Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of the Dynamic Behavior and Lubrication Characteristics of a Small Reciprocating Compressor

소형 왕복동 압축기의 동적 거동 및 윤활특성 해석

  • 김태종 (부산대학교 기계공학부 기계기술연구소)
  • Published : 2003.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a study on the dynamic behavior and lubrication characteristics of a reciprocating compression mechanism used in small refrigeration compressor is performed. In the problem formulation of the compressor dynamics, the viscous frictional force between piston and cylinder wall is considered in order to determine the coupled dynamic behaviors of piston and crankshaft. The solutions of the equations of motion of the reciprocating mechanism along with the time dependent Reynolds equations for the lubricating film between piston and cylinder wall and oil films of the journal bearings are obtained simultaneously. The hydrodynamic forces of journal bearings are calculated using finite bearing model and Gumbel boundary condition. And, a Newton-Raphson procedure was employed in solving the nonlinear equations of piston and crankshaft. The results explored the effects of design parameters on the stability and lubrication characteristics of the compression mechanism.

Keywords

References

  1. Ishii N., Imaichi K., Kagoroku N., and Imasu K., 1975, 'Vibration of a Small Reciprocating Compressor,' ASME Paper 75-DET-44
  2. Dufour R., Hagopian J. Der and Lalanne M., 1995, 'Transient and Seady Sate Dnamic Bhavior of Sngle Clinder Cmpressors: Pediction and Eperirnents,' Journal of Sound and Vibration, Vol. 181, No.1, pp. 23-41 https://doi.org/10.1006/jsvi.1995.0123
  3. Li, D. E, Rohde, S. M., and Ezzat, H. A., 1983, 'An Automotive Piston Lubrication Model,' ASLE Transactions, Vol. 26, No.2, pp. 151-160 https://doi.org/10.1080/05698198308981489
  4. Zhu, D., Cheng, H. S., Arai, T, and Hamai, K., 1992, 'A Numerical Analysis for Piston Skirts in Mixed Lubrication Part I: Basic Modeling,' Journal of Tribology, Vol. 114, pp. 553-562 https://doi.org/10.1115/1.2920917
  5. Nakada, T., Yamamoto, A. and Abe, T., 1997, 'A Numerical Approach for Piston Secondary Motion Analysis and its Application to the Piston Related Noise,' SAE paper No. 972043
  6. Cho, S. H., Ahn, S. T and Kim, Y. H., 2000, 'A Model of Collision Point to Estimate Impact Force Related to Piston Slap,' Journal of KSNVE, Vol. 10, No.3, pp. 474-479
  7. Prata, A. T, Fernando Julio R. S., and Fagotti, F, 2000, 'Dynamic Analysis of Piston Secondary Motion for Small Reciprocating Compressors,' Trans ASME, Journal of Tribology, Vol. 122, pp. 752-760 https://doi.org/10.1115/1.1314603
  8. Kim, T. J., 'Numerical Analysis of the Piston Secondary Dynamics in Reciprocating Compressors,' KSME International Journal, Vol. 17, No.3, pp. 350-356
  9. Kirk, R. G and Gunter E. J., 1975, 'Short Bearing Analysis Applied to Rotor Dynamics, Part 1: Theory,' Journal of Lubrication Technology, April, pp. 319-329
  10. Booker, J. F., 1971, 'Dynamically-Loaded Journal Bearings: Numerical Application of the Mobility Method,' ASME Journal of Lubrication Technology, January, pp. 168-176
  11. Goenka, P. K., 1984, 'Dynamically Loaded Journal Bearings: Finite Element Method Analysis,' ASME Journal of Tribology, Vol. 106, pp. 429-439 https://doi.org/10.1115/1.3260954
  12. Brewe, D. E., 1986, 'Theoretical Modeling of the Vapor Cavitation in Dynamically Loaded Journal Bearings.' ASME Journal of Tribology., Vol. 108, pp. 628-638 https://doi.org/10.1115/1.3261288
  13. Kim, T. J. and Han, D. C., 1998, 'Dynamic Behavior Analysis of Scroll Compressor Crankshaft Considering a Cavitation Phenomenon in Dynamically Loaded Journal Bearings,' Transaction of KSME, A, Vol. 22, No.8, pp. 1375-138
  14. Kim, T. J., 2002, 'Dynamic Analysis of the Small Reciprocating Compressor Considering Viscous Frictional Force of a Piston,' Transaction of the KSNVE, Vol. 12, No. 11, pp. 904-913 https://doi.org/10.5050/KSNVN.2002.12.11.904