• The Journal of the Korea Contents Association
• /
• v.20 no.5
• /
• pp.58-68
• /
• 2020

In this paper, we simulated disaster broadcast service using terrestrial UHD additional data. We looked at nine functions(warning alarm, location-based information, multilingual, re-viewing the title of breaking news, evacuation knack video, CCTV, clip video, wake up, automatic channel switching) by referring to ATSC 3.0 standards. Analyzing the advantages and problems of the proposed disaster broadcast. Expert interviews were conducted after a demonstration and explanation of terrestrial UHD disaster broadcast. They said that the problems with the technology were difficulty in using, obstruction of viewing, content creation problems, and problems with advertisers. In addition to the lack of simulation-based research, this research has provided an insight into the technology by showing it in a visible way. This helped shape the advantages and problems of technology.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.68-74
• /
• 2010

A sub-${\mu}$W CMOS Wien-Bridge oscillator for ultra low power (ULP) radio applications is presented. The Wien-Bridge oscillator is based on an non-inverting opamp amplifier with a closed-loop gain $1+R_2/R_1$ as a means of providing necessary loop gain. An additional RC network provides appropriate phase shift for satisfying the Barkhausen oscillation condition at the given frequency of 1/($2{\pi}RC$). In this design, we propose a novel loop gain control method based on a variable capacitor network instead of a rather conventional variable resistor network. Implemented in $0.18{\mu}m$ CMOS, the oscillator consumes only 560 nA at the oscillation frequency of 22 kHz.

• Journal of Chest Surgery
• /
• v.32 no.6
• /
• pp.588-590
• /
• 1999

It is now generalized to perform cardiac surgery in the patients with end-stage renal disease. The growing number of patients with chronic renal failure wake us up to the need to prepare for proper management. There are not only the prevalence of coronary artery disease, but also a great amount of valve dysfunction exist in this group. Peritoneal dialysis may be one of the obstacles for cardiopulmonary bypass but it is not a great hindrance in cardiac surgery with careful preparation and well organized perioperative care. The author has performed mitral valve replacement in a 33-year-old anuric female patient with chronic renal failure and severe mitral insufficiency. Preoperatively, the patient was kept in adequate fluid and electrolyte balance using peritoneal dialysis. Peritoneal dialysis continued and regulated according to the laboratory data in this patient during and after the surgery. She recovered well showing an uneventful course and was discharged on postoperative 1 th day.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.25-31
• /
• 2009

The most important component of wind turbine is rotor blades. The developing method of wind turbine was focused on design of rotor blade. By the way, the design of a rotating body is more decisive process in order to adjust the performance of wind turbine. For instance, the design allows the designer to specify the wind characteristics derived by topographical map. The iterative solver is then used to adjust one of the selected inputs so that the desired rotating performance which is directly related to power generating capacity and efficiency is achieved. Furthermore, in order to save the money for manufacturing the rotor blades and to decrease the maintenance fee of wind power generation plant, while decelerating the cut-in speed of rotor. Therefore, the design and manufacturing of rotating body is understood as a substantial technology of wind power generation plant development. The aiming of this study is building-up the profitable approach to designing of rotating body as a system for the wind power generation plant. The process was conducted in two steps. Firstly, general designing and it’s serial testing of rotating body for voltage measurement. Secondly, the serial test results above were examined with the CFD code. Then, the analysis is made on the basis of amount of electricity generated by rotor-blades and of cut-in speed of generator.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1039-1048
• /
• 2008

new computational procedure for the Non-Linear Vortex Lattice Method (NLVLM) is suggested in this work. Conventional procedures suggested so far usually involves inner iteration loop to update free vortex shape and an under-relaxation based iteration loop to determine the free vortex shape. In this present work, we suggest a new formula based on quasi-steady concept to fix free vortex shape which eliminates the need for inner iteration loop. Further, the ensemble averaging of the induced velocities for a given free vortex segment evaluated at each iteration significantly improves the convergence property of the algorithm without resorting to the under-relaxation technique. Numerical experiments over several low aspect ratio wings are carried out to obtain optimal empirical parameters such as the length of the free vortex segment, the vortex core radius, and the rolled-up wake length.

• Journal of the Korean Society of Costume
• /
• v.60 no.3
• /
• pp.66-83
• /
• 2010

Huafu is the traditional clothing of the Han Chinese as the significant cultural symbol of Chinese civilization. The resuscitation of Huafu is an exemplification for the pride of a nation, due to China's rapid economic development and a craze for Chinese cultures. Huafu's resuscitation is not only introducing the traditional design factors of Huafu into the contemporary fashion but also reflects the image of Chinese style created to modernize works. Through the study of the history of Huafu, it could be summarized that Ruqun(Zu-chin), Shenyi(Shen-yee), and Shan were the most important and typical types. The characteristics of Huafu were primary colors or strong contrast with achromatic colors, flora and fauna patterns, and geometric patterns. The clothing aesthetic of Huafu could be summed up as spacious, delicate, gorgeous, clandestine, and unconventional character. There were lots of elements in Huafu that could provide inspiration for contemporary fashion designers, such as forms, colors, patterns, details, and also the aesthetic. Based on the analysis of the Chinese designers who applied the elements of Huafu into contemporary fashion design, it could be recognized that the Chinese designer's works were made using the elements of traditional Huafu directly or using new fabrics and techniques to give a modern sense, but also embodies the Huafu's clothing aesthetic at the same time. In the wake of the resuscitation and publicity of Huafu, the essential factors of Huafu will be able to provide inspiration for designers not only for Chinese but also around the world.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.52.2-53
• /
• 2018

A stationary Type IV (IVs) radio burst was observed on September 24, 2011. Observations from the Nançay RadioHeliograph (NRH) show that the brightness temperature (TB ) of this burst is extremely high, over 10^11K at 150 MHz and over 10^8K in general. The degree of circular polarization (q ) is between -60%~-100%, which means that it is highly left-handed circularly polarized. The flux-frequency spectrum follows a power-law distribution, and the spectral index is considered to be roughly -3~-4 throughout the IVs. Radio sources of this event are located in the wake of the coronal mass ejection and are spatially dispersed. They line up to present a formation in which lower-frequency sources are higher. Based on these observations, it is suggested that the IVs was generated through electron cyclotron maser emission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1569-1580
• /
• 2016

For the 2.4 GHz active RFID to be successful in the market, one of the requirements is the increased battery life. However, currently we do not have any accurate power consumption estimation method. In this study we develop a simulation model, which can be used to estimate power consumption of tag accurately. Six different simulation models are proposed depending on collision algorithm and query command method. To improve estimation accuracy, we classify tag operating modes as the wake-up receive, UHF receive, sleep timer, tag response, and sleep modes. Power consumption and operating time are identified according to the tag operating mode. Query command for simplifying collection and ack command procedure and newly developed collision control algorithm are used in the simulation. Other performance measures such as throughput, recognition time for multi-tags, tag recognition rate including power consumption are compared with those from the current standard ISO/IEC 18000-7.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.7 s.238
• /
• pp.828-836
• /
• 2005

Impingement/effusion cooling technique is used for combustor liner or turbine parts cooling in gas turbine engine. In the impingement/effusion cooling system, the crossflow generated in the cooling channel induces an adverse effect on the cooling performance, which consequently affects the durability of the cooling system. In the present study, to reduce the adverse effect of the crossflow and improve the cooling performance, circular pin fins are installed in impingement/effusion cooling system and the heat transfer characteristics are investigated. The pin fins are installed between two perforated plates and the crossflow passes between these two plates. A blowing ratio is changed from 0.5 to 1.5 for the fixed jet Reynolds number of 10,000 and five circular pin fin arrangements are considered in this study. The local heat/mass transfer coefficients on the effusion plate are measured using a naphthalene sublimation method. The results show that local distributions of heat/mass transfer coefficient are changed due to the installation of pin fins. Due to the generation of vortex and wake by the pin fin, locally low heat/mass transfer regions are reduced. Moreover, the pin fin prevents the wall jet from being swept away, resulting in the increase of heat/mass transfer. When the pin fin is installed in front of the impinging let, the blockage effect on the crossflow enhances the heat/mass transfer. However, the pin fin installed just behind the impinging jet blocks up the wall jet, decreasing the heat/mass transfer. As the blowing ratio increases, the pin fins lead to the higher Sh value compared to the case without pin fins, inducing $16\%{\~}22\%$ enhancement of overall Sh value at high blowing ratio of M=1.5.

• Plant Biotechnology Reports
• /
• v.3 no.2
• /
• pp.157-165
• /
• 2009

Human erythropoietin (EPO) is a leading product in the biopharmaceutical market, but functional EPO has only been produced in mammalian cells, which limits its application and drives up the production costs. Using plants to produce human proteins may be an alternative way to reduce the cost. However, a recent report demonstrated that overexpression of the human EPO gene (EPO) in tobacco or Arabidopsis rendered males sterile and retarded vegetative growth, which raises concern whether EPO might interfere with hormone levels in transgenic plants. In the present study, we demonstrated that overexpressing EPO with additional 5'-His tag and 3' ER-retention peptides in tobacco did not cause any developmental defect compared to GUS plants. With our method, all 20 transgenic plants grew on selective medium and, further confirmed by PCR, were fertile. Most of them grew similarly compared to GUS plants. Only one transgenic plant (EPO2) was shorter in plant height but had twice the life span compared to other transgenic plants. When 11 randomly selected EPO plants, along with the abnormal plant EPO2, were subjected to RT-PCR analysis, all of them had detectable EPO transcripts. However, their protein levels varied considerably; seven of them had detectable EPO proteins analyzed by western blot. Our results indicate that overexpressing human EPO protein in plants does not have detrimental effects on growth and development. Our transformation systems allow us to further explore the possibility of glycoengineering tobacco plants for producing functional EPO and its derivatives.