• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.21-30
• /
• 2004

The capacity of WCDMA TDD system is limited mainly by the interference. So, to achieve the expected performance of WCDMA TDD system and to minimize the interference to cdma2000 system interferences, such as interference within WCDMA TDD system inter-cell interference, and interferences between cdma2000 systems, should be considered carefully. In this paper, by using System-level Simulation, we analyzed the interferences between WCDMA TDD system and cdma2000 system in practical situation based on the exact parameters of 3GPP TR 25.942 and by using System-level Simulation considering Link-level we analyze the interferences between WCDMA TDD system and cdam2000 system. From Simulation Results, we propose the condition for optimizing system capacity considering the interferences between WCDMA TDD system ＆ cdam2000 system

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.266-273
• /
• 2007

In this paper presents the WCDMA(Wideband Code Division Multiple Access) system using the rake receiver over multipath fading and wireless mobile communication environments. The interference between the propagation paths in a multipath fading causes a serious degradation in the wireless mobile communication environments. In order to derive the path interference and reduce the fading effect the rake receiver is used. As a result, the WCDMA system using the rake receiver gives a better performance than the convention WCDMA system over a multipath fading and wireless mobile communication environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.588-599
• /
• 2007

This paper presents the coexistence issues between M-WiMAX TDD and WCDMA FDD systems. To improve the M-WiMAX system performance and to reduce the adjacent channel interference to WCDMA FDD system, transmit and receive beamforming techniques are applied in the base stations of M-WiMAX system. Furthermore, we propose an adjacent channel interference modeling methodology, which captures the effect of transmit beamforming on the adjacent channel interference. Besides, we verify the performance improvement in the uplink of WCDMA system due to the transmit beamforming in M-WiMAX downlink based on the proposed adjacent channel interference modeling methodology. We also verify the performance enhancement due to the receive beamforming in the uplink of M-WiMAX system through system level Monte Carlo simulations, considering random user position, the effect of shadowing and multi-path fading channel. Discussions on the gain of applying transmit and receive beamforming in M-WiMAX system comparing the case of SISO system are also included. Furthermore, we present the performance of cosited M-WiMAX and WCDMA systems, considering commercial deployment, additional channel filter at base stations and the effects of TxBF and RxBF.

• Korean Management Science Review
• /
• v.26 no.3
• /
• pp.23-35
• /
• 2009

This study deals with the location management in WCDMA (Wideband Code Division Multiple Access) networks. The new location management method is the one of the many techniques used to provide the packet switched (PS) services effectively in WCDMA networks. WCDMA introduces RA (routing area) for the PS services in addition to LA (location area) for the circuit switched (CS) services. WCDMA system also adopts the cooperative paging and the combined area update which are to decrease signaling traffic using the PS network resources for the CS services. Considering the characteristics of the WCDMA networks, this study formulate into the mathematical programming problem for the location management. Rather than the existing researches which consider the single MSC/SGSN networks, we deal with the multi MSC/SGSN networks, where both MSC area and SGSN area should be determined as well. Fairness between traffic loads of MSC/SGSN and the system cost incurred to MSC/SGSN are also incorporated into our model, which make the model more realistic. We propose greedy algorithms for the problems, which consists of the merger of two neighboring areas and the movement of an area. Extensive experiment has been done based on the realistic problem examples. Followed by the analysis of parameter effect on the final solutions and the quality of final solutions obtained by our greedy algorithms. Our proposed model and analysis result can be used to determine WCDMA system areas and to predict the system performance measures by the determination.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.187-190
• /
• 2005

Ultra wideband (UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as WCDMA system. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum UWB source and an impulse radio UWB source, to a WCDMA digital transmission system. The average frame error rate degradations are presented. From these experimental results, we show that in all practical cases UWB system can coexist with WCDMA terminal without causing any dangerous interference.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.1
• /
• pp.148-154
• /
• 2015

Reports show that global system for mobile communication (GSM) mobile phones, or two-generation (2G) mobile phones, could affect functions of pacemakers and implantable cardioverter defibrillators (ICDs). In this study, we evaluated the effects of radio frequency electromagnetic fields (RF-EMFs) emitted by wideband code division multiple access (WCDMA) mobile phones, which were third-generation (3G) mobile phones, on pacemakers and ICDs. Five pacemakers and three ICDs were subjected to in-vitro test using a ECG simulator. We used a WCDMA module (average power : 0.25 W, frequency band : 1950 MHz) instead of a real WCDMA mobile phone. To assess the effects of the WCDMA module on pacemakers and ICDs, each implantable device was placed in close proximity (within 3 mm) to the WCDMA module for 5 min. As a result, no effects were observed on the five pacemakers and three ICDs for the RF-EMFs emitted by the WCDMA module. Because WCDMA mobile phones have the higher frequency band (1800-2200 MHz) and lower power output (0.01-0.25 W) than GSM moboile phone, the RF-EMFs emitted by WCDMA mobile phones do not affect patients with pacemaker or ICD.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.730-735
• /
• 2004

This paper describes what brings about DC offset and the impact or the DC offset on the performance or direct-conversion mobile receiver in WCDMA system. The performance degradation of $E_{b}/N_{o}$ due to the DC offset is presented through simulation result. Direct-conversion RF Transceiver which has the function of DC offset control is implemented and then applied to the WCDMA test-bed for the performance evaluation. The receiver performance degradation of $E_{c}/I_{o}$ is evaluated and analyzed by varying DC offset value. The practical test showed the minimum requirement of DC offset value to meet system performance.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.210-213
• /
• 2003

This paper presents a beamforming algorithm for the uplink application of a linear array antenna for WCDMA system. A steering beamforming algorithm is designed using a block DFT algorithm and its performance is analyzed and verified using computer simulations. Various environmental parameters such as the number of antenna elements, the number of users, the mobility of the target user, and the status of fast power control are reflected in the simulation study providing themselves as useful design and implementation guides for the reverse link beamforming of WCDMA system.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.36-47
• /
• 2003

Wideband Code Division Multiple Access (WCDMA) is one of the air interface techniques proposed for the third generation (3G) mobile communication system. WCDMA was selected because it fulfills the IMT-2000 requirements for higher data rate trans mission, support of multimedia capabilities and other flexible services due to its variable bit rates and larger bandwidth, improved capacity and coverage, efficient power control and support for advanced and improved detector structures. Performance evaluation of 3G wireless network through simulation plays an important role in the design and implementation of the actual system, aiding the wireless system designer by providing them the necessary performance conformance statistics prior to implementation. In accordance with this goal, a simulator engine was developed entirely on a MATLAB platform to emulate the behaviour of the WCDMA air interface for both the uplink and downlink in a real world fading mobile environment. This paper discuss the development of the simulator along with a brief description of its functionalities and user interface. The WCDMA air interface mode focused in this paper is in accordance to the 3GPPs frequency division duplex (FDD) mode and restricted to the physical layer description. Performance results for the selected cases for the downlink, uplink, varying mobile velocity and sampling rates are also provided.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.303-306
• /
• 2002

본 논문에서는 IMT-2000 WCDMA 시스템의 기지국의 수신신호에 대한 WCDMA 역방향링크 디지털 빔포밍 적용구조를 제시하고, 이의 성능을 측정하기 위한 빔포밍 시뮬레이터를 구현하였다. 실제 WCDMA 시스템에 근거해 수신 신호를 모델링하고, 기본 신호 모델을 대상으로 빔포밍과 전력제어등의 알고리즘을 적용하였다. 또한 셀네의 각 사용자들의 이동을 정의한 사용자 이동 프로파일을 구성하여 적용함으로써 실제 이동통신이 이루어지는 환경과 유사한 시뮬레이션 환경을 설정하게 되었고, 이를 통하여 빔포밍을 적용한 시스템에 대한 성능 분석의 신뢰도를 향상시켰다