• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.62.1-62.1
• /
• 2011

Warp phenomenon seems to be ubiquitous among spiral galaxies, and a a number of mechanisms have been suggested as the origin including cosmic infall and tidal interactions. In this work, we compare warp characteristics of cluster spirals and the ones in the field in order to investigate the influence of environment on warping, in particular of gas disks. We make use of a tilted-ring modeling (TRM) method to VLA HI (21cm) data cubes of carefully selected 20 spiral galaxies in the Virgo cluster. The TRM allows us to probe kinematics, e.g., inclination, position angle, and velocity dispersion of HI disks. We compare the properties of each tilted-ring component to mean properties based on optical images. In this contribution, we present preliminary yet important findings on the warp characteristics of spiral galaxies in dense environment, and discuss possible origins of those kinematical structures.

• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.51-62
• /
• 2021

On-chip caches of graphics processing units (GPUs) have contributed to improved GPU performance by reducing long memory access latency. However, cache efficiency remains low despite the facts that recent GPUs have considerably mitigated the bottleneck problem of L1 data cache. Although the cache miss rate is a reasonable metric for cache efficiency, it is not necessarily proportional to GPU performance. In this study, we introduce a second key determinant to overcome the problem of predicting the performance gains from L1 data cache based on the assumption that miss rate only is not accurate. The proposed technique estimates the benefits of the cache by measuring the balance between cache efficiency and throughput. The throughput of the cache is predicted based on the warp occupancy information in the warp pool. Then, the warp occupancy is used for a second bypass phase when workloads show an ambiguous miss rate. In our proposed architecture, the L1 data cache is turned off for a long period when the warp occupancy is not high. Our two-level bypassing technique can be applied to recent GPU models and improves the performance by 6% on average compared to the architecture without bypassing. Moreover, it outperforms the conventional bottleneck-based bypassing techniques.

• Journal of the Korean Society of Costume
• /
• v.58 no.10
• /
• pp.164-172
• /
• 2008

Soochonri tombs are assumed to be of the Baekje Kingdom in the early 5th century. We have examined 12 artifacts and 24 textiles in the four tombs. Along with hemp textiles, silk and embroidery threads were found In the Soochonri tombs. Within the hemp textiles both hemp and ramie were made using s-twist threads and the thread count distribution is calculated to be $8.5{\sim}15.5/cm^2$. Taffeta, one of the silk, can be categorized in to four types. First, the plain woven silk was made with warp and weft of the same thickness. The rates of thread count are also similar. Secondly the warp and weft are of the same thickness but has more spaces between threads. Third, the type of warp and weft is different in thickness, the thicker thread woven in the same direction. Lastly, a textile was woven with spaces the same as the width of the reed mark in every two warps. There were five compound weave found. Among them one was made with non-twisted thread for warp and s-twist thread for weft. One plain braiding with apparent spaces between threads were found. All three of the twining were made with wefts thicker than warps, barely showing the warps as a result. Textiles of the Soochonri tombs are the oldest of the Baekje Kingdom studied by far and therefore important artifacts of the Baekje Kingdom. These textiles are similar to those found in the King Muryeong's Tomb and tombs of Gaya and Shilla.

• Journal of the Korean Society of Costume
• /
• v.52 no.5
• /
• pp.145-154
• /
• 2002

1. The blended tabby whose warp and weft each employs a different kind of thread had been weaved since the era of the Three Kingdoms in this nation and since the period of Han in China. Especially in the 15th century. very finely weaved fabrics as the specialty of Chosun were exported to China. In the 16th century. blended tabby weaved with silk and cotton were often used for clothes as cotton was produced around the nation. And in the 17th century. blended tabby employing high quality Chinese raw silk other than existing ones were weaved. 2. It has been found in literature review that Honpo, one of Chosun's blended tabby. was manufactured mainly in Hamkyung, Cholla and Kyungsang provinces and mostly distributed through markets of Chungchong and Cholla provinces. 3. Out of the total 19 fabric pieces. 13 employed silk thread as the warp and cotton thread as the weft. Compared with the weft. in general. the warp is given more tension when weaved and more friction by spindles, being more likely to be twisted than the weft. In addition to starching, a stronger thread is requested as the warp. It is natural that in the Chosun period, silk thread more stronger than cotton thread was used as the warp to make more durable fabrics. For the weft requiring lots of threads when weaved. cotton thread was mainly used in the 17th century because the thread could be easily obtained at that time. 4. So far the study has made an empirical review of Chosun's blended tabby. especially those of the 15th∼17th century, in terms of their production and distribution. Findings from the study have some limit because they have been made focusing on the 15th∼17th century not the whole period of Chosun. Therefore it is needed to complement those findings through further studies.

• The Research Journal of the Costume Culture
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2013

This study analyzed the characteristics of Korean traditional plain weave excavated from Sang-go period to Joseon Dynasty. To do this, this study classified the Korean traditional plain weave into fiber types(cotton, hemp & ramie, plain weaved silk), analyzed and compared the thickness, twist type of yarns and density by times. First, in characteristics of cotton, the average and maximum density of Joseon Dynasty were higher than those of Goryeo, twist type was mainly s-twist and the density of warp was higher than that of weft. Second, the maximum density of hemp & ramie was found in era of Three Kingdoms of Korea. In common characteristics of hemp & ramie, twist type was mainly s-twist(sometimes non-twist) to the Three Kingdoms of Korea and was changed into non-twist from the Goryeo. The density of warp was higher than that of weft in common. Generally, the average density of ramie was higher than that of hemp. Third, in the characteristics of plain weaved silk, twist type was mainly non-twist(sometimes s and z-twist) from Sang-go period to Joseon Dynasty. Warp-faced ribbed tabby was excavated in Goryeo, the average density of warp-faced ribbed tabby was higher than that of other fiber types plain weave. Generally, in all fiber types, the density of warp was higher than that of weft.

• Journal of Fashion Business
• /
• v.10 no.4
• /
• pp.151-162
• /
• 2006

This study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the reflectance of polyester is higher than that of cotton over the whole wavelength. Second, the dyeing of polyester uses the disperse dyes and that of cotton uses fiber-reactive dyes, the differences in the features of dyes and the reflectance of fabrics cause the same colors to be perceived different by the angle of observation. Third, the dyeing of cotton and PET fabrics individually with the same color revealed that the dyeing of cotton and PET fabrics in one bath resulted in a small difference in colors between the two fabrics than the separate dyeing in two bathes. In the case of one bath, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Fourth, when cotton/PET union fabrics were dyed in ten colors, the difference in colors between the two fabrics was small; and due to the difference in the density of warp and weft of union fabrics, some difference was detected in comparison with the results of separate dyeing of cotton and PET fabrics in one bath. The latter did not produce the changes in color which was recognizable with the naked eyes. Fifth, when cotton/PET union fabrics were dyed in ten colors, any color change was not observed by the measuring angle, and the inclination in the direction of warp or weft resulted in the tendency of color-deepening. In the measurement of the latter, the inclination in the direction of weft resulted in the higher color-deepening than that in the direction of warp, due to the influence of weft.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.294-301
• /
• 1998

Towing performance of a midwater trawl system was examined aboard the training ship KAYA(2900ps) at the East Sea using the midwater trawl gear that had been designed and manufactured in accordance with the vessel. In this experiment, the trawl system data, the towing speed, the length and tension of the warp, net mouth height, and the depth of otter boards and net were measured and analyzed. The results are as follows: 1. In case of heaving in the warp with constant towing speed, the tension was suddenly increased and then again was reduced and after returned to the original steady state tension. At this time, net height was reduced a bit by ascension of ground rope, but returned to it’s original value. In the case where the warp was paid out, the tension was suddenly decreased and after increased and then returned to the tension of the original state, and the net height was greatly increased instantly by the sinking of the ground rope and then returned to the steady state 2. In the case of increased towing speed mm constant warp length, the tension was increased, and reducing the net height, the gear depth was decreased. On the other hand, in the case where towing speed was reduced, the tension was reduced and the gear depth and net height was increased. 3. Otter boards show a swing motion in the scope of 5~ 10m continuously. Otter boards responded to the state change of the trawl system at first, and then the motion of the net appeared. 4. The depth of net center was about 20m deeper than that of the otter boards, it shows about 0.4 times the warp length at the 4knots towing speed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.274-280
• /
• 2000

To analyze the resistance of the bottom trawl which is composed with 6 seams net, the field experiment was carried out on the sea near Kokunsan Is., western sea of Korea. The resistance was respectively measured in the otter board and the net according to the change of warp length and towing speed. The results obtained are summarized as follows : 1. Total resistance of the test trawl gear are slightly increased according to the length of warp. 2. The resistance of net is increasing a little according to the length of warp, but it is expressed. $$ R_n/=10 \frac{d}{\ell}$representatively. 3. The resistance of otter board can be expressed $Rb=1810_{\upsilon}^0.8.$ 4. Comparing with the value of measuring resistance and Koyama formula resistance by the length of warp respectively, the resistance of test trawl gear is high in the slow towing speed, and the resistance of Koyama formula is high in the fast towing speed, and that the cross-point of the both line between the resistance of the test net and Koyama formula is moved to high according to the increment of warp length.

• Journal of the Korean Society of Costume
• /
• v.57 no.8
• /
• pp.37-47
• /
• 2007

This study is considered about the fabrics of the tomb of King Muryeong at the Baekje(百濟) Period. First, there were silk fabrics such as compound woven silk(錦), twill damask(綾), complex gause(羅) and plain weaved silk(平絹). All of compound woven silk(錦) are the warp-faced compound tabby(經錦) of plain weave and the density is various from high to low one. The twill damask(綾) was a variation of twill damask weaved with a six strand warp thread. The complex gause(羅) made patterns as a set of 2 strand, 4 strand, 6 strand and 8 strand warp threads are weaved alternately with the weft. There were three kinds of plain weaved silk(平絹). The first was weaved densely without space between strands. The second was weaved with a small space between strands. And the third was weaved with a two strand warp thread, having a space between the threads. On the other hand, several pieces of well preserved ramie cloth were excavated. Of the, the densest one has the density of 125 strand/inch for the warp and the weft. In addition, strings made of flax thread were found. This suggests that flax fabrics may be found additionally if the hardened lumps of fabrics are resolved and analyzed. Other materials discovered include knits, knotted strings, embroideries, threads and floss. Pieces considered knits and knotted strings occupy a large part of fabrics excavated from King Muryeong's Tomb, and in particular knotted strings show various knotting methods. In addition, embroideries such as chain stitch and button hole stitch are clearly observed. What is more, there are silk threads and hemp threads, which are presumed to have been used for dangling ornaments such as Yeongrak(瓔珞) and beads or for sewing. Besides, floss was found between fabrics.

• Textile Coloration and Finishing
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2000

The tensile properties of polyester warp knitted fabrics of satin and reverse satin structure with various lengths of underlap were studied. In the range of low tension, the satin warp knitted fabric showed larger tensile energy and elongation in the direction of $0^\circ$ and larger tensile linearity, tensile resilience and initial modulus in $90^\circ$. Meanwhile, reverse satin one showed larger initial moduli in 0$^{\circ}$ and larger the others in $90^\circ$. In the range of high tension, the tendencies of both fabrics in $0^\circ$ direction were almost the same as those in all direction. As the under laps were shorter for both fabrics, tensile linearity, tensile energy and elongation increased, but tensile resilience decreased in all directions. However initial moduli were changed little.