• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.36-45
• /
• 2010

This paper shows a multiplexing technique to maximize the application of a moire-fringe based fiber optic sensor to lots of structure. Especially, a novel fringe-based fiber optic sensor was proposed to overcome the difficulty of multiplexing of a previous moire-fringe-based fiber optic sensor. The novel fringe-based fiber optic sensor is composed of a single reflective fringe and two optical fibers. Therefore, the multiplexing is easily realized because of the simplicity of optic structure inside the sensor. This paper also proposed four models of the multiplexing techniques. The models are based on a wavelength division multiplexing(WDM) technique and a time division multiplexing(TDM) one. Basically, the models would be profitable for a general extrinsic fiber optic sensor such as the fringe-based fiber optic sensor. Finally, the real optic system was manufactured by using the proposed model and successfully examined to prove the feasibility of the model for the application.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.31-38
• /
• 2000

We propose a new photorefractive demultiplexer(DMUX) which can select the 16 channel signal in WDM optical communication system using the wavelength selectivity and the demultiplexing property through multiple recording of holographic volume grating in photorefractive Fe-LiNbO$_{3}$ crystal. For the multiple writing of the 16 channels having uniform diffraction efficiency, the rotation multiplexing technique and the exposure time schedule are used. Designed DMUX has the 16 channels with 0.5nm spacing between 670nm and 677.5nm and the bandwidth of 0.16nm. From the experimental results, the diffraction efficiency of each channel is 8.3 $\pm$0.62%, the optical loss from fresnel reflection and absorption on the crystal is 0.4cm-1, the 3㏈ bandwidth is 0.16 $\pm$0.005nm and the channel spacing is 0.46~0.5nm.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.465-470
• /
• 2020

Complex materials are widely used in aviation industries where lightweighting is essential because they have lighter properties than metals. However, composite materials can cause defects such as internal void formation, poor adhesive mixing, and non-adhesive parts during the production process, and there is a risk of micro-cracking and interlayer separation due to low energy impact. Therefore, a structural damage test is essential. As a result, structural integrity monitoring using FBG is drawing attention. Compared to conventional electrical sensors, FBG has the advantage of being more corrosion-resistant and multiplexed without being affected by electrical noise. However, interloggers measuring FBG are expensive and have a large disadvantage because they are made on the premise of measuring large structures. In this paper, low-cost interloggers were designed for use in unmanned or small aircraft using optical switche, WDM filter, and LTFs, and compared to conventional high-priced interrogator.

• Publications of The Korean Astronomical Society
• /
• v.19 no.1
• /
• pp.101-107
• /
• 2004

This paper describes the digital back-end system for getting the data to analyze the user observation mode by digitalize the analog data after receiving the space radio using the radio telescope, The received analog data will be digitalized by high-speed sampler with 1 Gsps for 4 channel frequency band of millimeter wave, and the digital data will be transported through the fiber-optic digital transmission system and WDM(wavelength division multiplex) to observation building, The wideband digital FIR(Finite Impulse Response) filters analyze the data for user observation mode to record the data in high-speed recorder with 1 Gbps. In this paper, we introduce the overall system configuration and features combined by various information and communication technology in radio astronomy briefly, which will be adopted by KVN(Korean VLBI Network).

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1684-1688
• /
• 2003

In this paper, position and speed control algorithm of LSM (Linear Stepping Motor) using general-purpose PCI I/O board is discussed. The main purpose of this paper is to show that LSM controller can be established on the non real time operating system such as Microsoft Win2000 under the assumption that thread priority strategy is well designed. We can guarantee sampling interval less than 5msec based on the Pentium III microprocessor. Therefore this kind of LSM controller development environment makes shorten the prior research period needed to verify the validness of the proposed control strategy. We also introduce the tool of the real-time windows target system of matlab, which also makes shorten the prior research period. The main focus of this paper is on developing general purpose NT device driver which can drive the general purpose PCI board and applying it for implementing the hardware interface for 2- axis linear stepping motor control. From the experimental results show that the developed LSM controller guarantee 2 micrometer resolution in position control with 10cm/sec moving speed

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.761-765
• /
• 2008

This study presents an effective methodology on integrated monitoring system for a maglev guideway using WDM-based FBG sensors. The measuring quantities include both local and global quantities of the guideway response, such as stains, curvatures, and vertical deflections. The strains are directly measured from multiplexed FBG sensors at various locations of the test bridge followed by curvature calculations based on the plane section assumption. Vertical deflections are then estimated using the Bernoulli beam theory and regression analysis. Frequency contents obtained from the proposed method are compared with those from a conventional accelerometer. Verification tests were conducted on the newly-developed Korean Maglev test track. It has been shown that good agreement between the measured deflection and the estimated deflection is achieved. The difference between the two peak displacements was only 3.5% in maximum and the correlations between data from two sensing systems are overall very good. This confirms that the proposed technique is capable of tracing the dynamic behavior of the maglev guideway with an acceptable accuracy. Furthermore, it is expected that the proposed scheme provides an effective tool for monitoring the behavior of the maglev guideway structures without electro magnetic interference.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.90-99
• /
• 2007

We demonstrate an 80km-reach 64-channel DWDM-PON based on wavelength-locked F-P LDs by changing the position of the C-band BLS for upstream channels from the CO to the RN. It mitigates the necessity of the high power C-band BLS and its handling problems. It also reduces back scattering induced penalty. We obtained less than $10^{-6}$ PLRs in all 128channels through 80km SMF. We also demonstrate a 240km-reach DWDM-PON based on wavelength-locked F-P LDs by adding a bidirectional erbium-doped fiber amplifier(EDFA). We show packet-loss-free transmission in all 128channels at 125 Mb/s per channel over 240km SMF We report the detuning effect of arrayed waveguide gratings(AWGs) and crosstalk effect in the implemented system. We Propose an architecture of a next generation defense wire communication system with the demonstrated long-reach DWDM-PON.

• Korean Journal of Optics and Photonics
• /
• v.23 no.6
• /
• pp.246-250
• /
• 2012

We derive analytical expressions for the output spectral density and the noise power $P_{\beta}$ in noise loading analysis using Volterra kernels to characterize fiber nonlinearities. The bandwidth of the input noise source has little effect on $P_{\beta}$, but the power of the input noise source and the dispersion parameter value of the fiber have a significant effect on $P_{\beta}$. The Volterra method predicts ${\Delta}P_{\beta}[dB]$ = 30 dB/decade, which agrees very accurately over a wide range of fiber parameters compared with the numerical results by the split-step Fourier method. Therefore the Volterra method could be useful to predict the performance of a dense WDM system when we plan to upgrade fiber or increase signal power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.434-439
• /
• 2002

본 연구는 파장 분할 다중화(WDM：Wavelength Division Multiplexing) 방식 전송 시스템 (Transmission System)에 사용되는 어븀 첨가 광섬유 증폭기(EDFA : Erbium-Doped Fiber Amplifier)의 이득 제어(Gain Control) 방법에 관한 것으로 어븀 첨가 광섬유에서 상호 이득 포화(Cross Gain Saturation) 현상, 이득 비동질 (Gain In-homogeneity) 특성, 그리고 어븀 이온의 밀도 반전(Population Inversion)의 변화 에 의해 출력되는 다 파장 광 신호들의 광 세기가 각기 다르게 출력되는 현상을 고출력을 내도록 구성된 어븀 첨가 광섬유 증폭기와 고속 제어기를 구성하여 위 현상들을 억제하며 이득을 제어하기 위한 레이저 다이오드(Laser Diode : LD)의 제어전압 조사하고, 얻어진 결과들을 토대로 이득 제어에 적합한 방법을 제시하고 제어기를 설계한다.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.205-211
• /
• 2017

Combining dispersion-managed optical links with midway optical phase conjugation (OPC) is a possible method of compensating for optical signal distortion due to group velocity dispersion and nonlinear Kerr effects. Although an improvement in the performance of these optical links has been reported, the fixed residual dispersion per span (RDPS) that is typically used restricts the flexibility of link configurations. Thus, in this paper, a flexible dispersion-managed link configuration, comprising artificial distributions of linearly/nonlinearly incremented RDPS, is proposed. Simulations show that a descending distribution of RDPS before the midway OPC, and an ascending distribution of RDPS after the midway OPC, gives the best artificial distribution pattern as the number of fiber spans is increased, regardless of the RDPS incrementation method.