• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.425-436
• /
• 2016

The Yakhyeon catholic church (Historic Site No. 252 in Korea) that was constructed in 1892 has been the first western brick structure to ever have existed and one of the most important historical materials in the Korean modern architecture. After a fire had broken out at the catholic church in 1998, the stained glass on the back wall, the slab glass (dalle de verre) introduced by Lee Nam Guy in 1974, was repaired in 1999 because of singe scorch and water leakage. An analysis of the coloration elements showed that yellow, red and green included Zn, K and Cd, respectively. The glass of red contained Se, dark green contained Mn and Cr, and blue contained Pb and S. According to material analysis, the masonry joint was identified dolomite ($CaMg(CO_3)_2$) and calcite ($CaCO_3$), which was observed plate, columnar, rhombic and square of crystalline particles. Meanwhile, ultrasonic velocity in the stained glass recorded low speed in the middle and lower right of the window (an average of 4,130 m/s). And the joint was measured the lowest physical properties of the top left and middle of the window (an average of 2,053 m/s). This study have showed that extensive physical damage was founded to the left and middle rather than the right side. In this respect, more research in needed to conserve the correlation between color and physical properties.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.347-361
• /
• 2009

The Pohang Chilpori is the area with abundant petroglyphs in Korea. The form of the shield, female sex organs, and yut board on the outcrops or float rocks which are composed of the rhyolitic rock are engraved on Chilpori and Shinheungri Petroglyphs. The rhyolitic rock is composed of the phenocryst and groundmass with quartz and feldspar. The rock surface shows mostly yellowish brown color and the rock surface is very irregular by serious weathering, and illite and kaolinite, a kind of the clay minerals, are produced. Deterioration aspects are mainly of surface exfoliation, grain peel-off, damages, scribbling. Chilpori Petroglyph (1) plane has been eroded by running water, in (2) plane has been abrased is on the rock surface, in (3) plane shows surface exfoliation and the various part of the rock surface in plane (4) has become the soil. The corrasion and black phenomenon of the Shinheungri Petroglyph (1) plane was formed by running water, and surface exfoliation and scribbling in plane (2) is serious. Deterioration factors are geomorphologic states, plants, rock of weak to weathering, and artificial influence such as a scribbling and a forest fire. For conservation of the these petroglyphs, study for rock surface conservation and the arrangement of around petroglyphs and construction of water wall are necessary.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.3
• /
• pp.414-421
• /
• 2012

Moisture content of muffin tended to increased as increasing mixing rate of maesangi. For crude protein, sample group of 9% replaced by maesangi powder was the highest. For crude fat and crude ash, there was no significant difference among sample groups. The average height of muffin was 4.7 cm, but was no significant difference among sample groups. Volume of muffin has been gradually increased as increasing mixing rate of maesangi powder, but was no significant difference among sample groups. From the SEM (scanning electron microscope) result, thick cell wall and rough blowholes were appeared. L-, a and b-values of muffin was declined as per increase of mixing rate of maesangi powder. Hardness was inclined as per increase of mixing rate of maesangi powder. There were significant differences between sample groups and reference group for adhesiveness, springiness and cohesiveness, but was no significant difference among sample groups. For gumminess, sample group of 9% replaced by maesangi powder was the highest, but there were no significant difference from sample groups of 3% and 6% replaced by maesangi powder. Chewiness was inclined as per increase of mixing rate of maesangi powder, and sample group of 9% replaced by maesangi powder was the highest. From sensory test result, sample group of 9% replaced by maesangi powder was the highest for color, and there were significant differences among sample groups. Sample group of 6% replaced by maesangi powder was the highest for flavor and taste, and there were significant differences among sample groups. Sample groups of 6% and 9% replaced by maesangi powder were the highest for texture. Sample group of 9% replaced by maesangi powder was the highest for overall preference. From all these results, the most suitable one would be the sample group of 9% replaced by maesangi powder.

• Culinary science and hospitality research
• /
• v.22 no.7
• /
• pp.203-221
• /
• 2016

This study aims to analyze the impact of servicescape on the perceived values and brand attitude of coffee customers. In order to archive our research objects, current study employed SPSS 22.0 statistal program. The summary is as follows. First, it was revealed that the servicescape of coffee shops has a positive influence on perceived value. Second, the servicescape of coffee shop has a positive influence on brand attitude. And perceived value of the customer has a positive impact on customer brand attitude. Based on the results, this research has concluded some theoretical suggestions as follows. First, in case of brand coffee shop, it was analyzed that the attractions of interior design color, floor and wall interior, and structure has influenced on the differentiated values of customers. Also, the accessability shows that the brand coffee shops with parking facilities along with the convenience provided by the off-site facilities make customers highly recognize the brand values. In addition, the results found that the factor of service condition becomes a determining factor. Thus, current study will contribute to consider the various elements of service scape when new business develop as well as redesign the previous stores.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.17-30
• /
• 2020

An optical televiewer is a geophysical logging device that produces continuous high-resolution full-azimuth images of a borehole wall using a light-emitting-diode and a complementary metal-oxide semiconductor image sensor to provide valuable information on subsurface discontinuities. Recently, borehole imaging logging has been applied in many fields, including ground subsidence monitoring, rock mass integrity evaluation, stress-induced fracture detection, and glacial annual-layer measurements in polar regions. Widely used commercial borehole imaging logging systems typically have limitations depending on equipment specifications, meaning that it is necessary to clearly verify the scope of applications while maintaining appropriate quality control for various borehole conditions. However, it is difficult to directly check the accuracy, implementation, and reliability for outcomes, as images derived from an optical televiewer constitute in situ data. In this study, we designed and constructed a modular fractured borehole model having similar conditions to a borehole environment to report unprecedented results regarding reliable data acquisition and processing. We investigate sonde magnetometer accuracy, color realization, and fracture resolution, and suggest data processing methods to obtain accurate aperture measurements. The experiment involving the fractured borehole model should enhance not only measurement quality but also interpretations of high-resolution and reliable optical imaging logs.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.397-405
• /
• 2018

Currently, there are very few studies on Korean wall paintings. Therefore, this study discusses the current conditions of wooden paintings and the characteristics of the adhesive agent in the painting layer separation. Korean land pine was chosen as the support, while white oysters shells, orpiment, red ocher, Noerok, and azurite were used as pigments. With four adhesive agents, including animal glue, Gelidium, methyl cellulose, and PVAc (caparol binder), a comparative experiment was conducted, by dividing them into two concentrations, of 0.5% and 1.5%. The temperature, humidity, and ultraviolet rays, which are contributing environmental factors in cultural assets after fixing, were artificially investigated. After deterioration, observed color difference, fixing, and the surface. Results showed that the animal glue strongly fixing all the colored layers compared to the other adhesives; however, azurite had a partial change when used outdoors. With Gelidium, which functioned similar to animal glue, the azurite was affected by the ultraviolet rays; nevertheless, despite the variations in temperature and humidity, it had the best gripping force compared to the other adhesive agents. Methyl cellulose was glossy at a high concentration, and was relatively strong against rapid changes in temperature and humidity. PVAc significantly reduced the binding force, compared to other adhesive agents.

• Economic and Environmental Geology
• /
• v.35 no.5
• /
• pp.407-420
• /
• 2002

The Buddhist Triad Cave in Gunwi (National treasure No. 109) consists of porphyritic biotite granite, and it has been deteriorated into microorganic smears, white films, brown rusts, granular decay, color changes, and joints by the same weathering factors as rain, moisture, temperature variation and microorganic living. Main origin is probably the rain that leaks into the cave along joints in Palgongsan granite, and then its moisture grows many microorganism and is frozen over during winter. The granites around the cave regularly develop two NEE and NWW joint sets that are conjugate to be a joint system. The NEE set extends far away with narrow joint spacings and affects the leakage of the rains, and is divided into 4 joint zones, among which J$_{m}$ and J$_{3}$ immediately affect the leaking water into the cave. An extensional Joint, in northern wall of the cave, was formed by toppling of the block between J$_{m}$and J$_{3}$joint zones from widening the Jm aperture by roots of a big pine tree, and passes through the J$_{m}$joint zone. This bypass allows no circulation of small rain, but a good circulation of heavy rain from influx to the cave for a long pathway. Many Joints and cracks, in the ceiling near the cave entrance, immediately get through the J$_3$ joint zone, and have a good circulation of small rain 10 mm. Both J$_{m}$and J$_{3}$ joint zones are, therefore, chief influxes that cause leakage of the rains.

• Korean Journal of Environmental Biology
• /
• v.32 no.3
• /
• pp.225-233
• /
• 2014

In this study, we investigated the changes in the physiological and histological traits of a sea squirt (Halocynthia roretzi) with the emergence of the soft tunic syndrome induced by the water temperature control (6, 9, 12, 15, 18, 21, 24 and $27^{\circ}C$). It was observed that the induction rate of the soft tunic syndrome was highest at $15^{\circ}C$, but lowest at $24^{\circ}C$. Based on the tunic color condition and contraction strength, the whole process were classified into 4 stages as S0, S1, S2 and S3. Interestingly, there were significant differences in oxygen consumption and filtration rate were observed during S0-S3. The most distinctive aspects were change of blood cell composition at stage S3, whereas multi-vacuole cell ratio was decreased by 1/2 and morula cell ratio expanded about 10 times during S0-S3. Further, change of organ structure started following the syndrome such as degeneration of epithelial cells, microfilaments, increment in hemocytes and damage in muscle fiber have been detected in tunic, siphon, branchial sac, body wall musculature and pyloric gland. Briefly, our study results indicated that the normal physiological functions of the sea squirt can be affected due to the soft tunic syndrome induced by water temperature.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.3 no.1
• /
• pp.31-47
• /
• 1979

1. The old Korean costume had two different kind of dress, one was a military uniform (Goon bok) for military only and the other was uniform (Yoongbok) for civilian and militarian. 2. The military uniform (Goonbok) were dressed under armour, was for war time. And the civilian and military uniform were dressed under Mo (Hat) and Po (Coat dress), was for War time or emergent case. 3. Armour were made of leather in ancient times but later they were made of metal. 4. In generally, armour is classified; 1) To protect neck 2) To protect shoulders and arms 3) To protect breast 4) To protect both legs 5) To protect hands 5. Armour and military uniform (Goonbok) for military only. at the time of three Nations (Ko-kuryo, Bakje. Silla) 1) Armour-a) Identified by found relics or ancient wall picture. b) They had improver! armour. c) Armour of three Nations were resembled each other. 2) Military uniform(Goonbok) a) The Jeogori reached to hip area was called Jangyoo. b) The pants were tight trousers. 6. Armour and military uniform (Goonbok) for military only at Koryo Dynasty. 1) They had improved armour like three nation's age. 2) They were made of iron. leather, paper or cloth 3) The color was white. puple. red. 4) Military uniform(Goonbok) a) Hat-(1) Banggak (2) Josamoja (3) Ibgak (4) Jakwan (5) Sabgak (6) Sumale (7) Jaragwan (8) Kummoja (9) Mubyunkwan (10) Pyungyunchek b) Dress-(l) Jayeisokade (2) Bosanghwa Gayendae (3) Hongbeja Rokrahansam (4) Jag- ongbok Hongeung (5) Jagongbok Jogeung (6) Kumyeisokdae (7) Bilapeja Rokrahansam (8) Jasupoto (9) Kumyei Honggung (10) Kumyei Dokuyeunsokdae (11) Bibosunghwa Dongokumdae (12) Bidaesuyei Kayeundae (13) Jasosulansam (14) Biyeiko (15) Chung-yei Dongsim Sokdae 7. Armour and military uniform of Lee Dynasty 1) Armour-a) the Helmets were attached with visor ar without visor, and later it was added the neck protecter. b) dresses were given various names according to the materials used. for example, Suiejakap or Kyungfunkap. 2) The military uniform (Goonbok) were composed by molip, Hyunchungsakpuja, Jundae, Soowhaja. 8. Military uniform (yoongbok) for civilian and militarian 1) The unifom was developped through Imjin war, Byungja war since the middle of Lee Dynasty. 2) The military uniform (Goonbok), (Yoongbok), armour were by the established dress reg-ulation of imperial ordinance dated April 8th, 1895 which falls 35th year of Kojong. the dress regulation was based upon the western uniform.