• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.310-318
• /
• 2008

This paper presents a parallel typed walking robot to improve walking space and stability region. The robot is designed by inserting an intermediate mechanism between upper leg mechanism and lower leg mechanism. The leg mechanism is composed of three legs and base, which form a parallel mechanism with ground. Seven different types of walking robot are invented by combining the leg mechanisms and an intermediate mechanism. Topology is applied to design the leg mechanism. A motor vector is adopted to determine Jacobian and a wrench vector is used to analyze dynamics of the robot. We explore the stability region of the robot from the reaction force of legs and compute ZMP including the holding force to contact the foot to a wall. This investigates a walking stability when the robot walks on the ground as well as on the wall. We examine the walking space generated by support legs and by swing legs. The robot has both a large positional walking space and a large orientational walking space so that it can climb from a floor up to a wall.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.481-484
• /
• 2016

Jansen mechanism is basic principal of walking robot. Because that mechanism have many link, walking robot can walk like animals. One of the feature is that space is existed between leg of walking robot and ground surface. So, it can walk through the non-uniform ground surface that have obstacle. In this paper, I will suggest design of walking robot that can walk on non-uniform ground surface effectively based on Jansen mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1495-1499
• /
• 2003

There is some equipment that helps user to exercise and to walk. But almost all equipments require some physical strength of their muscles. So we developed a system that could assist walking action of the people with lower-limb disability. The system called as walking stand adopted the balancing mechanism which assures the stable walking, and the 4 link-based mechanism that had 2 degrees of freedom on each leg. The walking stand uses four motors and has two sets of the special link-structure to simulate the human walking mechanism. With our system, even serious disabled with lower-limb disability may enjoy walking rehabilitation. And by adjusting the power, it can be used as the walking assistant mechanism instead of conventional wheelchairs. Experiments showed that our walking stand is applicable to the rehabilitation and also to the mobile device in our daily life for those people who do not have enough physical ability to walk by themselves.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.56-64
• /
• 2009

This paper presents a parallel typed walking robot which can walk in omni-direction and climb from a floor to a wall. We design a six D.O.F leg mechanism composed of three legs, which form a parallel mechanism with a base and a ground to generate arbitrary poses. Optimal design is conducted to maximize the walking space and the dexterity, which are normalized by the stroke of leg. Kinematic parameters are found to maximize the weighted optimal objectives. We design a triple parallel mechanism robot by inserting Stewart platform between the upper leg mechanism and the lower leg mechanism and examine the gaits when the robot walks on the ground and climbs from a floor to a wall. The analysis of walking space and dexterity for each gait shows that the triple parallel walking robot has a large walking space with a large stability region. We explore the possibility that the robot can climb from a floor to a wall. Investigating the gaits for the six steps proves that the robot can lift the foot up to the wall by combining the orientational walking space generated by three parallel mechanisms.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.493-497
• /
• 2016

Walking mechanism, there are many types. Prior to the modeling and design, we thought about a variety of mechanisms based on the Janssen mechanism to design a walking mechanism optimized for walking. The more the legs increases the stability of the structure, while the weight is heavy and if that advantage had the disadvantage, the legs are easier to walk in the utilization and structural aspects of the torque had fewer advantages. The disadvantage is that the instability mechanism, four-legged, but improve it and look forward to the idea of utilization and cost-effectiveness, its future utilization will be endless. To study this, we utilized a variety of software, such as m-sketch, Edison design program, we have seen the actual production through scientific experiments box.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.725-730
• /
• 2004

This paper has regarded mechanism design of cane-like passive type walking aid for the elderly using 3-RPS parallel manipulator. First, gait patterns of the elderly have been experimented. By means of motion capturing and image processing, we decided loaded forces and places of the cane when the elderly walked with a cane. Using these results we have developed a passive type walking aid. Second, the walking pattern has been simulated using dynamic analysis program, ADAMS and we find out the similarity between the real walking and the simulated walking. Finally after assuring the similarity, with adjusting the new mechanism design to the simulated walking we will decide whether the walking aid is safe and stable when the elderly walks with this cane-like walking aid. This paper will be basis for the development of the mechanism design applying 3-RPS parallel manipulator.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.463-466
• /
• 2016

This study has designed a walking mechanism that is able to pass by a variety of environments, such as slope, obstructions, special surface in there, the mechanism suggested by Janssen has shown an ideal bridge structure made of 11 joints. V in the study, these programs are use that is m-sketch, m-designer, Janssen mechanism optimization solver for the optimum design of m-sketch, 3D component reflecting the given strip dimension is used because there is a limit in the given. As a result, a stable mechanism for walking could be implemented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1593-1596
• /
• 1997

Because the leg mechanism of walking roblt affect on the mobility and energy efficiency, we focus on the design of new leg mechanism based on the previous leg mechanisms. We mention the deficiency of the previous leg mechanisms and propose a new leg mechanism that consists of a 2-d.o.f pantograph mechanism and a vertical linear actuator. The pantograph mechanism is attached to the horizontal plane of the body and the verical linear actuator is vertical to that plane. In order to design a quadruped walking robot, we consider the kinematics of the 2-d.o.f pantograph mechanism and the arrangement of twol linear motion guides that drive the pantograph mechanism.

• The Journal of Korea Robotics Society
• /
• v.11 no.2
• /
• pp.108-114
• /
• 2016

This paper presents a sensor-based cane mechanism for walking aid of the visually impaired person. We also describe an approach to decide properly the length of the specified cane mechanism. The cane mechanism has some sensors to identify the possibility of a collision between the cane user and an object and/or a person, and a signal processing unit that enables the user to recognize such a collision is attached in the mechanism. Thus, the walker using this cane can recognize in advance the possibility of such a collision in his walking process. Consequently, it is helpful for the visually impaired person to walk on a pedestrian road safely. The feature of the proposed cane mechanism and its availability have been shown through experimental works in a typical walking environment.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.467-468
• /
• 2016

The importance of the recent manufacturing industry have been made to invest in a lot of assistance and human resource development at the national dimension in which to rise again. However Learned in actual school education kinetic, and the use to how product design structural knowledge, Often it feels vague unlikely whether it is possible to derive an optimal product. In this study, by using the simulation-based Jansen Mechanism designed a walking robot, after optimization of the numerical consideration when designing for optimum walking motion, through simulation through the actual production resulting numerical information is examined whether valid. In addition, through the actual production was walking robot, to verify the validity of the simulation-based design.