• Archives of Plastic Surgery
• /
• 제48권2호
• /
• pp.175-178
• /
• 2021

The umbilicus is an important aesthetic component of the abdomen; therefore, its absence is both cosmetically and psychologically distressing to the patient. However, loss of the umbilicus during abdominal surgical procedures is often unavoidable. Umbilical reconstruction is aimed at obtaining a natural, three-dimensional appearance. We propose a simple method for immediate umbilical reconstruction with good long-term results. This technique was used successfully on a patient who underwent tumor excision. A 49-year-old woman presented with a large mass, measuring 5.8×4.0 cm, on her umbilicus. The mass, an epidermal cyst, developed after laparoscopic uterine myomectomy 5 years earlier. Complete excision of the mass resulted in a large defect, and immediate umbilical reconstruction was planned. Our procedure involved apposing and anchoring two opposing flaps onto the abdominal wall, so that the umbilicus would retain its depth over a long period of time. Negative-pressure wound therapy was applied for 72 hours as a mild compressive dressing. No complications were encountered. The healing process was uneventful and the aesthetic outcome was pleasing; a natural-appearing navel was created. The patient was satisfied with the end result. This technique provides a permanent and sufficient depression for the umbilicus.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.359-364
• /
• 2020

Numerical investigation of the groove trap effect with variation in the groove-edge radius of curvature is presented here. The trap effect is evaluated in a two-dimensional sliding bearing using computational fluid dynamics (CFD). This simulation is based on the discrete phase model (DPM) and standard k - ε turbulence model using commercial CFD software, FLUENT. The numerical results are evaluated by comparisons with streamlines and particle trajectories in the grooves. Grooves are applied to various lubrication systems to improve their lubrication characteristics, such as load carrying capacity increment, leakage reduction, frictional loss reduction, and preventing three-body abrasive wear due to trapping effect. This study investigates the grove trapping effect for various groove-edge radius of curvature values and Reynolds numbers. The particle is assumed to be made of steel, with a circular shape, and is injected as a single particle in various positions. One-way coupling is used in the DPM model because the single particle injection condition is applied. Further, the "reflect" condition is applied to the wall boundary and "escape" condition is used for the "pressure inlet" and "pressure outlet" boundaries. From the numerical results, the groove edge radius is found to influence the groove trap effect. Moreover, the groove trap effect is more effective when applying the groove edge radius.

• Structural Engineering and Mechanics
• /
• 제77권6호
• /
• pp.819-830
• /
• 2021

To evaluate the performance of concrete load bearing walls in a structure under horizontal loads after being exposed to real fire, two steps were followed. In the first step, an experimental study was performed on the thermo-mechanical properties of concrete after heating to temperatures of 200-1000℃ with the purpose of determining the residual mechanical properties after cooling. The temperature was increased in line with natural fire curve in an electric furnace. The peak temperature was maintained for a period of 1.5 hour and then allowed to cool gradually in air at room temperature. All specimens were made from calcareous aggregate to be used for determining the residual properties: compressive strength, static and dynamic elasticity modulus by means of UPV test, including the mass loss. The concrete residual compressive strength and elastic modulus values were compared with those calculated from Eurocode and other analytical models from other studies, and were found to be satisfactory. In the second step, experimental analysis results were then implemented into structural numerical analysis to predict the post-fire load-bearing capacity response of the walls under vertical and horizontal loads. The parameters considered in this analysis were the effective height, the thickness of the wall, various support conditions and the residual strength of concrete. The results indicate that fire damage does not significantly affect the lateral capacity and stiffness of reinforced walls for temperature fires up to 400℃.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1890-1901
• /
• 2022

We have assessed the applicability of the thermal-hydraulic system analysis code, SPACE, to a small modular reactor called SMART. For the assessment, the experimental data from a scale-down integral-test facility, SMART-ITL, were used. It was conformed that the SPACE code unrealistically calculates the safety injection flow rate through the CMT and SIT during a small-break loss-of-coolant experiment. This unrealistic behavior was due to the overprediction of interfacial heat transfer at the steam-water interface in a vertically stratified flow in the tanks. In this study, a special thermal-hydraulic component model has been developed to realistically calculate the interfacial heat transfer when a strong non-equilibrium two-phase flow is formed in the CMT or SIT. Additionally, we developed a special heat structure model, which analytically calculates the heat transfer from the hot steam to the cold tank wall. The combination of two models for the tank are called the special component model. We assessed it using the SMART-ITL passive safety injection system (PSIS) test data. The results showed that the special component model well predicts the transient behaviors of the CMT and SIT.

• 한국추진공학회지
• /
• 제26권6호
• /
• pp.53-61
• /
• 2022

본 연구에서는 CBT(Closed Bomb Test)시험을 통하여 고체추진제의 연소효율을 추정하는 방법을 제시하였다. CBT는 수백 기압에서 작동하므로 실기체의 영향을 고려하기 위해 Noble-Abel 상태방정식을 적용하였다. 또한 밀폐용기 벽면으로 발생하는 열손실을 고려하였다. 그레인의 연소로 인한 그레인의 체적 변화율 계산은 형상 함수(Form Function)를 적용하였으며, 총 8개의 다른 형태 그레인의 연소 효율을 도출하였다. 본 연구에서 제시한 이론모델의 적절성을 실험 결과인 압력-시간 선도와 비교하여 나타내었다. 그레인 형상과 추진제의 충진량에 따른 연소효율을 도출하였다.

• 대한중풍순환신경학회지
• /
• 제10권1호
• /
• pp.54-61
• /
• 2009

Arteriosclerosis is a pathologic term that contains hardening of arterial wall, loss of arterial elasticity and stenosis of artery. To diagnose this disease, conventional angiography, MRA, transcranial doppler ultrasonography are commonly used. And it causes various clinical phases by a region of the disease. In oriental medicine, arteriosclerosis is classified into congested fluids(痰飮), blood stasis(瘀血), stagnation of Gi(氣滯) and treated by Herb-Med, acupuncture, cupping, moxibustion, and the like. The purpose of this study was to investigate the effect of oriental medical therapy on cerebral arteriosclerosis. A patient with cerebrovascular disease admitted due to dizziness, mild dysarthria, tinnitus, anxiety disorder and his Brain MRA showed severe arteriosclerosis in right anterior cerebral artery(ACA) and middle cerebral artery(MCA). Every day, we administered to patient Herb Med and Herb pills. Also, acupuncture, moxibustion were done, too. As a result of the treatment, the patient's follow up Brain MRA showed improved state of ACA stenosis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.277-278
• /
• 2018

Improvement of insulation performance of buildings is a major part. Adiabatic method The adiabatic method minimizes the heat loss of the building. External insulation uses insulation to prevent fire. Ambient air hazards are less prone to fire. When a fire occurs, a phenolic pattern is formed and bond strength with the wall increases. EPS insulation and phenol foam were used to compare external heat transfer and external heat transfer. The heat transfer properties of phenolic foam and styrofoam were evaluated as follows. In the mortar and styrofoam structure, the problem of styrofoam reaching the burning point occurred before the collapse of the mortar, and the phenol foam had a problem in that when the direct fire was continued on the phenol foam. The characteristics of continuous infiltration appeared. In the case of mortar and phenol foam + styrofoam, the heat penetrated into the interior due to the shrinkage due to the shrinkage of the carbon screen on the phenol foam. However, when reinforced with glass mesh on the outer surface, And to reduce infiltration.

• 방사성폐기물학회지
• /
• 제21권3호
• /
• pp.359-370
• /
• 2023

The thermal integrity of spent nuclear fuels has to be maintained during their long-term dry storage. The detailed temperature distributions of spent fuel assemblies are essential for evaluating the integrity of their dry storage systems. In this study, a subchannel analysis model was developed for a canister of a single fuel assembly using the COBRA-SFS code. The thermal parameters affecting the peak cladding temperature (PCT) of the spent fuel assembly were identified, and sensitivity analyses were performed based on these parameters. The subchannel analysis results indicated the presence of a recirculation flow, based on natural convection, between the fuel assembly and downcomer region. The sensitivity analysis of the thermal parameters indicated that the PCT was affected by the emissivity of the fuel cladding and basket, convective heat transfer coefficient, and thermal conductivity of the fluid. However, the effects of the wall friction factor of the canister, form loss coefficient of the grid spacers, and thermal conductivities of the solid materials, on the PCT were predominantly ignored.

• 박물관보존과학
• /
• 제3권
• /
• pp.43-50
• /
• 2001

국립중앙박물관은 용산 새 박물관의 전시 유물로 선정된 중앙아시아 벽화의 연차적인 보존처리를 위해 "독립행정법인 일본 동경문화재연구소"와 공동연구를 모색하게 되었다. 2001년에 본4074, 본4096 작은 벽화편 2점의 보존처리를 시작하면서 벽화의 균열 박락 등 손상상태, 구조와 구성재료, 이전 보존처리에서 적용된 재료와 방법에 대한 기초조사를 실시하였다. 조사결과 본4074, 본4096 2점의 벽화는 흙과 지푸라기를 반죽하여 만든 벽체에 석고를 발라 바탕으로 하고 그 위에 채색을 한 것으로 나타났으며 벽체 속에 포함된 지푸라기의 방사선 탄소연대측정 결과 본 벽화는 10세기 말에서 13세기 초에 만들어진 것으로 나타났다. 또한 X-선회절 분석 결과 화면의 흰색 바탕은 gypsum[Ca(SO₄)·2H₂O]과 CaSO₄, Calcite(CaCO₃)가 적색계통은 연단(鉛丹:Pb₃O₄)과 led arsenate[Pb(As₂O₆)], 녹색계통은 Cuprite(Cu₂O)와 arsenolite(As₂O₃), arsenic oxide(As₂O₄) 등이 사용된 것으로 조사되었다.

• Nuclear Engineering and Technology
• /
• 제18권3호
• /
• pp.200-208
• /
• 1986

원자로 냉각 계통의 배관 파열에 근거한 냉각재 상실 사고를 방출계수 0.4에 대하여 분석하였다. 분석은 원자로 냉각계통의 배관 파열에 의하여 발생된 감압부터 노심 복구까지의 전 과도 상태를 포함한다. 계통 열수력과 핵연료 성능 평가를 위하여 BLOWDOWN 단계에서는 RELAP4/MOD6-EM 코드와 RELAP4/MOD6-HOT CHANNEL 코드를 사용하였으며 REFLOOD 단계에서는 RELAP4/ MOD6-FLOOD 코드와 TOODEE2 코드를 각각 사용하였다. LOWER PLENUM 충전을 고려하기 위하여 DOWNCOMER에서 증기-물역방향 유동과 과열벽효과를 근사하여 간단한 해석적 모델이 개발되었다. EOB 발생시의 정보를 근거로 하여 재충전지속 시간과 초기 복구 온도가 계산되었으며 RELAP4/MOD6에 의한 분석결과와 비교하여 상당한 일치를 보였다. 또한, 조기 EOB 발생에 영향을 미치는 계통변수의 연구가 수행되어졌다. DOWNCOMER와 UPPER HEAD사이의 마찰손실이 조기 EOB 발생에 지대한 영향을 미쳤으며 적당한 마찰손실계수의 선택을 통하여 조기 EOB 발생을 방지할 수 있었다. 노심 nodalization이 여섯 개인 경우와 세 개인 경우의 분석 결과가 계통열수력학적 면에서 유사한 결과를 나타내지만, 좋은 결과를 얻기 위하여 전자의 경우가 요구된다.