• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.373-374
• /
• 2010

This study is to search for recycling method of the WCP(waste concrete powder). From the experiment analysis on the chemical composition, we confirmed that $SiO_2$ was occupied about 60% of WCP. To investigate the applicability of WCP as replacement material of Quartz, we tested the properties of autoclaved light weight concrete containing WCP. As a results, when increasing the replacement of WCP, compressive strength decreased and pore diameter did not change. On the other hand, when increasing curing times, compressive strength and pore diameter increased.

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.779-784
• /
• 2003

Nickel powders were obtained by various preparation methods, and their sintering characteristics were investigated. Nickel powders made by wet chemical process (WCP) had a higher surface area and more narrow size distribution than that of chemical vapor deposition (CVD) method. Nickel-oxide powders by the WCP method were prepared at $200^{\circ}C$ for 3 hr. The oxidation behaviour of nickel-oxide powder is similar with that of the CVD method. Nickel powders made by the WCP method showed a higher shrinkage in the range of $600^{\circ}C$∼$900^{\circ}C$ than that of commercial powder made by the CVD method. The similar results were observed on the surface microstructure of sintered bodies by SEM measurements.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.49-50
• /
• 2015

Recently, by-products from concrete industry are generated in large quantities because of urban redevelopment. Accordingly, waste concrete powder(WCP) inevitably generated in the course of crushing, screening, and separating the waste concrete also show high emission and be increasing gradually, but which is mostly buried with waste concrete aggregate. This is a basic research to increase the value added utilization rate of WCP. We have examined strength characteristic of extruding panel with WCP, depending on the curing methods. The result of study shows similar strength to the base specimen in autoclave curing condition. And in autoclave curing condition, the specimen with WCP of 20% and 30% satisfy the target strength of 14MPa.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.140-145
• /
• 2012

The purpose of this study is to understand the change of impression by comparing the uniformity lighting with the compound lighting. In previous study, we proposed a light controlling method to harmonize daylight from a window and artificial lights from a ceiling and obtained the results to support our method. We referred this method as the Adjusted Compound-Lighting Model (AC Model). The model claims that lighting in a room with a side-window are perceived as harmonious when the overall light distribution in the room is well approximated by a compound of lights from the window and the entire ceiling. The experiment is carried out with the scaled-models and mock-up spaces that were supposed to be an office space. One is lit by the uniform lighting and the other by the compound lighting in each experimental space. In order to present varying illuminance distributions, thetwo variables were used in this study. One was the ratio of thelight from the window and ceiling in the standard and evaluation box. The standard box was provided by the ratio of 20% to 40% from the window and 80% to 60% from the ceiling as two lighting ratio patterns [Wu20(=Cu80) and Wu40(=Cu60)]. And the evaluation box was provided by the light ratio of 0% to 40 from the window and 100% to 60% from the ceiling [Wcp0(=Ccp100), Wcp20(=Ccp80) and Wcp40(=Ccp60)]. The other variable was themean illuminance level in both boxes. Two level of mean illuminance (700lx and 300lx) were used in this experiment. Each lighting condition was established at equal horizontal mean illuminance level, held constant near 700lx or 300lx in both boxes. Both of them were similar in the shape of distribution when there were same ratios of lights from the window and the ceiling. Subjects were asked to evaluate the point of difference by semantic differential rating on their overall impression after comparing with two rooms. The results showed that the impressions of compound lighting were more positive score than that of uniformity lighting on the items of 'dim-bright', 'dislike-like', 'artificial-natural' and 'closed-open', and that there was no significant difference in impressions between two spaces on other items.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.7
• /
• pp.1079-1082
• /
• 2007

Chromosome microdissection and the reverse FISH technique is one of the most useful methods for the identification of structurally abnormal chromosomes. In particular, the laser microbeam microdissection (LMM) method allows rapid isolation of a target chromosome or a specific region of chromosomes without damage of genetic materials and contamination. Isolated chromosomes were directly amplified by the degenerate oligonucleotide-primed polymerase chain reaction (DOP-PCR), and then the FISH probes labeled with spectrum green- or spectrum red-dUTP were generated by nick-translation. Whole chromosome painting (WCP) probes were successfully generated from only 5 copies of the chromosome. With this method, we produced 24 WCP probes for each human chromosome. We also tried to characterize a marker chromosome, which seemed to be originated from chromosome 11 on conventional banding technique. The marker chromosomes were isolated by the LMM method and analyzed by reverse FISH. We elucidated that the marker chromosome was originated from the short arm of chromosome 5 ($5p11{\to}pter$). A fully automated and computer-controlled LMM method is a very simple laboratory procedure, and enables rapid and precise characterization of various chromosome abnormalities.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.2
• /
• pp.73-84
• /
• 1992

This paper studies noise subtraction methods and distance measures for speech recognition in a noisy environment, and investigates noise robustness of the distance measures applied to the problem of isolated word recognition in white Gaussian and colored noise (vehicle noise) environments. Noise subtraction methods which can be used as a pre-processor for the speech recognition system, such as the spectral subtraction method, autocorrelation subtraction method, adaptive noise cancellation and acoustic beamforming are studied, and distance measures such and Log Likelihood Ratio ($d_{LLR}$), cepstral distance measure ($d_{CEP}$), weighted cepstral distance measure ($d_{WCEP}$), spectral slope distance measure ($d_{RPS}$) and cepstral projection distance measure ($d_{CP},\;d_{BCP},\;d_{WCP},\;d_{BWCP}$) are also investigated. Testing of the distance measures for speaker-dependent isolated word recognition in a noisy environment indicate that $d_{RPS}\;and\;d_{WCEP}$ which weigh higher order cepstral coefficients more heavily give considerable performance improvement over $d_{CEP}and\;d_{LLR}$. In addition, when no pre-emphasis is performed, the recognizer can maintain higher performance under high noise conditions.

• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.15-20
• /
• 2012

In this paper, to solve a vested interests of old papers in scientific literature ranking, we propose novel method that considers not only the current citations from other published papers but also the latent citations of papers to be published in the future. Furthermore, the method also considers the relevance of contents in the citing and cited papers. Finally, we verify the superiority of our proposed method through extensive experiments.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.667-677
• /
• 2020

Crop water stress can be detected based on soil moisture content, crop physiological characteristics and remote-sensing technology. The detection of crop water stress is an important issue for the accurate assessment of yield decline. The crop water stress index (CWSI) has been introduced based on the difference between leaf and air temperature. In this paper, drone-based thermal infrared image was used to map of crop water stress in water control plot (WCP) and water deficit plot (WDP) over spring chinese cabbage fields. The spatial distribution map of CWSI was in strong agreement with the abnormal growth response factors (plant height, plant diameter, and measured value by chlorophyll meter). From these results, CWSI can be used as a good method for evaluation of crop abnormal growth monitoring.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.256-260
• /
• 2003

The paper is aiming at presenting the proper treatment method and procedures of ILW waste to both waste generators and acceptor so that the waste characteristics are satisfied with the WAC(Waste Acceptance Criteria) and as a result, the disposal facility would be operating safely. The ILW generators are responsible for reducing the volume of waste, treating and packaging the waste in order to meet the WAC, and acceptor has an obligation of inspecting the waste in conformity with the acceptance procedure established by regulation. Recently, a number of countries including France and USA examine the disposal acceptability of ILW waste by the WCP(Waste Package Quality Certification Program).