• ETRI Journal
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2001

The performance of a long wavelength-band erbium-doped fiber amplifier (L-band EDFA) using 1530nm-band pumping has been studied. A 1530nm-band pump source is built using a tunable light source and two C-band EDFAs in cascaded configuration, which is able to deliver a maximum output power of 23dBm. Gain coefficient and noise figure (NF) of the L-band EDFA are measured for pump wavelengths between 1530nm and 1560nm. The gain coefficient with a 1545nm pump is more than twice as large as with a 1480nm pump. It indicates that the L-band EDFA consumes low power. The noise figure of 1530nm pump is 6.36dB at worst, which is 0.75dB higher than that of 1480nm pumped EDFA. The optimum pump wavelength range to obtain high gain and low NF in the 1530nm band appears to be between 1530nm and 1540nm. Gain spectra as a function of a pump wavelength have bandwidth of more than 10nm so that a broadband pump source can be used as 1530nm-band pump. The L-band EDFA is also tested for WDM signals. Flat Gain bandwidth is 32nm from 1571.5 to 1603.5nm within 1dB excursion at input signal of -10dBm/ch. These results demonstrate that 1530nm-band pump can be used as a new efficient pump source for L-band EDFAs.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.674-681
• /
• 2000

We proposed polymer based vertical asymmetric optical coupler. And we optimized the proposed device by coupling characteristic analysis In 1.33um wavelength, TE mode, we obtained very short coupling length(L=277.6um), high coupling efficiency(94%). The merits of proposed device are low propagation loss due to very short full device, low production cost and time, and high integrated fabrication. We will use this to fabricate optical switch, modulator and tunable WDM devices, etc.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.770-777
• /
• 2009

We have developed a fully functional reconfigurable optical add-drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10-channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40-channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C-band 40-channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40-channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.90-99
• /
• 2007

We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.547-555
• /
• 2006

We implemented DPU(Double-Pass Gain-Clamped) L-band EDFA for highly efficient amplification. A lasing signal generated within the linear cavity, can minimize the fluctuation of surviving channels when several WDM(Wavelength Division Multiplexing) channels are added or dropped. The new method measuring the characteristics of transient response of surviving channels quantitatively is suggested. It is to measure the ratio of lasing output before add or drop to that after add or drop. We investigated dynamic characteristics by using this method according to lasing wavelengths and propagation directions within the cavity. Experimental measurements show that the short lasing wavelength and backward propagation direction is the best condition for small fluctuation of surviving channels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5288-5293
• /
• 2014

This paper presents the characterization of the wavelength selective switch using a LCOS display instead of a MEMS device, which is a core technology for the next generation ROADM. We constructed a five-port WSS, and examined the basic characteristics of the WSS, such as the response time, beam steering, insertion loss, and channel isolation. The response time of WSS was 11.6 mS and the beam steering characteristics of LCOS was well performed. The measured insertion loss at 40 channels in the c-band were 5.5~12.7 dB and channel isolation was 16~18 dB. Although the characteristics of LCOS-based WSS are inferior to the conventional MEMS-based WSS, it can be improved by additional experiments that secure the technology competitiveness.

• Journal of KIISE:Information Networking
• /
• v.34 no.6
• /
• pp.525-532
• /
• 2007

Recently, broadband access networks have been competitively deployed all over the world with the development of various multimedia services for such a network. ETRI(Electronics and Telecommunications Research Institute) built the FTTH(Fiber-to-the-Home) service center to develop a next-generation equipment and a high-quality service/platform as well as to promote domestic industry in the field of optical communication. The FTTH service center has a variety of test equipments such as FTTH standard testbed for a BMT(Bench Mark Test), a network operation center, and IPTV service equipments. Also, ETRI deployed a new type of commercial optical access networks cooperating with ISP(Internet service provider). In this paper, we analyzed the quality degradation appeared in QoE(Quality of Experience), when IP data broadcasted from the FTTH service center is transmitted to subscribers through the commercial optical access network. Moreover, we proposed a noble solution to address this problem.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.52-60
• /
• 1999

Fabricability of phase shifted grating filters has been theoretically studied by an effective index transfer matrix method. In the optical band-pass filter with multiple ${\lambda}/4$ phase-shifts, the phase-shift error and random variation of the grating period should be suppressed such that corresponding resonance frequency lies within, the filter pass-band. The tolerance for the relative error is less than $10^3$, and is quite stringent in typical filters for WDM application. End facet reflection produces ripple in the transmission spectra and the reflectivity should be less than 1% in order to keep the ripple less than 0.25dB. Also, the effect of waveguide absorption loss is enhanced by the resonance in the filter, and the absorption should be limited to 1dB/cm for the signal loss of less than 0.2dB.

• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.67-83
• /
• 2016

In order to improve the prediction of the regional air quality modeling in the Seoul metropolitan area, a sensitivity analysis using two PBL and microphysics (MP) options of the WRF model was performed during four seasons. The results from four sets of the simulation experiments (EXPs) showed that meteorological variables (especially wind field) were highly sensitive to the choice of PBL options (YSU or MYJ) and no significant differences were found depending on MP options (WDM6 or Morrison) regardless of specific time periods, i.e. day and night, during four seasons. Consequently, the EXPs being composed of YSU PBL option were identified to produce better results for meteorological elements (especially wind field) regardless of seasons. On the other hand, the accuracy of all simulations for summer and winter was somewhat lower than those for spring and autumn and the effect according to physics options was highly volatile by geographical characteristics of the observation site.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.269-279
• /
• 2004

A new online multi-layer integrated routing (MLIR) scheme that combines IP (electrical) layer routing with WDM (optical) layer routing is investigated. It is a highly efficient and cost-effective routing scheme viable for the next generation integrated optical Internet. A new simplified weighted graph model for the integrated optical Internet consisted of optical routers with multi-granularity optical-electrical hybrid switching capability is firstly proposed. Then, based on the proposed graph model, we develop an online integrated routing scheme called differentiated weighted fair algorithm (DWFA) employing adaptive admission control (routing) strategies with the motivation of service/bandwidth differentiation, which can jointly solve multi-layer routing problem by simply applying the minimal weighted path computation algorithm. The major objective of DWFA is fourfold: 1) Quality of service (QoS) routing for traffic requests with various priorities; 2) blocking fairness for traffic requests with various bandwidth granularities; 3) adaptive routing according to the policy parameters from service provider; 4) lower computational complexity. Simulation results show that DWFA performs better than traditional overlay routing schemes such as optical-first-routing (OFR) and electrical-first-routing (EFR), in terms of traffic blocking ratio, traffic blocking fairness, average traffic logical hop counts, and global network resource utilization. It has been proved that the DWFA is a simple, comprehensive, and practical scheme of integrated routing in optical Internet for service providers.