• 제목/요약/키워드: WRIST

검색결과 1,161건 처리시간 0.027초

Stretch 소재를 사용한 여성용 Bodysuit Sleeve 원형 설계에 관한 연구 (A Study on the Women's Bodysuit Sleeve Block Construction Using Stretch fabrics)

  • 박진아
    • 한국의류학회지
    • /
    • 제29권12호
    • /
    • pp.1535-1545
    • /
    • 2005
  • 신축성 소재 여성용 바디수트 원형 설계에 관한 선행연구에서 개발된 바디수트의 진동둘레길이 항목을 적용한 소매원형 제도방법이 제안되었다 본 연구는 선행연구와 연속적 맥락에서, 첫째, 신축성 소재의 물성을 고려한 패턴축소율의 적용을 제시하고 둘째, 그에 따라 개발된 여성용 바디수트 소매원형의 제도방법의 단계별 서술을 통해 교육 및 산업분야에서의 사용을 목적으로 하였다. 본 연구를 위하여 광범위하게 사용되고 있는 기존의 소매원형 제도방법을 우선, 선정하여(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 그리고 Joseph-Armstrong 절충식 : T4) 분석하였다. 그 가운데 소매의 앞 뒤차가 반영되지 않는(i.e. T1) 것과 반영되는(i.e. T2, T3 그리고 T4) 방법으로 나누어 구분하고 그에 따른 바디수트 소매샘플을 선행연구와 동일한 신축성 소재$(wale: 50\%/course: 70\%)$를 사용하여 제작한 후, 5인의 전문평가단을 구성하여 그 외관과 동작적합성을 평가하였다. 외관평가에서 관찰된 항목은 앞, 옆, 뒤 바디수트 소매의 여유분, 중심선의 위치와 소매길이, 그리고 바디수트 몸판과의 조화정도의 총 13항목이었고, 쾌적성 평가에서는 전방수직, 측방수직, 측방수평 3동작을 통해 실험의의 동작적합성을 평가하였으며 최종적으로 외관과 동작성이 적절히 조화된 바디수트 소매원형을 제안하는 과정을 거쳤다. 외관평가에서 T3>T4>T2>T1 순서로 우수하게 평가되었으며, 동작적합성 평가에서는 T1>T4>T2>T3의 순으로 평가되어, 외관적으로는 여유분이 적어 당겨 보이는 이유로 점수가 낮아도 쾌적성에서는 오히려 죄어주는 것이 안정감이 있다고 분석되었다. 따라서 외관과 쾌적감의 균형을 고려하였을 때 최종적으로 T4,즉, 소재의 신축성에 따른 패턴축소율(전체소매길이 : 1.0RR, 소매산높이 : 0.7RR, 팔꿈치둘레: 0.9RR)이 반영되고, 진동둘레에 제로 이즈량을 부가하였으며, 앞뒤차가 반영된 바디수트 소매 원형 제도방법 이 제안되었다.

전완부(前腕部) 경혈(經穴) 취혈(取穴)에서 골도분촌법(骨度分寸法)과 일부법(一夫法)의 비교(比較) 연구(硏究) (Comparative study between proportional method and directional method in locating acupoints at forearm)

  • 박히준;채윤병;차웅석;박종배;이혜정;이향숙;인창식;고형균;김수영;최일환;김강식;문정배;배기태;유경환;육근영;정병주;손인철;임사비나
    • Korean Journal of Acupuncture
    • /
    • 제21권4호
    • /
    • pp.31-41
    • /
    • 2004
  • Background : The cun measurement system, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height. Conclusion : These findings suggest that the directional method is less likely dependable in locating acupoints than the proportional method because the influencing factors are different.

  • PDF

골프 드라이브 스윙시 구질 변화에 따른 운동학적 분석 (Biomechanics analysis by golf drive swing pattern)

  • 최성진;박종진;양동호
    • 한국운동역학회지
    • /
    • 제12권2호
    • /
    • pp.259-278
    • /
    • 2002
  • 본 연구에서는 볼 구질의 변화에 따른 스윙 동작의 운동학적인 변인을 3차원적으로 비교 분석하여 스윙 동작의 운동역학적인 원리를 제시하며, 볼 구질이 다른 스윙 동작의 차이점을 밝히는 데 목적이 있으며, 프로골퍼로 경력 3년 이상의 남자 선수 7명을 대상으로 스트레이트 성공, 페이드 성공과 실패로 구분하여 골프 스윙의 운동학적 변인들을 과학적으로 제시하기 위해 비교 분석한 결과 다음과 같은 결론을 얻었다. 페이드 성공시에는 임팩트를 지나서도 계속 손목의 각도가 근소한 차이로 줄어드는 것으로 나타났고 실패시에는 각 프레임의 각도가 규칙적으로 변하지 않게 나타났다. 이는 스트레이트 성공과 페이드 성공에 대한 손목각도의 차이가 영향을 미치는 것으로 나타나 다른 요인과 손목각도와의 관계를 분석하는 것이 필요하다고 하겠다. 페이드 실패의 경우는 임팩트시의 몸통 비틀림각도가 성공때 보다 작아지면서 클럽헤드가 오픈되지 못한 것으로 나타났다. 골프스윙의 형태의 변화로 인하여 어깨관절의 회전력을 더 많이 사용하여 파워을 증진시키기 위한 동작이며, 골프 스윙에서 어깨회전 운동은 축을 중심으로 회전하기 때문에 어깨회전각도의 차이는 없는 것으로 나타났다. 스트레이트 성공시 보다 페이드 성공시에 고관절의 회전각도가 점진적으로 일정하게 각이 커졌다. 이는 고관절의 회전을 더 크게 하여 지연히팅을 보다 자연스럽게 한 것으로 나타났다. 페이드 볼 구사시 임팩트 존에서 클럽의 페이스가 닫히는 것과 팔의 자연스러운 롤링 동작을 억제시키는 것으로 나타났다. 본 연구에서는 구질 변화에 따른 골프 스윙 동작을 스트레이트 성공, 페이드 성공과 실패시로 구분하여 운동학적 변인들을 3차원 동작 분석을 통하여 경기력 향사에 도움이 되고자 하였으며 앞으로 많은 연구자들이 각 종목에 있어서 경기력 향상을 위한 역학적인 분석이 계속 진행되어져야 할 것이다.

클럽 샤프트(Club Shaft) 특성에 따른 골프 스윙(Golf Swing)동작 분석 (Analysis of golf swing motion for specific properties of club shaft)

  • 김성일;김기형;김형수;이현섭;김진욱;안찬규;김희진
    • 한국운동역학회지
    • /
    • 제12권2호
    • /
    • pp.17-32
    • /
    • 2002
  • 본 연구는 클럽 샤프트의 대표적인 재질인 그라파이트(graphite)의 유연한(flexible) 클럽 샤프트(club shaft)의 특성에 따라 피험자가 운동학적(kinematics) 요인이 되는 관절의 각변위, 각속도, 각가속도, 클럽헤드의 속도와 가속도와 같은 변인들이 어떻게 적응하는지 비교 분석하여 보다 효율적인 드라이버 선택에 도움을 주며 샤프트 특성에 따른 신체관절의 움직임에 대한 자료를 제시하고자 하였다. 고속 카메라 2대의 속도는 500 fps로 하였고 각 regular,stiff, x-stiff, 자신의 클럽을 포함 각 4개의 클럽을 사용하여 각 클럽당 3번씩 촬영하였으며 목표방향에서 20m이상 벗어나는 경우의 촬영은 다시 촬영하였다. 본 연구에서는 디지타이징(digitizing)을 신체 9개 마커는 강체로 가정된 클럽과 신체분절 모델로 정의하였으며 2 대의 카메라(500fps)로부터 얻은 avi화일을 컴퓨터에 저장하고 자료로부터 Butterworth 6th order recursive digital filter를 사용하여 1차 자료를 smoothing 하고 DLT를 이용하여 3차원 좌표를 구성하도록 한다. 좌표값을 얻기 위하여 kwon3d v3.0을 이용하였다. 본 실험은 피험자 스스로 클럽의 특성에 따라 스윙의 속도를 달리 하기 때문에 스윙의 시간이 달라지며 어느 정도 클럽이 강성에 따라 스윙시간이 빨라지는 결과로 나타났다. 이것은 피험자가 샤프트가 강성(stiffness)에 따라 스윙 속도를 빨리 하게 되는 원인이 되는 것으로 생각된다. 어깨의 각변위는 클럽이 regular의 경우 임팩트에서 각속도를 계속 유지하고 있으며 stiff, x-stiff의 경우에는 어깨의 움직임이 임팩트에서 급격하게 감소되는 것을 알 수 있다. 이것은 팔의 동작과 클럽의 힘을 크게 하기 위한 동작으로 생각된다. 어깨 각속도는 클럽이 stiff할수록 각속도가 큰 감속하는 것으로 나타났다. 손목속도는 regular 클럽의 경우 손목의 감속이 늦게 되고 임팩트에서 손목의 감속이 적게 하는 것으로 나타났으며 stiff와 x-stiff의 클럽에서 임팩트 시에 순간적인 감가속으로 인해 클럽의 속도를 증가시키고 있다. 임팩트 시에 손목의 감가속은 클럽헤드의 임팩트 시 속도를 증가시키는 결과를 보였다. 클럽헤드는 regular 클럽이 임팩트전에는 속도 증가가 커지는 결과와 일치된 결과를 보이고 있다.

사상의학의 4체질 분류에 따른 각 체질별 전신조정술 체형분포 양상과 그에 따른 정적 자세특성 및 동적 운동증감 양상에 관한 실증적 연구 (Sasang Constitution Classification related to an aspect of distribution GCM(General Coordinative Manipulation) Body Type and Experimental Study based on the character of Static Posture and Dynamic Hyper/Hypo-mobility Pattern)

  • 문상은;조현래;오창선;김성현
    • The Journal of Korean Physical Therapy
    • /
    • 제17권4호
    • /
    • pp.505-517
    • /
    • 2005
  • The Purposes of this study were to find complementary connectible new factors that analyzed correlation relate of Sasang Constitution and GCM Body Type in Static Posture and Dynamic Hyper/Hypo-mobility Pattern. Method of this study was asymtomatic volunteers 232(unmarried man and women), conducted from September 1 to December 31. In this main study progressing step diagnosised first, Constitution of Sasang medicine after being classified into four groups of Soyangin, Taeumin, Soeumin, Taeyangin diagnosis of GCM Body Type and progressed that related Static Posture and Dynamic Hyper/Hypo mobility Pattern. The results are as follows. Distribution of Sasang Medicine Constitution proved to be Taeyangin 13, Soyangin 66, Taeumin 67, Soeumin 86 respectively. Distribution of GCM Body Type proved I Body Type 72(31.0%), II Body Type 54(23.3%), III Body Type 89(38.4%), IV Body Type 17(7.3%). The distribution of Sasang Constitution according to GCM Body Type was that; I Body Type was distributed in the order Soeumin 34.7%(25), Taeumin 31.9%(23), Soyangin 30.6%(22), Soeumin 34.7%(25) is the most people. II Body Type was distribution of in the order Soeumin 42.6%(23), Soyangin 5.9%(14), Taeumin 24.1%(13), Soeumin 42.6%(23) is the most people. III Body Type was distribution of in the order Soeumin 37.1%(33), Taeumin 30.3%(27), Soyangin 28.1%(25), Soeumin 37.1% is the most people. IV Body Type proved high distribution each of Soeumin 29.4%(5) and Soyangin 29.4%(5). In case of main left side posture character of spine and limbs about I Body Type 72 persons with left scapular and ilium forward tilted pattern proved in the order high distribution iliac crest thigh and scapular high 70(97.2%), gluteal fold high and scapular abduction 69(95.8%), lumbar scoliosis 65(90.3%). Also, in case of right side posture character proved in the order high distribution deep gluteal fold 69(95.8%), umbilical deviation 68(94.4%). Incase of main left side posture character of spine and limbs about n Body Type 54 persons proved in the: order high distribution knee hyperextension 50(92.6%), shoulder deviation 49(90.7%) etc. Also, in case of right side posture character proved in the order high distribution pelvic deviation 53(98.1%), iliac crest thigh 52(96.3%), hip flexion and ankle inversion 51(94.4%) etc. In case of main left side posture character of spine and limbs about III Body Type 89 persons proved in the order high distribution shoulder deviation 87(97.8%), scapular abduction 86(96.6%), scapular high 85(95.5%) etc. And in case of right side posture character proved in the order high distribution pelvic deviation and iliac crest thigh 86(96.6%) etc. In case of main left side posture character of spine and limbs about IV Body Type 17 persons proved in the order high distribution pelvic deviation, lumbar sciliosis and lumbar lordosis increase 15(88.2%) etc. Also, in case of right side posture character proved in the order high distribution wrist dorsiflexion 16(94.1%), thickened achilles tendon etc.

  • PDF

상지에 발생한 악성 및 침윤성 양성골종양에 대한 사지 구제술 (Limb Salvage in the Treatment of the Upper Extremity Bone Tumors)

  • 한수봉;신규호;김범수
    • 대한골관절종양학회지
    • /
    • 제1권2호
    • /
    • pp.154-163
    • /
    • 1995
  • 1986년 3월부터 1993년 12월까지 연세대학교 의과대학 정형외과학 교실에서 상지에 발생한 악성 및 침윤성 양성 골종양에 대하여 사지구제술을 시행하여 다음과 같은 결과를 얻었다. 1. 총 13명의 상지에 발생한 악성 및 침윤성 양성골종양 환자에 대해 사지 구제술을 시술 하였다. 2. 사지 구제 술의 내용은 8 례가 Tikhoff -Linberg 수술, 2 례가 분절절제 및 재접합술, 2 례가 종양삽입물 치환술 그리고 1 례가 분절절제술 및 유리혈관부착 생비골이식술이었다. 3. 13 례중 3 례가 골육종, 4 례가 연골육종, 3 례가 거대세포종, 1 례가 병적 골절을 동반한 유잉육종, 1 례가 연골아세포종, 1 례가 전완부 건 및 근육과 원위요골 및 척골을 동시에 침범한 평활근 육종이었다. 4. 추시기간은 술수 1년에서부터 7년 5개월로 평균 4년 5개월이었다. 5. 총 13명의 환자 중 1 례의 상완골에 발생한 병적 골절을 동반한 유잉 육종의 환자에서 국소재발 및 다발성 골전이가 나타나 수술 후 4년 4개월만에 사망하였고 나머지 12 례의 환자는 국소재발이나 원격전이의 소견은 없었다. 6. 상지에 발생한 악성 및 침윤성 양성 골종양의 치료로 여러방법의 사지구제술은 병의 치료 면이나 기능적인 면에서 만족스런 결과를 가져왔다.

  • PDF

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

연소성 류마티스 관절염의 임상적 고찰 (Clinical observations of juvenile rheumatoid arthritis)

  • 이주훈;유정민;박영서
    • Clinical and Experimental Pediatrics
    • /
    • 제49권4호
    • /
    • pp.424-430
    • /
    • 2006
  • 목 적 : JRA는 소아에서 가장 흔한 결체 조직 질환 중의 하나이고 장, 단기적인 신체장애를 유발하는 중요한 원인이 된다. 저자들은 JRA 환아들의 질병 양상과 경과를 알아보기 위하여 본 연구를 시행하였다. 방 법 : 1990년 8월부터 2004년 11월까지 서울아산병원 소아과를 내원한 59명의 JRA 환아를 대상으로 하였다. 성별, 연령, 유형, 침범 관절, 관절 외 소견, 검사 및 방사선 소견, 치료, 경과 등에 대하여 후향적으로 고찰하였다. 결 과 : 소수 관절형은 32.2%, 다수 관절형은 30.5%, 전신형은 37.3%였다. 남녀비는 1.7 : 1이었으며 평균 발병 연령은 $9.3{\pm}3.7$(1.3-15.9)세이었다. 가장 흔히 침범된 관절은 무릎과 발목, 팔목이었다. 관절 외 소견을 살펴보면 발열, 발진, 근육통, 림프절 비대 등이 있었다. 검사 소견을 살펴보면 백혈구증가증, 빈혈, 혈소판증가증, ESR 상승, CRP 상승 등의 소견을 보였다. 류마토이드 인자, 항핵항체 양성률은 각각 5.3%, 18.0%이었다. 비스테로이드성 소염제(NSAID)가 가장 많이 투여되었으며, 메토트렉세이트 또는 스테로이드를 함께 투여했던 경우가 27.1%였다. 88.1%의 환아에서 장애 후유증 없이 완치되었으며 한 명의 환아에서만 기능성 상태 IV의 장애가 있었다. 폐침범이 동반되었던 한 명의 환아가 사망하였다. 결 론 : 본 연구에서는 균등한 유형별 분포, 남아에서 호발하는 양상, 늦은 발병 연령, 낮은 홍채모양체염 발병률, 그리고 낮은 ANA 양성률을 보였는데 이러한 소견들은 한국에서의 JRA의 소견이며 서양에서의 보고와는 상이한 결과들이다. JRA가 민족과 지역에 따라서 서로 다른 발병양상을 보인다는 점을 시사한다고 생각된다. 앞으로 더 많은 수의 환자들을 대상으로 하는 다기관 협동 연구 및 역학조사가 필요할 것으로 생각된다.

뇌손상 가족 간병인의 근골격계 자각증상과 관련요인 (The Factors Related to Musculoskeletal Symptoms of Family Care-Givers who Have a Patient with Brain Damage)

  • 전은미;이성아;구정완
    • 한국산학기술학회논문지
    • /
    • 제18권1호
    • /
    • pp.336-344
    • /
    • 2017
  • 본 연구는 뇌손상 진단을 받고 병원에서 재활치료를 실시하고 있는 환자의 가족 간병인 340명을 대상으로 근골격계증상을 알아보고 그 관련요인을 파악하고자 자기 기입식 설문조사를 실시하였다. 설문조사 내용은 일반적 특성, 간병활동 특성, 근골격계 자각 증상이였다. 본 연구의 조사 기간은 2014년 3월부터 4월이며, 재활병원 및 요양병원에서 수집하였다. 연구결과 독립변수에 따른 자각증상 호소율은 신체부위별로 다르게 나타났다. 요인분석의 결과는 목의 경우 초졸의 학력이 영향을 끼쳤고, 어깨의 경우 여자, 나이 50~59세, 학력 중졸, 간병기간 1년 이내와 1년 7개월 이상 2년 이내가 영향을 끼쳤다. 팔/팔꿈치의 경우 나이 40~49세, 학력 대졸, 간병기간 1년 이내와 1년 7개월 이상 2년 이내 변인이 유의한 영향을 끼쳤다. 손/손목/손가락의 경우 나이 50~59세, 간병기간 1년 이내와 1년 7개월 이상 2년 이내 변인이 통증에 유의한 영향을 끼쳤다. 다리/발의 경우 나이 50~59세, 간병기간 6개월 이내 변인이 통증에 유의한 영향을 미치는 것으로 나타났다. 허리의 경우 학력 초졸 중졸 고졸, 간병기간 1년 이내와 1년 7개월 이상 2년 이내, 독립보행 불가능 변인이 통증에 유의한 영향을 미치는 것으로 나타났다. 진단명 별 간병활동 특성에서 근골격계 자각증상 호소율은 통계적으로 유의하지 않았다. 근골격계 자각증상 호소에 가장 영향을 미치는 간병활동 동작으로는 이동하기와 보행이었다. 근골격계 자각증상에 영향을 미치는 전체 요인에 대해서는 간병 기간 1년 이내가 전체 통증에 유의한(p<.05) 영향을 미치는 것으로 나타났다. 본 연구의 결론으로는 뇌손상 환자의 가족 간병인은 환자를 간병하는 간병활동 특성에서 근골격계 질환의 위험에 노출되어 생활하는 것을 알 수 있었다. 또한 뇌손상 환자를 돌보는 가족 간병인의 신체부위별 근골격계 증상에 영향을 미치는 요인이 다르므로 이러한 요인에 대한 체계적이며 종합적인 예방 교육과 연구가 마련되어야 할 것이다.

부정교합 분류에 따른 초경시기와 골성숙도에 관한 연구 (A STUDY ON MENARCHE AND SKELETAL MATURITY AMONG VARIOUS MALOCCLUSION GROUPS)

  • 김경호;백형선;손은수
    • 대한치과교정학회지
    • /
    • 제28권4호
    • /
    • pp.581-589
    • /
    • 1998
  • 부정교합 환자에서 사춘기 성장 가속화시기의 치료는 악안면 골격 부조화의 교정과 안모의 개선에 상당한 영향을 미치므로 사춘기의 성장을 예측하고 성장 잠재력을 평가하는 것은 매우 중요하다. 따라서 교정학에 있어서 개개인의 성장 가속화시기와 연관해서 신체의 성장 발육상태를 평가하는 것은 매우 중요하며 교정치료시 반드시 고려되어야 한다. 이 에 본 연구에서는 부정교합 분류에 따라 초경시기에 차이가 있는지와 초경시 골성숙도를 조사하기 위해, 1급 부정교합자 64명, II급 부정교합자 51명, III급 부정교합자 38명의 초경 전후 3개월 이내의 수완부골 방사선 사진을 이용하여 골성숙도를 평가한 결과 다음과 같은 결론을 얻었다. 1. 초경시 평균 연령은 $12.50{\pm}1.01$세 였다. 2. 각 군별 초경연령은 I급 부정교합군이 $12.36{\pm}1.04$세, II급 부정교합군이 $12.81{\pm}1.03$세, III급 부정교합군이 $12.32{\pm}0.82$세로서, II급 부정교합군이 I급 부정교합군 과 III급 부정교합군에 비해 늦은 초경연령을 보였다. 3. 초경시 수완부 골성숙도는 부정교합에 따른 차이가 없었다. 4. 초경시 수완부 골성숙도는 SMI 7이 $45.10\%$, SMI 8이 $27.45\%$, SMI 9가 $10.46\%$, SMI 6이 $7.84\%$, SMI 10이 $7.84\%$, SMI 5가 $1.31\%$ 였다. 5. 초경연령과 수완부 골성숙도는 통계적으로 유의한 상관관계를 보였다(p<0.05, r=0.25430).

  • PDF