• 제목/요약/키워드: W-ratio

검색결과 4,336건 처리시간 0.033초

폐주물사를 혼입한 콘크리트의 최적 배합설계를 위한 기초적 연구 (Preliminary Study for Optimum Mix Design of Concrete Incorporation Waste Foundary Sand)

  • 백민경;이주형;김태경;윤경구;박제선
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 가을 학술발표회 논문집
    • /
    • pp.58-63
    • /
    • 1996
  • The waste foundry sand might be recycled in concrete, resulting in energy saving and environmental protection. An half Factorial Exprements were performed with the variables of W/C ratio, S/A, Sand/Waste foundry sand ratio and Slump as a preliminary study for optimum mix design of concrete. The results show that the W/C ratio is the most important factor to the concrete strength. The substitute of waste foundry sand up to 30% has little influence, saying that it can substitute the fine aggregate without damaging the concrete properties.

  • PDF

신축성 직물 스커트의 체형별 여유분에 관한 연구(II) - 마른 체형을 중심으로 - (A Study on Ease for the Skirt of Stretch Fabric according to the Body Type(II))

  • 설경희;서미아
    • 복식문화연구
    • /
    • 제9권4호
    • /
    • pp.652-663
    • /
    • 2001
  • The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to the body types to improve the aesthetics and wearing satisfaction. Therefore, fundamental data for aesthetic and functional patternmaking of the stretch skirt can be suggested. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+0cm and W - lcm for thin body type were suggested for the best fit. For the ease on hip, H+0cm and H-2cm for thin body type were suggested for the best fit. 2. The results from wearing satisfaction test were as fDllows. W+Ocm, H+Ocm for thin body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows: pattern reduction ratio 3.3 ∼ 5.0% of waist, 4.8 ∼7.2% of hip for thin body type were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows: For thin body type, W+0cm, W - lcm for waist and H+0cm, H-2cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for thin body type, and is satisfied with appearance and wearing satisfaction test.

  • PDF

신축성 직물 스커트의 체형별 여유분에 관한 연구(I)-표준 체형을 중심으로- (A Study on Ease for the Skirt of Stretch Fabric according to the Body Types(I))

  • 설경희;서미아
    • 복식문화연구
    • /
    • 제9권3호
    • /
    • pp.433-446
    • /
    • 2001
  • Recently, according to changes in fashion trends, the importance of stretch fabric stands out. A lot of studies on non-stretch woven fabrics have been made, but few studies on stretch fabrics has been made yet. Especially, the study on ease for the patterns, according to body types, of stretch has not been made at all. The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to standard body type to improve the aesthetics and wearing satisfaction. Therefore, fundamental data for aesthetic and functional patternmaking of the stretch skirt can be suggested. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+0㎝ and W-1㎝ for standard body type were suggested for the best fit. For the ease on hip, H+2㎝ and H+0㎝ for standard body type were suggested for the best wearing best fit. 2. The results from wearing satisfaction test were as follows. W+0㎝, H+2㎝ for standard body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows: pattern reduction ratio 3.0∼4.6% of waist, 2.1∼4.3% of hip for standard body type were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows: For standard body type, W+0㎝, W-1㎝ for waist and H+2㎝, H+0㎝ for hip were appropriate for stretch skirt pattern.

  • PDF

비만체형을 위한 신축성 직물 스커트의 여유분에 관한 연구 (A Study on Ease for the Skirt of Stretch Fabric according to the Fat Body Types)

  • 설경희;서미아
    • 복식문화연구
    • /
    • 제10권4호
    • /
    • pp.392-403
    • /
    • 2002
  • The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to fat body type to improve the aesthetics and wearing satisfaction. For this study, three college students were selected according to the fat body types; According to fat body types, 15 experimental skirt which were different each other in terms of the amount of ease on wait and hip, were made for the appearance test and wearing satisfaction test. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+2cm and W+0cm for fat body type were suggested for the best fit. For the ease on hip, H+2cm and H+0cm for fat body type were suggested for the best fit. 2. The results from wearing satisfaction test were as follows. W+2cm, H+2cm for fat body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows. pattern reduction ratio 0∼2.4% of waist, 1.9∼3.8% of hip for fat body type, were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows. For fat body type, W+2cm, W+0cm for waist and H+2cm, H+0cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for fat body type, and is satisfied with appearance and wearing satisfaction test.

  • PDF

마이크로 에멀젼 방법을 이용한 CaWO4의 합성 (Synthesis of CaWO4 by a Microemulsion Method)

  • 유은경;허영덕
    • 대한화학회지
    • /
    • 제52권2호
    • /
    • pp.164-168
    • /
    • 2008
  • 마이크로 에멀젼 방법으로 CaWO4 결정을 합성하였다. CTAB에 대한 H2O의 몰랄 농도비(w)를 변 화시켜서 다양한 크기와 형태의 CaWO4를 얻었다. w=5와 w=10일 때 각각 100 nm와 500 nm 길이의 타원형 CaWO4 결정을 얻었다. w=20일 때는 1 μm의 막대형 CaWO4 결정을 얻었다. w=30에서는 길이가 약 2~3 μm인 구형의 CaWO4 결정을 얻었다. CTAB에 대한 H2O의 몰랄 농도비가 증가 할수록 응집에 의해서 CaWO4 결정 의 모양은 타원형에서 막대형태를 거쳐서 구형으로 변했다.

TiN상에서의 CVD-W의 핵생상 및 성장속도 (Nucleation and Growth Rate of CVD-W on TiN)

  • 김의송;이종무;이종길
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1992년도 추계학술대회 논문집
    • /
    • pp.28-30
    • /
    • 1992
  • Long incubation period of W nucleation on the TiN glue layer is a serious problem in blanket W process. In this study we investigated the dependence of W nucleation and growth rate on the preparation method of the TiN film, deposition temperature, chemistry, $SiH_4/WF_6$ ratio and sputter etching, ion implantation, and $SiH_4$ flushing pre-treatments. Incubation periods of W nucleation and deposition rates of W growth on three different TiNs are in the order of TiN>RTP-TiN> annealed TiN and TiN${\leq}$RTP-TiN${\leq}$ annealed TiN, respectively. $\beta$-W is not found on TiN substrate even for high $SiH_4/WF_6$ ratio. Sputter etching pre-treatment increases incubation period of W nucleation, while it decreases deposition rate. $SiH_4$ flushing pre-treatment decreases incubation period, but it slightly decreases deposition rate.

  • PDF

저시멘트 소일콘크리트의 유동성 및 압축강도 특성 (Flow and Compressive Strength Properties of Low-Cement Soil Concrete)

  • 박종범;양근혁;황철성
    • 한국건설순환자원학회논문집
    • /
    • 제6권1호
    • /
    • pp.1-7
    • /
    • 2018
  • 본 연구에서는 산업부산물을 다량 활용한 소일콘크리트의 유동성 및 강도발현에 대한 결합재-흙의 비(B/S) 및 물-결합재비(W/B)의 영향을 평가하였다. 보통 포틀랜드 시멘트의 부분 치환재로서 바이패스 더스트 10%, 고로슬래그미분말 40%, 순환유동층 플라이애시 25%가 사용되었다. 저시멘트 결합재와 함께 사질토 또는 점성토를 사용하여 18 소일콘크리트 배합이 실험되었다. 실험결과 소일콘크리트의 유동성은 대상토(점성토 또는 사질토)의 종류에 관계없이 동일한 W/B에서 B/S가 클수록 증가하였다. 압축강도는 점성토 콘크리트보다 동일 배합조건을 갖는 사질토 콘크리트에서 컸다. 산업부산물 다량 활용 소일콘크리트의 배합은 압축강도 및 고유동성을 고려하면 대상토에 관계없이 B/S가 0.35 그리고 W/B는 175%가 추천될 수 있었다.

Dissolution Characteristics of Hydrophobic Drug-Soluble Carrier Coprecipitate (I)-Enhanced Dissolution Rates of Furosemide from Furosemide Polymer Coprecipitates-

  • 신상철;이민화;우종학
    • Journal of Pharmaceutical Investigation
    • /
    • 제6권3호
    • /
    • pp.48-57
    • /
    • 1976
  • An enhancement in the dissolution rate of the drug should facilitate its GI absorption if the absorption process is dissolution rate limited. One of the need for the techniques that can potentially enhance the dissolution rate and extent of absorption of hydrophobic drugs is the formation of coprecipitates with pharmacologically inert, polymeric materials. The physicochemical modification offers the advantage of possibly enabling one to administer the drug orally in a form from which it is most available for GI absorption. Several $investigation^{1-15)}$ demonstrated that the formation of solid dispersions or coprecipitates of relatively water-insoluble drugs with various pharmacologically inert carriers can increase singnificantly their in vitro dissolution rates. However, little information is available in the literature related to the dissolution rate patterns of furosemide, a water-insoluble diurectices, with respect to the sort of copolymer and the ratio of coprecipitates as a function of time, respectively. The purpose of the present investigation was to ascertain, the general applicability of the copolymers to use fore more fast, enhanced dissolution techniques of furosemide. To accomplish the need for enhancement in the dissolution rate of furosemide, varying ratio coprecipitates with different water-soluble polymers, such as polyvinylpyrrolidone (PVP), polyethylene glycol 4000(PEG 4000), and polyethylene glycol 6000 (PEG 6000), were quantitatively studied by comparing their dissolution characteristics of furosemide. The dissolution patterns of pure furosemide, varying ratio furosemide-PVP coprecipitates, (1:2, 1:5, and 1:9(w/w)), furosemide-PEG 4000 coprecipitates (1:4, 1:9, and 1:19(w/w), furosemide-PEG 6000 coprecipitates(1:4, 1:9, and 1:19(w/w)), and the same ratio physical mixtures, respectively, were compared by the amount dissolved as a function of time.

  • PDF

폭두께비에 따른 강판콘크리트구조의 압축거동 (Compression Behavior of Steel Plate-Concrete Structures with the Width-to-Thickness Ratio)

  • 한홍수;최병정;한권규
    • 한국강구조학회 논문집
    • /
    • 제23권2호
    • /
    • pp.229-236
    • /
    • 2011
  • 본 연구는 폭두께비(W/T)에 따른 중심압축하중을 받는 SC(Steel Plate-Concrete)구조의 압축거동 특성을 파악하는 것이 주목적이다. SC구조는 전단 연결재를 갖는 샌드위치 강판 사이에 콘크리트를 타설하여 시공하는 구조이다. SC구조의 실험체는 폭두께비(W/T)가 1.60와 3.56인 실험체로 구분하였다. 실험을 통하여 다음과 같은 결과를 얻었다. SC구조 실험체의 파괴양상은 최대압축강도에 도달하기 전에 스터드와 스터드 사이 강판이 국부좌굴하고 콘크리트는 일부 균열 및 박리현상이 나타났다. 또한 SC구조 실험체의 최대압축강도는 기존 설계기준식(AISC 2005, ACI318-05 및 KBC 2005)에 의한 압축강도보다 거의 크게 나타났다. SC구조 실험체의 폭두께비(W/T)가 증가할수록 강판에 의한 SC구조 실험체의 콘크리트 구속효과는 감소하는 것으로 나타났다.

Diagnostic Criteria of T1-Weighted Imaging for Detecting Intraplaque Hemorrhage of Vertebrobasilar Artery Based on Simultaneous Non-Contrast Angiography and Intraplaque Hemorrhage Imaging

  • Lim, Sukjoon;Kim, Nam Hyeok;Kwak, Hyo Sung;Hwang, Seung Bae;Chung, Gyung Ho
    • Investigative Magnetic Resonance Imaging
    • /
    • 제25권4호
    • /
    • pp.323-331
    • /
    • 2021
  • Purpose: To investigate the diagnostic criteria of T1-weighted imaging (T1W) and time-of-flight (TOF) imaging for detecting intraplaque hemorrhage (IPH) of a vertebrobasilar artery (VBA) compared with simultaneous non-contrast angiography and intraplaque hemorrhage (SNAP) imaging. Materials and Methods: Eighty-seven patients with VBA atherosclerosis who underwent high resolution MR imaging for evaluation of VBA plaque were reviewed. The presence and location of VBA plaque and IPH on SNAP were determined. The signal intensity (SI) of the VBA plaque on T1W and TOF imaging was manually measured and the SI ratio against adjacent muscles was calculated. The receiver-operating characteristic (ROC) curve was used to compare the diagnostic accuracy for detecting VBA IPH. Results: Of 87 patients, 67 had IPH and 20 had no IPH on SNAP. The SI ratio between VBA IPH and temporalis muscle on T1W was significantly higher than that in the no-IPH group (235.9 ± 16.8 vs. 120.0 ± 5.1, P < 0.001). The SI ratio between IPH and temporalis muscle on TOF was also significantly higher than that in the no-IPH group (236.8 ± 13.3 vs. 112.8 ± 7.4, P < 0.001). Diagnostic efficacies of SI ratios on TOF and TIW were excellent (AUC: 0.976 on TOF and 0.964 on T1W; cutoff value: 136.7% for TOF imaging and 135.1% for T1W imaging). Conclusion: Compared with SNAP, cutoff levels of the SI ratio between VBA plaque and temporalis muscle on T1W and TOF imaging for detecting IPH were approximately 1.35 times.