• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.68-74
• /
• 1999

The influence of surface preparation methods after plasma cutting on the quality of weld zone was investigated. For comparison, three types of welded specimens were prepared by machining (WM), plasma cutting with light regrinding (WPG) and without regrinding (WP), by using three kinds of materials, carbon steel (SM45C), stainless steel (STS304) and aluminum alloy (A6061-T6). Nondestructive examination, hardness test, microstructure examination, and fracture toughness test were performed. The results showed that there was no appreciable reduction in hardness or fracture toughness in WP specimens. But a little difference in heat affected zone size was observed.

• Journal of the Korean Wood Science and Technology
• /
• 제34권4호
• /
• pp.15-21
• /
• 2006

본 연구는 목재에 무기물인 규산나트륨과 붕산, 인산을 단독 또는 혼합 침지처리하여 시험편의 중량증가율 및 수축률, 흡습성과 휨강도와 압축강도 및 경도의 기계적 성질을 측정하였다. 또한, $300^{\circ}C{\sim}500^{\circ}C$의 온도에서 시험편을 탄화시킨 후, 중량손실을 측정하여 무기물 처리재의 내열성에 대하여 조사하였다. 1) 물유리 침지 주입 시 중량증가율은 처리온도보다는 농도에 더 큰 영향을 받았으며, 물유리와 붕산 및 인산의 혼합처리가 단독처리에 비해 높은 중량증가율을 나타내었다. 2) 무기물 처리재의 수축율은 물유리처리를 제외하고는 무처리재보다 낮은 수축율 값을 나타내었으며, 흡습성 실험 결과 물유리나 인산이 포함된 경우에 높은 흡습성을 나타내었다. 3) 기계적 성질에 있어 휨강도는 대부분의 무기물처리재가 무처리재보다 낮은 값을 보였으나, 압축강도와 표면경도는 물유리나 붕산이 처리된 시험편의 경우 무처리재와 비슷하거나 보다 높은 값을 나타내었다. 4) 무기물 처리재를 $300^{\circ}C{\sim}500^{\circ}C$에서 탄화시킨 결과, 중량손실율의 약 50~70% 정도를 나타내어 무처리재보다 우수한 내열성을 나타내었다. 특히, $400^{\circ}C$까지의 온도에서는 시험편의 형태가 그대로 유지되었다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1408-1414
• /
• 2015

The renewable energies such as photovoltaic power, wind power and biomass have grown to a greater extent as decarbonization techniques. The renewable energies are interconnected to power systems (or electrical grids) in order to increase benefits from economies of scale, and the extra attention is focused on the Grid Code. A grid code defines technical parameters that power plants must meet to ensure functions of power systems, and the grid code determined by considering power system characteristics is various across the country. Some TSO (Transmission System Operator) and ISO (Independent System Operator) have issued grid code for wind power and the special requirements for offshore wind farm. The main purpose of the above grid code is that wind farm in power systems has to act as the existing power plants. Therefore wind farm developer and wind turbine manufacturer have great difficulty in grasping and meeting grid code requirements. This paper presents the basic understanding for grid codes of developed countries in the wind power and trends of those technical requirements. Moreover, in grid code viewpoint, the active power control of wind power is also discussed in details.

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• Archives of Pharmacal Research
• /
• 제23권5호
• /
• pp.482-487
• /
• 2000

The antitumor activity of Bifidobacterium breve K-110, and K-I11, and B. infantis K-525 was investigated. These Bifidobacterial cells and their cell wail preparations (WPG) significantly increased the survival rate of mice who had been intraperitoneally implanted with sarcoma 180 cells. Solid tumor growth was inhibited even when the sarcoma 180 cells were implanted into the groins of the mice. However, the Bifidobacterial cells did not show in vitro cytotoxicity against tumor cell lines. Cell kinetic studies revealed that these WPGs induced neutrophils, which were followed by macrophages, at the site of peritoneal injection. The WPGs directly activated these cells to inhibit the growth of tumor cells in vitro assays. Our results suggest that Bifidobacterial WPGs induce and activate nonspecific phagocytes in situ to reject growing tumor cells in the mouse peritoneal cavity.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.68-75
• /
• 2023

This paper proposes a three-phase single-stage AC-DC converter for the small wind generation system. Input power factor improvement and insulated output can be implemented with the proposed three-phase single-stage AC-DC converter under the wide power generation voltage (80-260 V_ac) and frequency (10-42 Hz) in a small wind power generation (WPG) system. The proposed converter is also capable of zero-voltage switching in the primary-side switches and zero-current switching in the secondary-side diodes by phase-shift control at a fixed switching frequency. In addition, it is possible to control a wide output voltage (V_o: 39 V_DC-60 V_DC) by varying the link voltage and improving the input power factor (PF) and the total harmonic distortion factor (THD_i). Simulation and experimental results verified the validity of the proposed converter.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.13-19
• /
• 2014

국내의 주 생산 수종인 잣나무 $90{\times}90mm$ 각재의 적정한 열처리 조건을 찾기 위해 3가지 열처리 스케줄을 적용하여 재색과 물성에 미치는 영향을 연구하였다. 1차 열처리시 온도는 $170^{\circ}C$와 $190^{\circ}C$, 시간은 예비가열시간 1시간을 포함하여 9시간과 13시간을 적용하였다. 2차와 3차 열처리는 모든 공시 각재에 동일하게 $190^{\circ}C$-9시간을 적용하였다. 열처리 횟수가 증가할수록 백색도 $L^*$는 직선적으로 감소하였으며 표준편차도 감소하였다. 열처리 횟수가 증가할수록 색차 ${\Delta}E^*$는 직선적으로 증가하였으며, 표준편차가 커지는 경향이 있었다. 알려진 바와 달리 열처리 시편의 평균 종압축강도가 무처리 시편보다 9% 높았다. 항팽윤율과 중량증가율을 측정하여 열처리 시편의 치수안정성이 무처리보다 크게 증가하였음을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제31권5호
• /
• pp.57-64
• /
• 2003

고목재의 치수안정성을 향상시키는 무수초산과 포름알데하이드 기상처리가 팔만대장경 경판의 주요 소재인 산벚나무의 중량, 흡습성, 그리고 재색에 미치는 효과를 야외폭로와 촉진열화시험을 통해 측정하였다. 무수초산과 포름알데하이드 72시간 기상처리에 의한 시편의 중량은 각각 평균 8.1과 15.7% 증가하였다. 두 달 이상 야외 폭로된 아세틸화 시편의 중량은 1.5% 밖에 감소하지 않았으나 포름알데하이드 시편은 매우 많이 감소하였다. 또 아세틸화 처리는 시편의 흡습성을 낮추었으며 자외선에 의한 갈변을 방지하였으나, 포름알데하이드 처리는 그렇지 못하였다. 한편 포름알데하이드 처리시간이 긴 시편일수록 할열과 변형이 더 많이 발생하였다. 따라서 포름알데하이드 처리는 고목재 보존방법으로 맞지 않으나, 아세틸화 기상처리는 액상처리와 같이 중량을 과도하게 증가시키지 않으면서도 자외선과 비로 인한 재색변화와 중량감소를 막아줌으로 고목재의 보존처리에 적합하다고 할 수 있다.

• 자원환경지질
• /
• 제56권3호
• /
• pp.259-275
• /
• 2023

Pan African granitoids of Kaiama is comprised of K-feldspar rich granites, porphyritic granites, and granitic gneiss that are intruded by quartz veins and aplitic veins and dykes which trend NE-SW. In order to establish the geochemical signatures, petrogenesis, and tectonic settings of the lithological units, petrological, petrographical, and geochemical studies was carried out. Petrographic analysis reveals that the granitoids are dominantly composed of quartz, plagioclase feldspar, biotite, and k-feldspar with occasional muscovites, sericite, and opaque minerals that constitute very low proportion. Major, trace, and rare earth elements geochemical data reveal that the rocks have moderate to high silica (SiO₂=63-79.7%) and alumina (Al₂O₃=11.85-16.15) contents that correlate with the abundance of quartz, feldspars, and biotite. The rocks are calc-alkaline, peraluminous (ASI=1.0-<1.2), and S-type granitoids sourced by melting of pre-existing metasedimentary or sedimentary rocks containing Al, Na, and K oxides. They plot dominantly in the WPG and VAG fields suggesting emplacement in a post-collisional tectonic setting. On a multi-element variation diagram, the granitoids show depletion in Ba, K, P, Rb, and Ti while enrichment was observed for Th, U, Nd, Pb and Sm. Their rare-earth elements pattern is characterized by moderate fractionation ((La/Yb)_N=0.52-38.24) and pronounced negative Eu-anomaly (Eu/Eu^*=0.02-1.22) that points to the preservation of plagioclase from the source magma. Generally, the geochemical features of the granitoids show that they were derived by the partial melting of crustal rocks with some input from greywacke and pelitic materials in a typical post-collisional tectonic setting.

• Journal of the Korean Wood Science and Technology
• /
• 제33권6호통권134호
• /
• pp.63-70
• /
• 2005

$225^{\circ}C$에서 $325^{\circ}C$ 이하의 저온에서 열처리한 셀룰로오스의 물성과 에틸아민 흡착특성을 열처리온도별로 조사하였다. 열처리온도의 증가와 더불어 수율이 감소하고, 탄소함량이 증가하는 반면, 수소나 산소의 함량은 감소하였다. 표면관능기량을 Boehm 법으로 측정한 결과, 열처리온도가 $300^{\circ}C$까지 올라가면 산성관능기량이 증가하였으나 그 이상의 온도에서는 다소 감소하는 경향이 있었다. 염기성관능기는 거의 존재하지 않았으며 열처리온도 $325^{\circ}C$에서 미량 확인할 수 있을 정도였다. 열처리셀룰로오스를 1점법으로 측정한 비표면적은 처리온도가 높으면 다소 증가하는 경향이 있었으나 매우 적었다. 열처리 온도가 증가할수록 셀룰로오스의 에틸아민증기 흡착량이 증가하여 $300^{\circ}C$ 처리 셀룰로오스의 에틸아민흡착에 의한 중량증가가 최대 113%를 나타내었다. $275^{\circ}C$에서 열처리셀룰로오스는 에틸아민 흡착 시, 팽윤이 일어나고 용해현상이 일어났다. $275^{\circ}C$ 이상의 온도에서 열처리한 셀룰로오스는 X선회절도 상에서 무정형화 하는 것으로 나타났다. 에틸아민 흡착한 열처리셀룰로오스의 용해 현상은 셀룰로오스의 결정구조 붕괴와 염기성 가스의 흡착량 증가에 의한 것으로 추측된다.