• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.35-45
• /
• 2000

The slipway, which is one of stern construction, is necessary for stern trawler to let fishing implements, such as fishing net, otter board and warp, go out effectively. It may be doubtable whether there is any possibility for deckwetness to occur because the slipway is obliquely in contact with sea surface. The author discusses any possibility for deckwetness through slipway of stern trawler in wind and waves. A 350 G/T class, ocean-going stern trawler is adopted for the present study. The stem trawler is particularly assumed to drift with fishing implements hung down the slipway due to internal or external accident during fishing operation in real sea. The author considers two factors as possibility for deckwetness to occur through slipway. One is mooring effect of fishing implements hung down the slipway under wind pressure, and the other is relative ship motion in vertical direction in waves. Through the numerical calculation, the author clarifies that there is thin possibility for deckwetness to occur from above two points of view.

• 한국생활과학회지
• /
• 제12권4호
• /
• pp.529-537
• /
• 2003

This study was conducted to manufacture the soluble micro-fiber and to synthesize low melting polymer for the interior fabric not to use the polyurethane resin causing some problems. Low melting polyester for weft yarn was introduced by adding 30-40 mol% ratio of isophthalic acid to a main chain of polyethylene terephthalate to decrease the melting temperature up to heat setting temperature. Micro-fiber for warp yarn consisted of both soluble and insoluble components with multi-layered structure. When the soluble micro-fiber was treated by alkaline hydrolysis with 3-5% concentration of NaOH, it showed the turning point at 28% weight loss since soluble polyester was hydrolyzed approximate five times faster than regular polyester.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.661-666
• /
• 2009

The purpose of this study is to analyze the dyeability of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type was composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter($195^{\circ}C$) for 60 seconds. In this study, we investigated the dye ability and fastness of the dyed PET fabric. Dye ability of E-type dyestuff is higher than S-type dyestuff. In the case of E- type dyestuff, the saturated dyeing time was 10minutes at $130^{\circ}C$. The washing fastness and light fastness were excellent as 4-5grade.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.191-194
• /
• 1995

The business of manufacturing is increasingly becomeing time-compresssing, precise and long-life oiented, owing to various needs form the consumers and harsh global competition. with the emergence of the layer laminate maunfacturing methods, it is possible to prototypes directly from 3D CAD and additive process, the production time and cost have shortened dramatically. However there are some problems like surface-step, dimensional deviation and warp. A newly developed powder casting is suitable for rapid-manufacturing metallic tools. Powder casting can serve as a promising repid tooling method because of high density charateristics and low dimensional shrinkage below 0.1% during sintering and infiltration. By this process, we have realized significant time savings bypassing the wait for prototype tooling and cost savings eliminating the expense of conventional prototype tooling process.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.113-121
• /
• 2005

How to extimate the angle of attack of a vertical V-type cambered otter board was described. A three-dimensional semi-analytic treatment of a towing cable system was applied to the field experiments of a midwater trawl obtained by the Scanmar system. Also the equilibrium condition of the horizontal component and vertical component of forces and moment around the otter board was used. When the warp length was 300m long and the towing speed was between 2.61 and 3.86 knots, the estimated angle of attack of the otter board was ranged between $24.7^{\circ}$ and $26.2^{\circ}$, though the maximum lift force was at the angle of attack $22^{\circ}$.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.352-357
• /
• 2004

In this study. the effects of combined environmental factors on mechanical and thermal analysis properties of graphite/epoxy composites were evaluated through a 2.5KW accelerated environmental aging tester. Environmental factors such as temperature. moisture, and ultraviolet were considered. A xenon-arc lamp was utilized for ultraviolet light. and exposure times of up to 3000 hours were applied. Several types of specimens - tensile, bending, and shear specimens those are warp direction and fill direction were used to investigate the effects of environmental factors on mechanical properties of the composites. The glass fabric $\sharp$650/AP300 was used for the fabrication of specimens. Mechanical degradations for tensile, bending and shear properties were evaluated through a UTM. Also. storage shear modulus. loss shear modulus, and tan $\delta$ were measured as a function of exposure times through a dynamic mechanical analyzer. Finally exposed surfaces of the composites were examined using II scanning electron microscope.

• 한국시뮬레이션학회논문지
• /
• 제5권2호
• /
• pp.41-58
• /
• 1996

The Discrete Event Systems Specification(DEVS) formalism specifies a discrete event system in a hierarchical, modular form. This paper presents a distributed simulation environment D-DEVSim++ for models specified by the DEVS formalism. D-DEVSim++ employs a new simulation scheme which is a hybrid algorithm of the hierarchical simulation and Time Warp mechanisms. The scheme can utilize both the hierarchical scheduling parallelism and the inherent parallelism of DEVS models. This hierarchical scheduling parallelism is investigated through analysis. Performance of the proposed methodology is evaluated through benchmark simulation on a 5-dimensional hypercube parallel machine. The performance results indicate that the methodology can achieve significant speedup. Also, it is shown that the analyzed speedup for the hierarchical scheduling time corresponds the experiment.

• Fibers and Polymers
• /
• 제1권1호
• /
• pp.45-54
• /
• 2000

Impact behaviors of the large deformable composites of Kevlar fiber reinforced composites of different preform structures have been investigated. An analytic tool was developed to characterize the impact behavior of the Kevlar composites. The image analysis technique, and deply technique were employed to develop energy balance equation under impact loading. An energy method was employed to establish the impact energy absorption mechanism of Kevlar multiaxial warp knitted composites. The total impact energy was classified into four categories including delamination energy, membrane energy, bending energy and rebounding energy under low velocity impact. Membrane and bending energy were calculated from the image analysis of the deformed shape of impacted specimen and delamination energy was calculated using the deplying technique. Also, the impact behavior of Kevlar composites under high velocity impact of full penetration of the composite specimen was studied. The energy absorption mechanisms under high velocity impact were modelled and the absorbed energy was classified into global deformation energy, shear-out energy, deformation energy and fiber breakage energy. The total energy obtained from the model corresponded reasonably well with the experimental results.

• ETRI Journal
• /
• 제39권3호
• /
• pp.428-436
• /
• 2017

State-of-the-art processors require increasingly complicated memory services for high performance and low power consumption. In particular, they request transfers within a burst in a wrap-around order to minimize the miss penalty of a cache. However, synchronous dynamic random access memories (SDRAMs) do not always generate transfers in the wrap-round order required by the processors. Thus, a memory subsystem rearranges the SDRAM transfers in the wrap-around order, but the rearrangement process may increase memory latency and waste the bandwidth of on-chip interconnects. In this paper, we present a memory subsystem that is effective for the wrapping bursts of a cache. The proposed memory subsystem makes SDRAMs generate transfers in an intermediate order, where the transfers are rearranged in the wrap-around order with minimal penalties. Then, the transfers are delivered with priority, depending on the program locality in space. Experimental results showed that the proposed memory subsystem minimizes the memory performance loss resulting from wrapping bursts and, thus, improves program execution time.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2006년도 춘계공동학술대회 논문집
• /
• pp.86-91
• /
• 2006

본 연구는 M사의 제조공정에서 얻어진 대 용량 데이터를 사용하여 실리콘 웨이퍼의 중요 품질특성 중 하나인 Warp 불량원인을 분석한 사례이다. 이론적으로는 많은 양의 데이터를 확보하고 있을 경우 검출력의 향상으로 공정의 미세한 변화를 보다 민감하게 탐지할 수 있을 것으로 생각된다. 그러나 현실적으로는 불필요한 정보 혹은 많은 잡음 요인들의 개입으로 인하여 공정에 대한 올바른 이해가 더 어려울 수도 있다. 본 연구는 공정에 대한 경험과 기술적인 지식을 활용하여 분석의 기본 방향을 설정하고 많은 양의 데이터를 체계적으로 분석한 후 분석 결과를 실질적인 측면에서 재검토하여 의미 있는 결과를 도출하는 순서로 진행되었다. 데이터 분석의 과정 및 결과는 공정의 자동화로 수많은 데이터가 실시간으로 기록되는 상황에서 잡음요인들로 인한 영향을 배제하고 핵심요인에 의한 영향을 파악하는데 참고할 수 있을 것으로 사료된다.