• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.211-219
• /
• 1996

In a small high-speed D. I. diesel engine, the injected fuel spray into the atmosphere of the high temperature is burnt by go through the process of break up, atomization, evaporation and process of ignition. These process are important to decide the emission control and the rate of fuel consumption and out put of power. Especially, in the case of injected fuel spray impinging on the wall of piston cavity, the geometry of piston cavity gives great influence the ignitability of injected fuel and the flame structure. Ordinary, the combustion chamber of driving engine have unsteady turbulent flow be attendant on such as the change of temperature, velocity and pressure. So the analysis of spray behavior is difficult. In this study, the spray was impinged on the wall of 3 types of piston cavity such as Dish, Toroidal, Re-entrant type, in order to analyze the combustion process of impinging spray precisely and systematically. And hot wire probe was used for analyze non-steady flow characteristics of impinging spray, and to investigate the behavior of spray, the aspects of concentration c(t), standard deviation σ(t) and variation factor(vf) was measured with the lapse of time.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1571-1578
• /
• 2003

This paper proposes a robust method for the Ramberg-Osgood(R-O)fit to accurately estimate elastic-plastic J from engineering fracture mechanics analysis based on deformation plasticity. The proposal is based on engineering stress-strain data to determine the R-O parameters, instead of true stress-strain data. Moreover, for practical applications, the method is given not only for the case when full stress-strain data are available but also for the case when only yield and tensile strengths are available. Reliability of the proposed method for the R-O fit is validated against detailed 3-D Finite Element (FE) analyses for circumferential through-wall cracked pipes under global bending using five different materials, three stainless steels and two ferritic steels. Taking the FE J results based on incremental plasticity using actual stress-strain data as reference, the FE J results based on deformation plasticity using various R-O fits are compared with reference J values. Comparisons show that the proposed R-O fit provides more accurate J values for all cases, compared to existing methods for the R-O fit. Advantages of the proposed R-O fit in practical applications are discussed, together with its accuracy.

• 한국건축시공학회지
• /
• 제18권1호
• /
• pp.17-24
• /
• 2018

비파괴 시험 중 선 매입 인발시험법은 아마도 현장의 콘크리트 압축강도를 평가하기 위해 널리 사용되는 기술이라고 할 수 있다. 인발시험은 콘크리트 타설 전에 특별히 계획된 형태의 철재 봉을 설치하여 콘크리트가 굳은 다음 그 봉을 인발하여 그때의 하중을 측정하여 콘크리트 강도를 평가하는 방법으로 미국과 캐나다에서는 콘크리트 구조물 공사중에 콘크리트 강도를 결정하는 신뢰할 만한 시험법으로 각각 ASTM C 900과 CSA A23.2에 규격화 되어 있다. 직경 12mm볼트에 홈이 파인 파단형 인발 볼트와 인발너트, 그리고 로드셀이 필요 없는 오일유압펌프로 구성된 간이인발시험법을 초고강도 콘크리트 강도를 추정하기 위하여 제안되었다. 인발시험과 간이인발시험의 이점을 검증하기 위하여, 80MPa 및 100MPa 급 두 가지 유형의 콘크리트로 제작된 4개의 시험벽체와 2개의 슬래브를 대상으로 로드셀을 장착한 간이인발시험을 사용하여 인발시험을 실시하였다. 인발하중과 콘크리트 압축강도, 파단형 인발볼트의 파단 여부를 재령 7일까지는 매일, 그리고 14일, 21일, 28일, 90일에 측정하였다. 인발하중과 콘크리트 압축강도의 상관곡선은 매우 높은 신뢰도를 보여주었으며, 따라서 인발시험이 현장에서 구조물의 초고강도 콘크리트 강도를 평가할 수 있다는 것을 확인할 수 있었다. 파단형 인발볼트 직경과 콘크리트 강도와의 관계식으로 y=0.0184+5.4(x=콘크리트 압축강도(MPa), y=파단형 인발볼트 직경(mm))를 제안하였다. 본 연구에서 얻은 결과로 간이인발시험은 유용하며 저비용, 간편성 및 편의성에 대한 가능성이 검증되었다.

• 설비공학논문집
• /
• 제26권7호
• /
• pp.315-321
• /
• 2014

In this study, external condensation heat transfer coefficients (HTCs) of two non-azeotropic refrigerant mixtures of HFC32/HFC152a at various compositions were measured on both 26 fpi low-fin and Turbo-C enhanced tubes, of 19.0 mm outside diameter. All data were taken at the vapor temperature of $39^{\circ}C$, with a wall subcooling of 3~8 K. Test results showed that the HTCs of the tested mixtures on the enhanced tubes were much lower than the ideal values calculated by mass fraction weighting of the pure component HTCs. Also, the reduction of HTCs due to the diffusion vapor film was much larger than that of a plain tube. Unlike HTCs of pure fluids, HTCs of the mixtures measured on enhanced tubes increased, as the wall subcooling increased, which was due to the sudden break-up of the vapor diffusion film with an increase in wall subcooling. Finally, the heat transfer enhancement ratios for mixtures were found to be much lower, than those of pure fluids.

• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.647-654
• /
• 2012

외부 환경조건에 의한 항공기 위협인자로서 과냉각 대형 액적은 그 중요성이 지속적으로 보고되고 있다. 이러한 대형 액적의 거동은 상대적으로 작은 액적과 달리 그 형태가 변화하며 액적이 표면과 충돌시 파편이 발생하는 등 다양한 물리적 특성을 나타낸다. 이러한 대형 액적의 거동을 시뮬레이션 하기 위해 비정렬 격자계 기반 2차원 압축성 Navier-Stokes 코드와 액적 거동 시뮬레이션 코드를 개발하였다. 또한 대형 액적의 물리적 현상을 모사하기 위해 반경험적 기법에 기반한 액적항력모델과 액적-고체표면 충돌 모델을 기존 액적장 지배방정식의 액적항력계수 및 경계면의 수치적 경계조건으로 적용하였다. 그 결과 풍동 시험과 액적충돌 영역 및 최대 축적율은 매우 유사하게 나타난 반면 NACA23012 익형의 아랫면 주위 축적율의 경향은 풍동 시험보다 다소 크게 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.200-203
• /
• 2003

A study on the arc resistance and light reflectance of PTFE (polytetrafluoroethylene) nozzle for circuit breaker is presented. PTFE has been used widely as a material for circuit breaker nozzle. PTFE has excellent electrical resistivity, high melt viscosity, chemical inertness, heat resistance and low loss factor. PTFE melts at $327\;^{\circ}C$ but the viscosity is very high above the melting point. In the arcing environment in a circuit breaker, the fraction of the power is emitted out of the arc and reaches the nozzle wall by radiation, causing ablation at the surface and in the depth of the wall. Some fraction of the radiation power emitted out of the arc directly break up the chemical bonds at the surface while some fraction of the radiation power penetrates into the wall, heats up the material to evaporation temperature and causes damages deeper inside the volume of the nozzle. In this paper, some fillers that have endurance in the high temperature arc environment were added into PTFE. Adding some fillers into PTFE was expected to be efficient in improving the endurability against radiation. The light reflectance and arc resistance of PTFE composites were investigated.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.218-222
• /
• 2009

A level-set (LS) method is presented for computation of boiling phenomena which involve liquid-vapor interfaces that evolve, merge and break up in time, the flow and temperature fields influenced by the interfacial motion, and the microlayer that forms between the solid and the vapor phase near the wall. The LS formulation for tracking the phase interfaces is modified to include the effects of phase change on the liquid-vapor interface and contact angle on the liquid-vapor-solid interline. The LS method can calculate an interface curvature accurately by using a smooth distance function. Also, it is straightforward to implement for two-phase flows in complex geometries. The numerical method is applied for analysis of nucleate boiling on a horizontal surface and film boiling on a horizontal cylinder.

• Journal of Trauma and Injury
• /
• 제27권1호
• /
• pp.9-12
• /
• 2014

Violent or severe persistent coughing is rarely associated with rib fracture. We report a rare case of a cough-induced rib fracture in a patient without any traumatic history or any other underlying disease. A 32-year-old female presented to the emergency department complaining of having had right-sided pleuritic chest pain for 5 days. She had a background of an 8-week coughing illness. A posteroanterior view of the chest radiograph showed no definite fractured line. Chest computed tomography revealed a subtle break cortical line of the 7th rib in the right-sided chest wall. Early identification of a cough-induced fracture of the rib by using computed tomography may avoid unnecessary further work-ups including laboratory examination and may lead to appropriate discharge instructions including rest and reassurance. The clinical presentations and radiologic findings of rib fractures caused by coughing are presented along with a review of the literature.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.849-855
• /
• 2000

This study evaluated the effect of restraint of pressure induced bending(PIB) on crack mouth opening displacement(CMOD) for circumferential through-wall crack in pipe by using both elastic and elastic-plastic finite element analyses. The analyses results showed the restraint of PIB was decreased crack opening for a given crack length and tensile stress, and the effect was considerable for large crack and short restraint length. Also, the restraint effect on CMOD was independent on the variation in pipe diameter and decreased with increasing pipe thickness, and it depended on not total restraint length but short restraint length for non-symmetrically restrained. Additionally, the effect of restraint of PIB was more significant in the elastic-plastic analysis results compared with in the elastic analysis results.

• 오토저널
• /
• 제1권1호
• /
• pp.28-41
• /
• 1979

Propane-Air premixed combustible gas was ignited by the conventional current break system inside the open combustion chamber under the atmospheric pressure and the room temperature to measure the flame propagating speed and the burning speed, also to elucidate the history of the propagating flame behavior and wall effects to flame shape by using Ion Gap Method and High Speed Schlieren Photography. The results obtained show that the maximum flame propagating speed and maximum burning speed are approximately 292 cm/sec and 36 cm/sec at the mixture ratio 4.6%, respectively. The cellular flame structures can be observable in the rich mixture region, moreover, the cellular structures become finer, with increasing the mixture strength.