• 대한기계학회논문집B
• /
• 제28권3호
• /
• pp.315-323
• /
• 2004

An electrical cascade impactor is a multi-stage impaction device to separate airborne particles into aerodynamic size classes using particle charging and electrical detection techniques. A Faraday cage and an aerosol charger, which are basic components of the electrical cascade impactor, were designed and evaluated in this study. The low-level current response of the Faraday cage was investigated with changing particle size and air flow rate by using sodium chloride (NaCl) particles. The response of the prototype Faraday cage was very similar to that of a commercial aerosol electrometer (TSI model 3068) within ${\pm}$5% for singly-charged particles. The response linearity of the prototype Faraday cage could be extended up to flow rate of 30 L/min. For the performance evaluation of the aerosol charger the monodisperse liquid dioctyl sebacate (DOS) particles, with diameters of 0.1∼0.8$\mu\textrm{m}$, were generated using spraying from an atomizer followed by evaporation-condensation process. Typical performance parameters of the aerosol charger such as P$.$n, wall loss, and elementary charges per particle were evaluated. The performance of the prototype aerosol charger was found to be close to that of the aerosol charger used in an electrical low pressure impactor (ELPI, Dekati).

• Applied Microscopy
• /
• 제8권1호
• /
• pp.1-8
• /
• 1978

The aim of this research was to discover the action mechanism of various antituberculosis agents (isoniazid, paraaminosalicylic acid and streptomycin) which act on Mycobacteria tuberculosis hominis $H_{37}R_v$ and also to study the relationship of ultrastructural changes and the growth pattern in Mycobacterium tuberculosis hominis. The ultrastructural change was observed with an electron microscope while the growth pattern was studied through in vitro culture. The results are summarized as follows: 1. The ultrastructural changes found in the group treated only with isoniazid were the loss of nuclear materials and the appearence of electron dense granules. 2. In the group treated with paraaminosalicylic acid, thickening of nuclear filaments and meso some arrangement disorders were observed. 3. In the group treated with streptomycin, the ribosome particles appeared indistinct and the cytoplasm was denaturalized. 4. In the group cross treated with all three agents, all the ultrastructural changes mentioned above could be observed in the cell just as they appeared in the single treated groups. 5. In all of the single and in the crossly treated group, there were no significant changes note in the cell wall or cytoplasmic membranes of any of the cells observed. 6. In the cultural data in vitro, through the crossly treated group and single treated group. growth was observed in 3-5 weeks of culture.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.54-64
• /
• 1995

The effects of swirl on early flame development and late combustion characteristic were investigated using a high speed single-shot visualized 51 engine. LDV measurements were performed to get better understanding of the flow field in this combustion chamber. Spark plugs were located at half radius (R/2) and central location of bore. High speed schlieren photographs at 20,000 frames/sec were taken to visualize the detailed formation and development of the flame kernel with cylinder pressure measurements. This study showed that high swirl gave favorable effects on combustion-related performances in terms of the maximum cylinder pressure and flame growth rate regardless of spark position. However, at R/2 ignition the low swirl shown desirable effects at low engine speed gave worse performances as engine speed increased than without swirl. There were distinct signs of slow-down in flame growth during the period when the flame front expanded from 2.5mm in radius until it reached 5.0mm apparently due to the presence of ground electrode. There seemed to be heat transfer effect on the flame expansion speed which was evidenced in high swirl case by the slowdown of the late flame front presumably caused by relatively large heat loss from burned gas to wall compared with low- or no-swirl cases.

• Journal of Trauma and Injury
• /
• 제28권3호
• /
• pp.219-221
• /
• 2015

Subclavian injuries in blunt trauma are reported in less than 1% of all arterial injuries or chest related injuries. We report a female 68 yr-old patient whom has visited our emergency center due to a motorcycle traffic accident with complaints of right chest wall and shoulder pain. Her injury severity score was 22 and she was found with a comminuted clavicle fracture and subclavian artery injury. She developed delayed symptoms of pallor, pain and motor weakness with loss of pulse in her right arm. Attempts at intervention failed and thus, she underwent emergency artificial graft bypass from her subclavian artery to her brachial artery. Her postoperative course was uneventful and she is happy with the results. Although rare, a high index of suspicion for the injury must be noted and the inevitable surgical option must always be considered.

• Archives of Plastic Surgery
• /
• 제45권6호
• /
• pp.593-597
• /
• 2018

Sternal malunion, or loss, developed after a median sternotomy cannot only be difficult to manage and treat, but also may diminish one's quality-of-life drastically. The technique presented here represents a multispecialty approach in one stage for the reconstruction of an unstable thoracic cage. The procedure utilized a donated sternum and ribs. The sternum with ribs harvested from a single donor included adipose derived stromal vascular fraction (ADSVF) cells with marrow also from the same donor. Autologous muscle flaps, stabilized with acellular dermal matrix were utilized to provide a robust blood supply to the ADSVF cells and bone grafts. Acellular dermal matrix was used to construct the ribs and stabilize the plugs of stem cells and bone. These procedures, in the hands of multispecialty physicians, have led to several successful reconstructions involving complex chest wall deformities. This surgical intervention was performed in a one stage operation. This represents the first successful complete sternal transplant in a patient with return to normal activities and increased quality-of-life.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.219-222
• /
• 2005

Recently, the interest of the engine capacity and environment of the atmosphere is increasing, so the researches for the engine capacity have been conducted for a long time. But the internal environment of an automotive engine is very severe. A piston is exposed to combustion gas of over $2000^{\circ}C$ and strong friction is occurred by high speed motion in the cylinder. The fraction between piston and wall of the cylinder causes the increase of temperature in the engine. The temperature of the engine has an effect on the engine capacity. If the temperature is high, the capacity of the engine is low. So we have to maintain the optimum temperature. To maintain the optimum temperature, the enough flow rate of the engine oil is needed. The oil jet is used to control the flow rate of the engine oil and supply the engine oil to the piston and cylinder. The purpose of this study is to check the mass flow rate of the engine oil and the characteristics of internal flow of the oil jet. Flow pattern of the engine oil is very important because it concludes the loss in the oil jet. This study is the previous research about the oil jet and we will consider the movement of the ball check valve to get more accuracy result.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1406-1416
• /
• 2017

In complex and large-scale industries, properly designed fault detection and identification (FDI) systems considerably improve safety, reliability and availability of target processes. In thermal power plants (TPPs), generating units operate under very dangerous conditions; system failures can cause severe loss of life and property. In this paper, we propose a bagged auto-associative kernel regression (AAKR)-based FDI approach for steam boilers in TPPs. AAKR estimates new query vectors by online local modeling, and is suitable for TPPs operating under various load levels. By combining the bagging method, more stable and reliable estimations can be achieved, since the effects of random fluctuations decrease because of ensemble averaging. To validate performance, the proposed method and comparison methods (i.e., a clustering-based method and principal component analysis) are applied to failure data due to water wall tube leakage gathered from a 250 MW coal-fired TPP. Experimental results show that the proposed method fulfills reasonable false alarm rates and, at the same time, achieves better fault detection performance than the comparison methods. After performing fault detection, contribution analysis is carried out to identify fault variables; this helps operators to confirm the types of faults and efficiently take preventive actions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.306-309
• /
• 2006

슬롯을 이용한 충격파와 난류 경계층의 간섭유동의 피동제어에 관한 연구가 이루어졌다. 슬롯의 다양한 형상 변화가 간섭유동에 미치는 영향이 관찰되었으며, 이를 위하여 간섭유동 후방에서 피토/벽압력 분포 및 쉴리렌, 오일막 간섭 줄무늬 형상과 같은 유동가시화 정보 등이 얻어졌다. 특정한 슬롯적용의 경우, 충격파를 통한 전압손실의 감소가 관찰되었으나 경계층의 두께는 두꺼워지는 것으로 나타났다.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.37-41
• /
• 2020

The Nuclear containment building is a main safety-related structure that performs shielding and conservation functions to prevent highly radioactive materials from leakage to the outside environment in the case of various environmental conditions and postulated accidents. The containment building contains a reactor, steam generator, pressurizer, tank, reactor coolant system, auxiliary system and engineering safety system, and is designed so that highly radioactive materials above the limits specified in 10 CFR 100 do not escape to the outside environment in the case of LOCA(Loss of Coolant Accident) for instance. The containment metal liner plate(CLP) is a carbon steel plate with a nominal plate thickness of 6 mm, which functions as a mold for the wall and dome of the containment building when concrete is filled, fulfills airtightness to prevent leakage of seriously radioactive materials. In recent years, backside corrosion was found on the liner plate in some domestic nuclear power plants. The main cause of backside corrosion was unfilled concrete. In this paper, an inspection technique of assessing filling suitability for CLP backside concrete is developed. Results show that the validity of inspection technique for CLP backside concrete using vibration sensor is successfully verified.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.111-118
• /
• 2001

Many previous researches on the premixed flame in a tube have treated the unsteady flame behaviors but more detailed and fundamental research has been necessary. The study on the flame stabilization condition in a tube and the unsteady behaviors were carried out in recent years. In this paper, a mean velocity variation larger than the burning velocity was introduced to the stabilized flame for a period longer than the reaction time scale in order to examine the unsteady behavior of flame propagation. Through our previous work it was found that the effects of non-unity Lewis number on the flame extinction was negligible in the extinction by the boundary layer even though they were important in the extinction by the acoustic instability. In this paper we carried out an analytic approach to explain the previous experimental results. It showed that the heat loss, from a flame to the wall, is not a sufficient condition but a required one for the growth of the extinction boundary layer. In addition, the quenching and the flame stretch, under a strong unsteady flow field, are the main causes of the eventual extinction.