• 한국분말재료학회지
• /
• 제26권1호
• /
• pp.40-44
• /
• 2019

Tungsten trioxide ($WO_3$) is a promising candidate as a photocatalyst because of its outstanding electrical and optical properties. In this study, we prepare $WO_3$ thin films by electrodeposition and characterize the photocatalytic degradation of methylene blue using these films. Depending on the voltage conditions (static and pulse), compact and porous $WO_3$ films are fabricated on a transparent ITO/glass substrate. The morphology and crystal structure of electrodeposited $WO_3$ thin films are investigated by scanning electron microscopy, atomic force microscopy, and X-ray diffraction. An application of static voltage during electrodeposition yields a compact layer of $WO_3$, whereas a highly porous morphology with nanoflakes is produced by a pulse voltage process. Compared to the compact film, the porous $WO_3$ thin film shows better photocatalytic activities. Furthermore, a much higher reaction rate of degradation of methylene blue can be achieved after post-annealing of $WO_3$ thin films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.9-13
• /
• 1995

The effect of WO$_3$ addition and sintering condition on the electrical properties of SrTiO$_3$ceramic have been investigated. Resistivity and capacitance of grains and grain boundaries were obtained by applying impedance spectroscopy. From the result it could be concluded that the temperature dependance of capacitance of WO$_3$doped specimens were influenced directly by the variation of grain boundary capacitance. It was also found that the dispersion frequency increased as the degree of reduction of the specimen increased. The dispersion frequency characteristics showed discernably that the resistivity of the specimen varied with WO$_3$ content. The dielectric properties were influenced directly by the reduction of the specimens. The dielectric constant of grain boundaries of BL capacitor could be obtained by Cole-Cole plot and was influeneced by the amount of WO$_3$ added.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.61-62
• /
• 2006

In this study, in order to develop the low temperature sintering ceramics for multilayer piezoelectric actuator, PMN-PNN-PZT ceramics using ${Fe_2}{O_3}$ and $WO_3$ as sintering aids were manufactured with the amount of $WO_3$ addition, and the specimens were sintered at 900, 930, $960^{\circ}C$, respectively. Thereafter, their dielectric and piezoelectric properties were investigated. The sintering aids were proved to lower the sintering temperature of piezoelectric ceramics due to the effects of ${Fe_2}{O_3}$ and $WO_3$ liquid phase. At 0.3wt% $WO_3$ added specimen sintered at $930^{\circ}C$, kp, Qm, dielectric constant and $d_{33}$ showed the optimum values of 0.60, 1402, 1440 and 360[pC/N], respectively, for multilayer piezoelectric actuator application.

• 한국재료학회지
• /
• 제3권6호
• /
• pp.632-637
• /
• 1993

3000$\AA$~6000$\AA$의 두께로 진공 증착한 $WO_3$ 박막의 광특성 및 일렉트로크로미즘에 대하여 연구하였다. 증착된 $WO_3$ 박막은 모두 무색 투명 하였으며 X-선회절 분석결과 비정질 상태로 밝혀졌으며, 비정질 $WO_3$ 박막의 굴절율은 가시광선 영격에서 1.9-2.1로, 광에너지 gap은 3.25eV로 나타났다. ITO투명전극/$WO_3$박막/$LiCIO_4$ ~propylene carbonate/백금 대향전극 구조를 갖는 일렉트로크로믹소자를 구성하여 일렉트로크로믹 특성을 조사하였다. $WO_3$ 박막의 coloration/과 bleaching현상은 $LiCIO_{4}$~propylene carbonate유기전해질과 ITO투명전극으로 부터 $Li^{+}$이온과 전자의 이중주입에 의하여 청색으로 나타났으며, 가역적으로 전기 화학적인 산화반응에 의하여 bleaching현상이 일어났다. Coloration과 bleaching현상, 광학밀도, 구동전압 및 응답속도 등의 일렉트로크로믹 특성은 $WO_3$ 박막의 증착조건, 전해액 농도, 투명전극의 sheet resistance 인가전압에 크게 의존하는 것으로 밝혀졌다.

• 한국결정성장학회지
• /
• 제17권4호
• /
• pp.139-144
• /
• 2007

2자리 리간드를 사용하여 $BaWO_4$ 결정을 합성하였다. 리간드의 농도와 $[{WO_4}^{2-}]/[Ba^{2+}]$ 비율과 같은 반응 변수는 다양한 형태의 $BaWO_4$ 결정을 형성하는데 매우 중요한 역할을 한다. TMEDA를 리간드로 사용했을 때는 250nm의 폭과 $2{\sim}3{\mu}m$의 길이를 가진 십자형의 단면들의 자기 조립에 의해서 $15{\sim}20{\mu}m$ 길이의 마이크로 막대형의 $BaWO_4$ 결정을 얻었다.

• 한국분말재료학회지
• /
• 제13권3호
• /
• pp.205-210
• /
• 2006

The effect of Cu content on hydrogen reduction behavior of ball-milled $WO_3$-CuO nanocomposite powders was investigated. Hydrogen reduction behavior and reduction percent(${\alpha}$) of nanopowders were characterized by thermogravimetry (TG) and hygrometry measurements. Activation energy for hydrogen reduction of $WO_3$ nanopowders with different Cu content was calculated at each heating rate and reduction percent(${\alpha}$). The activation energy for reduction of $WO_3$ obtained in this study existed in the ranging from 129 to 139 kJ/mol, which was in accordance with the activation energy for $WO_3$ powder reduction of conventional micron-sized.

• 한국분말재료학회지
• /
• 제10권3호
• /
• pp.186-189
• /
• 2003

A chemical vapor condensation (CVC) process using the pyrolysis of metal-organic precursors was applied to produce the nanosized $WO_3$ powders. Morphology and phase changes of the synthesized $WO_3$ powder as a function of CVC parameters were investigated by XRD, BET and TEM. The agglomerated nanosized monoclinic $WO_3$ powders with nearly spherical shape and 10-38 nm in mean diameter could be obtained. Conditions to produce the $WO_3$ nanopowders are presented in this paper.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1794-1798
• /
• 2014

Graphitic g-$C_3N_4-WO_3$ composite was synthesized simply by decomposing melamine in the presence of $WO_3$ at $500^{\circ}C$. The obtained material was characterized by XRD, SEM, IR and XPS. The results showed that the as-prepared composite exhibits orthorhombic $WO_3$ phase coated by g-$C_3N_4$ and the g-$C_3N_4$ decomposed completely with N-doped $WO_3$ remaining at elevated calcination temperatures. The photocatalytic activity of the composite was evaluated by the photodegradation of methylene blue under visible light. An enhancement in photocatalytic activity for the graphitic g-$C_3N_4-WO_3$ composite compared to the conventional nitrogen-doped $WO_3$ was observed, which can be attributed to the presence of g-$C_3N_4$ in the material.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1369-1376
• /
• 1995

The WO3 thin-film NOx sensor which is of practical use and includes the heater and the temperature sensor was fabricated. The WO3 thin films as a gas-sensing layer was deposited at ambient temperature in a high-vacuum resistance heated evaporator. The highest sensitivity of the WO3 thin-film sensor to NOx was obtained under the condition of the annealing temperature of 50$0^{\circ}C$ and the operating temperature of 30$0^{\circ}C$. The gas sensing characteristics of this sensor was excellent, i.e. high sensitivity (Rgas/Rair in 3 ppm NO2=53) and fast response time (4 seconds).

• 공업화학
• /
• 제10권2호
• /
• pp.247-251
• /
• 1999

분말 $Zr(OH)_4$를 ammonium metatungstate수용액에 넣어서 증발 건조시킨 후 공기중 높은 온도에서 소성하여 zirconia에 담지된 $WO_3$촉매를 제조하였다. $ZrO_2$에 소량 (1 wt %)의 $WO_3$를 첨가하면 촉매의 산의 양과 세기가 급격하게 증가하였으며 촉매는 Lewis산과 $Br{\ddot{o}}nsted$산 모두를 가지고 있었다. 이와 같은 $WO_3$/$ZrO_2$촉매의 큰 산의 세기와 많은 산의 양은 $WO_3$와 $ZrO_2$의 상호작용으로 생성된 W=O결합의 성질에 기인하였다. 2-propanol의 탈수반응에서는 $WO_3$함량이 20 wt %이고 973 K에 소성한 촉매가 최대의 촉매활성을 보였으며 cumene의 탈알킬화 반응에서는 $WO_3$함량이 15 wt %이고 1023 K에서 소성한 촉매가 최대 촉매활성을 나타내었다. 2-propanol의 탈수반응에서 촉매활성의 변화는 대략적으로 촉매의 산의 양의 변화와 상호 관련되었다.