• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1987-1992
• /
• 2004

Hemodynamics behavior of the blood flow is influenced by the presence of the arterial stenosis. If stenosis is present in an artery, normal blood flow is disturbed. In the present study, characteristics of steady and pulsatile flow of non-Newtonian fluid, the effects of stenosised geometry are analyzed by numerical simulation. One interesting point is that non-symmetric solutions were obtained at severity stenosis, although the stenosis and the boundary condition were all axisymmetric.

• Water Engineering Research
• /
• 제2권3호
• /
• pp.179-185
• /
• 2001

The time consuming and expensive nature of experimental research on scouring processes caused by flowing water makes it attractive to develop numerical tools for the predication of the interaction of the fluid flow and the movable bed. In this paper the numerical simulation of scour by a wall jet is presented. The flow is assumed to be two-dimensional, and the alluvium is cohesionless. The solution process, repeated at each time step, involves simulation of a turbulent wall jet flow, solution of the convection-diffusion of sand concentration, and prediction of the bed deformation. For simulation of the jet flow, the governing equations for momentum, mass balance and turbulent parameters are solved by the finite volume method. The SIMPLE scheme with momentum interpolation is used for pressure correction. The convection-diffusion equation is solved for sediment concentration. A boundary condition for concentration at the bed, which takes into account the effect of bed-load, is implemented. The time rate of deposition and scour at the bed is obtained by solving the continuity equation for sediment. The shape and position of the scour hole and deposition of the bed material downstream of the hole appear realistic.

• 산업기술연구
• /
• 제18권
• /
• pp.405-415
• /
• 1998

This thesis is an experimental and numerical research on bearing capacity acting retaining walls close to rigid slopes with stiff angles. Experiments were performed with changing the roughness of adjacent slope to the wall, its inclination, distance between wall and slope. Vertical stress and applied surcharge loads were measured by miniature earth cells and a load cel respectively. Stress distribution Vertical Settlement of surcharge load of rigid model footing were measured by LVDTs. Bearing capacities of surcharge loads were compared with theoretical estimations by using several different methods of limit equilibrium and numerical analysis. For limit equilibrium methods, the modified silo and the wedge theories, proposed by Chung sung gyo and Chung in gyo (1994) were used to analyze test results Based on those modified theories, the particular solution with the boundary condition of surcharge loads on the surface of backfill was obtained to find the stress distributions acting in the backfill and to compare with test results. From results of surcharge test with model wall being very close to the slope, analyzed results by the modified silo theory and to be in the better agreements than other methods.

• 한국소음진동공학회논문집
• /
• 제19권2호
• /
• pp.162-168
• /
• 2009

In this study, numerical analysis is performed to investigate the sound radiation characteristics of an apartment house according to the type of the slab system. In order to satisfy the boundary condition of the apartment house, the whole floor is modelled with FEM model for three different structural system: wall, RC, flat slab system. From the analytical results, it is shown that heavy weight floor impact noise of wall type slab is larger than that of the other slab systems and the noise radiated from the wall have great effect on the sound pressure level. The results also show that the vibration energy of RC or flat slab system is widely distributed over the whole slab, which is main reason that the noise induced by the slab systems is reduced in comparison with wall slab system.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.687-694
• /
• 2014

이 연구에서는 철근콘크리트 전단벽의 경계요소의 연성설계를 위한 변위연성비모델을 제시하였다. 부재의 길이에 따른 곡률과 자유단에서의 변위를 산정하기 위한 전단벽의 단면의 변형률 및 내부힘들의 분포는 베르누이(Bernoulli)의 정리, 변형률 적합조건 및 힘의 평형조건을 이용하여 이상화하였다. 경계요소내의 횡보강근에 의한 구속효과는 Razvi and Saatcioglu에 의해 제시된 콘크리트의 응력-변형률 관계를 이용하여 고려하였다. 항복시 및 최대내력 이후 최대모멘트 80%에서의 곡률은 등가소성 힌지길이 개념을 도입하여 변위값으로 환산하였다. 일반화된 변위연성비의 모델은 다양한 범위에서 수행된 변수연구로부터 얻어진 데이터들의 회귀분석을 통하여 단순식으로 정립되었다. 제시된 단순모델은 실험결과 대비 평균, 표준편차 및 변동계수가 각각 1.05, 0.19 및 0.18로 대부분의 실험결과의 경향을 잘 예측하였다. 따라서 제시된 모델은 경계요소에서 소요연성비에 따른 횡보강근의 상세를 결정하는데 쉽게 이용될 수 있을 것으로 기대된다.

• Tribology and Lubricants
• /
• 제6권1호
• /
• pp.36-51
• /
• 1990

A parametric study of the thermal effects of a half-circumferential grooved journal bearings under aligned and misaligned conditions has been carried out by solving numerically the coupled Reynolds and energy equation system. Five different sets of boundary conditions for the energy equation have been used which include mixing between recirculating oil and inlet oil and a contraction ratio for the cavitation region. The effects of changes of the inlet oil temperature and pressure, the wall temperature and the L/D ratio have also been examined. For the range of parameters found in internal combustion engines, the mixing effectiveness at the groove and the resulting final mixture temperature have been found to be as important as the wall temperature and the heat transfer rate. The variability of the temperature, though, has been shown to smooth out the peaks of both pressure and friction during misaligned condition Distributions of friction and pressure in the oil are also examined which may be useful in attempts to reduce friction without reducing load. Results for an axial grooved bearing are also presentsed for comparision purpose.

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1138-1145
• /
• 2003

In this paper, a study on the dynamic behavior and lubrication characteristics of a reciprocating compression mechanism used in small refrigeration compressor is performed. In the problem formulation of the compressor dynamics, the viscous frictional force between piston and cylinder wall is considered in order to determine the coupled dynamic behaviors of piston and crankshaft. The solutions of the equations of motion of the reciprocating mechanism along with the time dependent Reynolds equations for the lubricating film between piston and cylinder wall and oil films of the journal bearings are obtained simultaneously. The hydrodynamic forces of journal bearings are calculated using finite bearing model and Gumbel boundary condition. And, a Newton-Raphson procedure was employed in solving the nonlinear equations of piston and crankshaft. The results explored the effects of design parameters on the stability and lubrication characteristics of the compression mechanism.

• 항공우주기술
• /
• 제7권2호
• /
• pp.27-30
• /
• 2008

풍동시험의 벽면효과 보정방법이 풍동시험 조건에서 수행된 전산해석결과에 적용되었다. 보정을 마친 양력계수는 벽면이 없는 조건에서 수행된 전산해석 결과와 잘 일치하지만 보정된 항력계수는 벽면효과가 제거된 결과와 약간의 차이를 보인다.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.24-31
• /
• 2011

Performance of the asymmetric trapezoidal fin with various upper lateral surface slopes is investigated by using the two-dimensional analytic method. For a fin base boundary condition, convection from the inner fluid to the inner wall, conduction from the inner wall to the fin base and conduction through the fin base are considered. Heat loss and fin efficiency are represented as a function of the fin base thickness, base height, inner fluid convection characteristic number, fin tip length and fin shape factor. One of the results shows that heat loss increases while fin efficiency decreases as the fin shape factor increases.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1259-1265
• /
• 2013

무선 LAN과 같은 전파환경 내에서 무선 AP 등의 적절한 배치를 통하여 효율적인 서비스 반경을 확보할 수 있다. 실험을 위해서 FDTD법을 이용하여 정식화하고, 무선 AP 대신에 계산 공간의 임의 위치에서 가우시안 펄스를 입력하였다. 장애물의 위치에 따른 구조적 영향을 고려하고 이에 따른 수신 이득을 계산하였다. 장애물은 완전 도체 또는 콘크리트 벽면으로 모델링하고, 장애물을 사이에 둔 송신점과 수신점 사이에서의 회절효과 등의 영향을 평가하였다.