• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.139-165
• /
• 1991

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfata and the magnesium sulfate promoted the hardening and the aluminium phoshpate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect fo the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near $250^{\circ}C$ and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate ad cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.673-679
• /
• 2004

A microbial cryoprotectant formulation using a W/O/W multiple emulsion system was developed. The psychrotolerant microorganism, B4, isolated from soil in South Korea, was observed by the drop freezing method, in which the microorganism sample inhibited ice nucleation activity. The antifreeze activity was eliminated when the microorganism sample was treated with protease, indicating that the antifreeze activity was due to the presence of antifreeze protein. The result of the l6S rDNA sequencing indicated the B4 strain was most closely related to a species of the genus Bacillus. Culture broth of B4 strain (Bacillus sp.) and rapeseed oil containing 1 % polyglycerine polyricinolate (PGPR) were used as core and wall material, respectively. The most stable W/O emulsion was prepared at a core/oil ratio of 1:2. The highest W/O/W emulsion stability was achieved when the primary emulsion to external aqueous phase containing 0.5% caster oil polyoxyethylene ether $(COG25^{TM})$ ratio was 1:1. Microcrystalline cellulose showed better W/O/W emulsion stability than other polymer types. The viability of cells in a W/O/W emulsion was higher than free cells during storage at $37^\circ{C}$. An acidic pH and UV exposure decreased the viability of free cells, but cells in W/O/W emulsion were more stable under these conditions.

• 한국조리학회지
• /
• 제23권8호
• /
• pp.163-172
• /
• 2017

In order to investigate the quality characteristics of Prunus persica Batsch var. davidiana Max. preserved in sugar, the quality characteristics were examined by dividing them into four groups: PS-A (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 100:0, w/w), PS-B (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 60:40, w/w), PS-C (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 40:60, w/w) and PS-D (P. persica preserved in sugar mixed with sucrose and oligosaccharides at a ratio of 0:100, w/w). The results were as follows: pH levels and soluble solid contents of PS-D sample were lower than those of the others, however total acidity value were higher. In case of Hunter's value, the 'L', 'a' and 'b' values of all samples were affected by addition of oligosaccharides. No great difference occurred among samples in reducing sugar contents. Organic acid content was significantly decreased with the lower addition of sucrose. The predominating organic acid components analyzed in all samples were lactic acid 156.15 g/100 g, tartaric acid 72.75 g/100 g and citric acid 32.90 g/100 g. The highest contents of total phenol and flavonoid, and DPPH and ABTS radical scavenging activity were $10.79{\pm}0.55mg\;GAE/mL$, $8.71{\pm}0.06mg\;CE/mL$ and 71.8%, 71.0% for PS-D, respectively. The results of this study indicated the use of oligosaccharides could increase the quality and antioxidant potentials of P. persica preserved in sugar.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.16-20
• /
• 2002

In this study, the 95W heavy alloys of 3/7, 5/5 and 7/3 of Ni/Fe ratio were sintered at the temperature range between 1420 and $1480^{\circ}C$ for 1h and their microstructures were discussed for an effect of the ${\mu}$-phase $(Fe_7W_6)$ on the microstructure. The ${\mu}$-phase was observed in the only 95W-1.5Ni-3.5Fe alloy of 3/7 and it is thought to be formed and grown from the surface of the W particle. The W particle was surrounded with the ${\mu}$-phase and there were only the W particles and this phase without Ni-Fe-W matrix at the most part. The ${\mu}$-phase changed the interphase structure in the alloy and the grain growth of the W was suppressed because of interrupting the solution-reprecipitation of the W. The W content in the matrix was considered to be lowered due to the interruption of the solution-reprecipitation and the formation of the ${\mu}$-phase in the .

• 콘크리트학회논문집
• /
• 제29권3호
• /
• pp.275-281
• /
• 2017

본 연구는 물-결합재비(water-to-binder ratio, W/B) 및 인산염-결합재비(phosphate-to-binder ratio, P/B)가 마그네시아-인산칼륨 시멘트(magnesium-potassium phosphate cement, MKPC) 모르타르의 플로, 응결시간, 압축강도발현 및 pH 변화에 미치는 영향성에 대한 평가이다. MKPC 모르타르의 P/B가 0.3 및 0.5일 때 W/B 범위 20~40%에 대하여 10 배합의 모르타르 실험을 실시하였으며, X-선 회절 분석(X-ray diffraction, XRD), 전자현미경(scanning electron microscope, SEM) 및 수은압입법(mercury intrusion porosimetry, MIP) 분석을 위해 MKPC의 반응생성물 및 미세공극분포를 평가하였다. 실험결과, MKPC 모르타르의 플로 및 응결시간은 P/B의 증가에 따라 감소하였으며, P/B가 0.3에서 0.5로 증가함에 따라 종결시간은 약 24% 감소하였다. MKPC 모르타르의 초기 압축강도 발현 기울기의 경우 콘크리트 구조기준에서 제시하는 시멘트 콘크리트 대비 높은 수준에 있었다. 재령 28일의 압축강도 30 MPa 이상 및 pH 9.0 이하를 만족하기 위해 MKPC 모르타르의 P/B 및 W/B는 각각 0.5이상 및 30% 이하가 추천된다. MKPC의 반응생성물인 스트루바이트(struvite)-K의 결정은 MKPC의 P/B 및 W/B가 높을수록 증가하였는데, 이로 인해 거대 모세관 공극은 감소하였다.

• 유기물자원화
• /
• 제6권2호
• /
• pp.45-57
• /
• 1998

이 실험의 목적은 혼합된 제지 하수슬러지에 최적의 공극개선재로서 woodchips의 혼합비율을 설정하기 위한 것이다. 공극개선재는 제지슬러지와 하수슬러지(건물중 2:1)혼합물에 0(W-0), 20(W-20), 33(W-33), 50(W-50)%의 부피비로 혼합되었고 강제송풍에 의한 정체식으로 퇴비화를 실시하였다. 퇴비의 부숙도를 평가하기 위하여 이화학성 변화를 조사하였다. W-33과 W-50 처리구에서 온도는 퇴비화가 시작하자마자 상승하여 5일째 $60^{\circ}C$ 이상까지 이르렀다. 열수가용성 C/N율의 감소는 퇴비화 초기에 W-0과 W-20 처리구에 비해 W-33과 W-50 처리구에서 두드러졌다. 열수가용성 $NO_3{^-}-N$은 퇴비화 초기에 거의 변화를 보이지 않다가 퇴비화 20일 이후에 빠르게 증가하였으며 W-0 처리구가 그 증가량이 가장 적었다. G.I.값은 W-50 처리구에서 20일째, W-0은 30일째 이후 80이상으로 높아졌다. 이상의 결과를 토대로 공극개선재의 혼합은 33%이상이 합리적이었으나, 특히 W-50 처리구는 송풍에 의한 온도조절이 어려웠으며, 공극개선재의 구입 및 단가 그리고 생산되는 퇴비량을 고려한다면 공극개선재를 33% 혼합하는 것이 가장 이상적이다.

• 한국디지털건축인테리어학회논문집
• /
• 제11권3호
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• 대한화장품학회지
• /
• 제41권4호
• /
• pp.303-313
• /
• 2015

센텔라 아시아티카 정량추출물(TECA)은 병풀에서 얻은 난용성 추출물로 상처치유 및 항주름 물질로 알려져 있다. 본 연구에서는 TECA를 함유한 water in oil in water ($W_1/O/W_2$) 에멀젼 제조에 필요한 최적의 실험 조건을 찾기 위해 연구를 진행하였다. TECA의 용해도는 UV 흡광도계를 이용하였으며, 디프로필렌글라이콜(40.0 g), 에탄올(20.0 g) 및 정제수(10.0 g)의 조성에서 2.55 g의 TECA가 용해되는 것을 확인하였다. 에멀젼($W_1/O$, $W_1/O/W_2$)의 안정도에 영향을 미치는 요인에 대하여 조사하였다. $W_1/O$ 에멀젼의 제조하기 위한 최적의 수상 조건은 디프로필렌글라이콜 : 에탄올 : 정제수 : TECA가 40.0 : 20.0 : 10.0 : 2.5%(w/w), 유상 조건은 스쿠알란 : 세틸피이지/피피지-10/1디메치콘 : 세테아릴알코올이 22.5 : 4.0 : 1.0%(w/w)임을 확인하였다. $W_1/O/W_2$ 멀티에멀젼을 제조하기 위한 최적의 조건은 정제수 : $W_1/O$ 에멀젼 : 폴리소르베이트 80 : 카보머 : 트리에탄올아민의 비율이 55.8 : 40.0 : 4.0 : 0.1 : 0.1% (w/w)임을 확인하였다.

• Smart Structures and Systems
• /
• 제17권1호
• /
• pp.73-89
• /
• 2016

The stress dependence of ultrasonic wave velocity is known as the acoustoelastic effect. This effect is useful for stress monitoring if the acoustoelastic coefficient of a subject medium is known. The acoustoelastic coefficients of metallic materials such as steel have been studied widely. However, the acoustoelastic coefficient of concrete has not been well understood yet. Basic constituents of concrete are water, cement, and aggregates. The mix proportion of those constituents greatly affects many mechanical and physical properties of concrete and so does the acoustoelastic coefficient of concrete. In this study, influence of the water-cement ratio (w/c ratio) and the fine-coarse aggregates ratio (fa/ta ratio) on the acoustoelastic coefficient of concrete was investigated. The w/c and the fa/ta ratios are important parameters in mix design and affect wave behaviors in concrete. Load-controlled uni-axial compression tests were performed on concrete specimens. Ultrasonic wave measurements were also performed during the compression tests. The stretching coda wave interferometry method was used to obtain the relative velocity change of ultrasonic waves with respect to the stress level of the specimens. From the experimental results, it was found that the w/c ratio greatly affects the acoustoelastic coefficient while the fa/ta ratio does not. The acoustoelastic coefficient increased from $0.003073MPa^{-1}$ to $0.005553MPa^{-1}$ when the w/c ratio was increased from 0.4 to 0.5. On the other hand, the acoustoelastic coefficient changed in small from $0.003606MPa^{-1}$ to $0.003801MPa^{-1}$ when the fa/ta ratio was increased from 0.3 to 0.5. Finally, it was also found that the relative velocity change has a linear relationship with the stress level of concrete.

• 보험의학회지
• /
• 제2권1호
• /
• pp.195-217
• /
• 1985

A statistical analysis on the ratio of weight-for-height in insurance medicine was carried out in a total of 12,690 insured persons who were medically examined at the Honam medical department, Dong Bang life insurance company, ltd. from June, 1979 to February, 1984. The results were as follows: 1. The mean value of the ratio of weight-for-height(W/H ratio) was $102.3{\pm}11.3%$ in all males, and $105.2{\pm}103.6%$ in all females. The difference of the values between males and females showed statistical significance(P<0.001). The mean value of W/H ratio in all the insureds was $103.8{\pm}12.9%$. In each age group, the mean value of female was higher than that of male without exception(P<0.001). The mean value of both sexes in each age group showed gradual increase with age except for the age group over 50(P<0.001). 2. The incidences of the average weighted, overweighted and underweighted lives were respectively 91.6% in all males, 84.2% in all females(P<0.001); 7.9% in all males, 15.4% in all females(P<0.001); 0.5% in all males, 0.4% in all females(P>0.05). The incidences of average weighted, overweighted and underweighted lives in all the insureds were respectively 87.6%, 12.0% and 0.5%. The incidence of the average weighted lives in male in each age group was always higher than that in female with the exception of the age group below 19(P<0.001), whereas the incidence of the overweighted lives in male in each age group was always lower than that in female(P<0.05 in the age group below 19, P<0.001 in the other age groups). The incidence of average weighted lives of both sexes in each age group showed gradual decrease with age from the second to fifth decade(P<0.001), whereas the incidence of the overweighted lives of both sexes in each age group showed gradual increase with age from the second to fifth decade(P<0.001). 3. The relative frequency distribution polygons of W/H ratio of both sexes drawn in a pair on one coordinate plane revealed lying in juxtaposition each other horizontally and showed the shifting of female's polygon to male's one toward the direction of greater value of W/H ratio at a short distance which increased gradually with age. 4. Correlations between both sexes and among age groups relating to W/H ratios of the insureds seem to be a physiological phenomenon of body build and should be considered on the rating of the build. Author prepared a rating table of build based on the correlations above menthioned. Some gradients by sex and age in the rating table of build are organized; in female group, the ratings of 0, 30-50, 50-100 and 100-D are to calculate by the build with W/H ratio of 80-125%, $126{\sim}145%,\;146{\sim}165%$ and over 166% respectively in the age group of 29 or under, by the build with W/H ratio of $80{\sim}130%,\;131{\sim}150%,\;151{\sim}170%$ and over 171% respectively in the age group of $30{\sim}59$, and by the build with W/H ratio of $80{\sim}135%,\;136{\sim}155%,\;156{\sim}175%$ and over 176% respectively in the age group of 60 or over. In male group, the ratings of 0, $30{\sim}50$, 50-100, and 100-D are to calculate by the build with W/H ratio of $80{\sim}120%,\;121{\sim}140%,\;141{\sim}160%$ and over 161% respectively in all ages. Of under weighted lives, in both sexes, the ratings of 30-50 and 50-D are to calculate by the build with W/H ratio of $76{\sim}79%$ and under 75% respectively. The results of the ratings according to a rating table by author were as follows: The incidence of the ratings of 0, 30-50, 50-100 and 100-D showed no difference between male and female. The incidence of the ratings of 0(indicating the average weighted lives) showed gradual decrease with age and the incidence of the ratings of 30-50 and 50-100(indicating the overweighted lives) showed gradual increase with age. These results are thought to be considerably reasonable because the incidence of the builds in each age group is supposed to have no difference by sex and the incidence of the overweighted lives would increase with age.