateliers and shop at Rue ParadisPoissoniere 44, employing 120 people on the premises and 700 outworkers. The English Womans Domestic Magazine in 1867 records changes in the boots: the soles are now wider, so that it is no longer necessary to walk on the uppers. There is interest in eastern Europe, the Polonaise boots with rosette of cord and tassels and Bottines Hongroises withtwo rows of buttons, much ornamented. It comments on short dresses, and recommends that the chaussure should correspond to the rest of the toilet. This could already be seen in Pinets boots: tassels and superb flower embroidery on the higher bootleg, which he showed in the Paris Exposition that year. I think his more slender and elegant Pinet heel was also patented then or 1868. I found little evidence for colour-matching: an English fashion plate of 1860 shows emerald green boots with a violetcoloured dress.

  • PDF