• 수산해양기술연구
• /
• 제32권1호
• /
• pp.1-6
• /
• 1996

Towing tension of the model nets were determined by the load cell(O~20kg, 20DBBP) in front of W$T_mA$ = 1.57 . $V^1.86$ (unit: kg, mlsec) $T_mB$= 1.58 . $V^1.90$ 2. The towing tension of the full scale net was almost coincided with the results obtained by the model experiment. The towing tension(T) can be expressed as a function of the towing veJocity(V) as T=479$V^1.75$(unit: kg, k't)

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1141-1145
• /
• 2005

This paper proposes a robust tension control algorithm for the let-off and take-up system driven by servo motor which is robust to disturbance and tension variation by using SVR(Support Vector Regression). Quality of textile goods in fiber manufacturing process highly depends on control of let-off, take-up and tension which are essential for constant tension control of yarn and textile fabrics and correct length of them. The physical properties of textile fabrics are very sensitive to several factors(temperature, humidity, radius change of warp beam etc.) which result in tension change. Rapid development of fiber manufacture machine for higher productivity requires control system for let-off, take-up and tension for robustness to sharp tension-variation and quick response. The validity and the usefulness of the proposed algorithm are thoroughly verified through numerical simulation.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.

• 연구논문집
• /
• 통권29호
• /
• pp.111-121
• /
• 1999

고속 Rapier loom에서 경사와 위사의 조직을 완성하여 직물을 제직하는 위입과 바듸침 기구는 캠구동 방식으로 동일축선 상에 4개의 캠이 설치되어 있다. 이들 캠들은 2개씩 한쌍을 이루면서 서로 공액운동을 수행하고 있으므로 정확한 설계에 의한 동기화운동이 필수적이다. 따라서 본 연구는 전체 거동의 파악을 위한 시스템의 정확한 해석과 컴퓨터 시뮬레이션을 통한 Rapier loom의 고속화를 목적으로, 위입과 바듸침기구의 곡선선정 및 캠의 회전에 따라 정확한 운동을 유도할 수 있도록 2가지 운동의 연관성은 물론 동시에 화면상에 구현할 수 있는 4개의 캠기구에 대한 시뮬레이션 프로그램을 개발하는 것이다.

• Composites Research
• /
• 제28권3호
• /
• pp.136-141
• /
• 2015

The stitching process has been widely utilized for the improvement of through-thickness property of the conventional laminated composites. This paper reports the effects of stitching on the flexural and interlaminar shear properties of multi-axial warp knitted (MWK) composites in order to identify the mechanical property improvements. In order to minimize the geometric uncertainties associated with the stacking pattern of fabrics, the regular lay-up was considered in the examination of the stitching effect. The key parameters are as follows: the stitch spacings, the stitching types, the stitching location, and the location of compression fixture nose. These parameters have little effect on the flexural and interlaminar shear properties, except for the case of stitching location. However, the geometry variations caused by the stitching resulted in minor changes to the mechanical properties consistently. Stitching on the $0^{\circ}$ fibers showed the lowest flexural strength and modulus (12% reduction for both properties). The stitch spacing of 5 mm resulted in 8% reduction for the case of interlaminar strength compared with that of 10 mm spacing.

• 복식
• /
• 제53권1호
• /
• pp.99-116
• /
• 2003

Knit is classified into two such as basic texture and applied one according to knitting principle, and the basic texture of weft knitting consists of single knit. rib knit, purl knit and interlock knit. The basic texture of warp knitting consists of double knit texture, double code knit texture and double vandyke knit texture. Fourteen costumes were produced with eighteen (18) different types and twenty four (24) raw materials, and we were trying to show a wide range of costumes produced with knitting by making two different brands at random and making different designs depending on four seasons. Knitting technique is very important element in that it allows special surface effectiveness and decides the characteristic of knitting materials. Knit designer plays very important roles such as selection of raw thread, deciding knitting technique and type of knitting machine in designing the knit. Therefore, the knit designer requires the ability to utilize the function of knitting machine to the maximum, the effort to acquire the variety of knitting technique, develop the new knitting technique and for the improvement of knitting design.

• 복식
• /
• 제57권1호
• /
• pp.163-175
• /
• 2007

This study examines 74 pieces of textiles of Daegaya found in the Jeesan-dong Tomb and Saeng-cho Tomb, and analyzes their characteristics and weaving techniques. Dagaya is known to have produced ramie and hemp from bast fibers. The hemp textiles were all woven in plain weave, and the ramie textiles were woven either in plain weave or plain braid. The ramie textiles were slightly more dense compared to the hemp textiles, however, both had average densities between 0.92 to 0.93, showing that they are balanced plain weave textiles. It was also found that S twist threads were used in the production of the hemp and ramie textiles. The dyed textiles on iron remains were found to be the oldest textiles to use dying techniques for patterns. Silk textiles were woven in plain weave, twill weave, and leno weave. All of the silk were made with non-twisted thread. The densities were between 30 to 58.3 and the the density rates were 1.0 to 2.5 for plain weave silk, this showed that varieties of plain weaver created by different densities of warp and well. The average density of cho was $53.4{\times}22.5/cm^2$ the density rate was about 2.40, therefore warp was woven more dense compared to the weft. There were degummed and raw silk used in silk textiles, but most of them were found to be degummed thread.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.585-590
• /
• 2006

In the variation of physical properties of adhesive fabrics, the objective of this study is to analyze fitness of fusible interlining to four sorts of fabrics for men's suit with various structural parameters. Four fusible interlinings are used for adhering to fabrics for men's suit. Mechanical properties of these 16 adhesive fabrics fused with these interlinings are measured by KES-FB system for analysing appearance and wearing properties of garments and for examining the fitness of fusible interlining to the fabrics for men's suit. The variation of bending property for adhesive fabrics are found to be higher in the order of interlining 1(Cotton30/Rayon70, plain), interlining 2(Polyester30/Rayon70, warp knit), interlining 4(Polyester, shingosen fabrics with drawing textured yarn) and interlining 3(Polyester, double dot coating interlining). The variation of adhesive effect shows the same results with bending property and shows negative relation with extensibility in weft direction per extensibility in warp direction(EM2/EM1). The variation of peel strength of adhesive fabrics, woolen fabrics in the case of face fabrics and interlining 3 in the case of interlining shows the largest value respectively.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.160-163
• /
• 1999

The mechanical properties and failure behaviour of carbon/phenolic composites were inverstigated by tension and compression. Carbon/phenolic composites were fabricated by infiltration of matrix into 8 harness satin woven fabric of PAN-based carbon fibers. The tensile and compressive tests were performed at 25℃ under air atmosphere and, at 400℃ and 700℃ under N₂ atmosphere. The tensile strengths of carbon/phenolic composites in with-laminar/0° warp direction were about 10 times higher than those in with-laminar/45° warp direction, which was analyzed due to a change of fracture mode from fiber pull-out by shear to tensile fracture of fibers. The fracture of carbon/phenolic composites in with-laminar/45° direction was analyzed due to delamination by buckling. Tensile and compressive strength of carbon/phenolic composites decreased to about 50% at 400℃, and to about 10% at 700℃ compared to that at room temperature. The main reason for the decrease of tensile or compressive strength with increasing temperature was analyzed due to a reduction of bond strength between fibers and matrix resulting from thermal degradation of phenolic resin.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.474-480
• /
• 2009

The purpose of this study is to prepare the hardness of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type were composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter from 120 to $195^{\circ}C$ temperature range for 60 seconds. In this study, we investigated the physical properties and melting behavior of PET fiber and the effect of the temperature of the pin tenter on the thermal bonding, mechanical properties. Melting peak of warp showed the thermal behavior of general PET fiber. However, melting peak of weft fiber(bicomponent fiber) showed the double melting peak. The thermal bonding of the PET fabric formed at about temperature of lower melting peak. The optimum thermal bonding conditions for PET fabrics was applied at $190{\sim}195^{\circ}C$ for 60seconds by pin tenter. On the other hand, the tensile strength of the PET fabric decreased with an increasing temperature of thermal bonding.