• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2371-2380
• /
• 2000

In this paper, we developed the proximity exposure system with the vertical structure of glass and mask stage to minimize the mask's warp caused by the pull of gravity. This system, which canirradiate the ultra violet through 1440 H 850 $\textrm{mm}^2$ and 1330X 1015 $\textrm{mm}^2$ exposure area, has the followingcharacteristics. The glass stage can be inclined by 80 degrees at vertical structure to load substrate withsafety on it. When the glass stage is the vertical state, the gap control, alignment control and exposureof ultra violet are executed. So, it enhances the pattern uniformity by minimizing the mask's warp. Theglass stage can also control the gap between the mask and the substrate by the coarse and fine motioncontrol. The mask stage can adjust the posture of photomask to the position of substrate by imageprecessing method. The galss stage for the gap control and the mask stage for the alignment aredesigned independently for each function.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.85-93
• /
• 2020

The research objective examines the effect of corporate governance on capital structure and its effect on liquidity policy and corporate performance. It tests the effect of capital structure and liquidity policy on corporate governance. It also examines the effect of liquidity policy on capital structure and the effect of capital structure on liquidity policy. The study population is all manufacturing companies that went public on the Indonesia Stock Exchange in the period 2010-2019. The research population is 182 manufacturing companies. The Judgment Sampling was used and 109 companies meet the research criteria. The study used panel data for ten years so that the amount of data observed was 1090 observations. The analysis tool uses Warp Partial Least Square (WarpPLS). The results showed that corporate governance had a significant positive effect on capital structure, but corporate governance had a significant adverse effect on liquidity policy, and corporate governance had a significant positive effect on corporate performance. Furthermore, capital structure has a significant negative effect on corporate performance, but liquidity policy has no significant effect on corporate performance. Capital structure and liquidity policy are proven to be reciprocally significant positive correlations for manufacturing companies in Indonesia.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.639-647
• /
• 1990

Dynamic time warp(DTW) needs for interative calculations and the design of PE cell suitable for the operations is very important. Accordingly, this paper aims at the real time recognition design which enables large dictionary hardware realization using DTW algorithm. The DTW PE cell is seperated into three large blocks. "MIN" is the one block for counting accumulated minimum distance, "ADD" block calculates these minimum distances, and "ABS" seeks for the absolute values to the total sum of local distances. We have accomplisehd circuit design and verification for the MIN blocks, and performed MIN layout and DRC(design rule check) using 3um CMOS N-Well rule base.ing 3um CMOS N-Well rule base.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.1
• /
• pp.69-79
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.

• Journal of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.9-16
• /
• 2007

We examine the morphology and luminosity distribution of a strongly warped spiral galaxy PGC 20348 by conducting a detailed BVI CCD surface photometry using BOAO 1.8m telescope. The radial surface brightness shows a break at warp radius $(r_{\omega})$ with a shallow gradient in the inner disk and a steeper gradient in the outer disk. The luminosity of east side of the disk is ${\sim}0.5$ mag fainter than the west side at r > $r_{\omega}$. The reason for the asymmetric luminosity distribution is thought to be the asymmetric flarings that result in the formation of a large diffuse region at the edge of the east disk and a smaller diffuse region at the west disk. The vertical luminosity profiles show a thick disk component whose scale heights increase with increasing galactocentric distances. The warp of PGC 20348 seems to be made by the tidal interactions with the two massive companion galaxies since the flarings and radial increase of disk scale heights are thought to be general properties of tidally perturbed disks. According to the colors of the two clumps inside the diffuse region at the edge of the east disk, they seem to be sites of active star formation triggered by tidal forces from the companion galaxies.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1285-1295
• /
• 1999

본 논문은 방대한 크기의 볼륨 데이타를 효율적으로 렌더링하기 위한 셀 기반 웨이브릿 압축 방법을 제시한다. 이 방법은 볼륨을 작은 크기의 셀로 나누고, 셀 단위로 웨이브릿 변환을 한 다음 복원 순서에 따른 런-길이(run-length) 인코딩을 수행하여 높은 압축율과 빠른 복원을 제공한다. 또한 최근 복원 정보를 캐쉬 자료 구조에 효율적으로 저장하여 복원 시간을 단축시키고, 에러 임계치의 정규화로 비정규화된 웨이브릿 압축보다 빠른 속도로 정규화된 압축과 같은 고화질의 이미지를 생성하였다. 본 연구의 성능을 평가하기 위하여 {{}} 해상도의 볼륨 데이타를 압축하여 쉬어-？ 분해(shear-warp factorization) 알고리즘에 적용한 결과, 손상이 거의 없는 상태로 약 27:1의 압축율이 얻어졌고, 약 3초의 렌더링 시간이 걸렸다.Abstract This paper presents an efficient cell-based wavelet compression method of large volume data. Volume data is divided into individual cell of {{}} voxels, and then wavelet transform is applied to each cell. The transformed cell is run-length encoded according to the reconstruction order resulting in a fairly good compression ratio and fast reconstruction. A cache structure is used to speed up the process of reconstruction and a threshold normalization scheme is presented to produce a higher quality rendered image. We have combined our compression method with shear-warp factorization, which is an accelerated volume rendering algorithm. Experimental results show the space requirement to be about 27:1 and the rendering time to be about 3 seconds for {{}} data sets while preserving the quality of an image as like as using original data.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.68.3-68.3
• /
• 2016

We analyze the dependence of environment of warped galaxies by using the local background density, Tidal Index and projected distance as measures of the environment. we use galaxies with redshift less than z=0.025 from the Sloan Digital Sky Survey (SDSS) DR7. We selected 345 edge-on galaxies using color images provided by the SDSS DR7 and checked it using isophotal maps. This sample contains 136 warped galaxies, 209 non-warped galaxies. Among warped galaxies, there are 18 strongly warped galaxies which have warp angles larger than 7.5o. We calculated the fractional distributions of galaxies as a function of environmental parameters. All of these parameters show little difference between warped galaxies and non-warped galaxies if we include weakly warped galaxies. However, there is a clear difference in the fractional distributions between the strongly warped galaxies and non-warped galaxies. The fraction of warped galaxies increases with decreasing distance to the nearest neighbor galaxy but It increases with increasing background density and Tidal Index. However, the relationships between warp angles and the three environmental parameters are not strong. The effect of Tidal Index is well distinguished in small, bright galaxies whereas the effects of the background density and the distance to the nearest neighbor galaxy are more pronounced in large, bright galaxies.

• Journal of Digital Contents Society
• /
• v.18 no.3
• /
• pp.613-619
• /
• 2017

This paper presents a CUDA (Compute Unified Device Architecture) code to achieve correct GPU parallel segmented prefix operation results with less than 32 segment length for large data arrays. Mark Harris and Michael Garland had published CUDA code to address the tasks. This paper shows that their code does not generate correct results when the local segment length is less than 32, discusses the cause of the problem, and presents a CUDA code that generates correct results. The segmented parallel prefix operation presented in this paper can be applied as a building block to various large parallel processing algorithms including the k-nearest neighbor search problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.2
• /
• pp.149-157
• /
• 2004

Implicit finite element analysis of the flat surface-straight edge hemming process is performed by using a commercial code ABAQUS/Standard. Methods of finite element modeling for springback simulation and contact pair definition are discussed. An optimal mesh system is chosen through the error analysis that is based on the smoothing of discontinuity in the state variables. This study has focused on the investigation of the influence of process parameters in flanging, pre-hemming and main hemming on final hem quality, which can be defined by turn-down, warp and roll-in. The parameters adopted in this parametric study are flange length, flange angle, flanging die corner radius, face angle and insertion angle of pre-hemming punch, and over-stroke of pre-hemming and main hemming punches.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.599-602
• /
• 2005

This paper utilizing model picture of finished clothes in fashion design field various material (textile fabrics) doing Draping directly can invent new design, and do not produce direction sample or poetic theme width and confirm clothes work to simulation. Also, construct database about model and material image that can confirm Mapping result by real time. Development did the 2.5D Mapping system that used path extraction algorithm, warp algorithm, a lighting extraction and application algorithm in order to implement natural Draping of model picture and material image.