• Journal of Nutrition and Health
• /
• v.24 no.5
• /
• pp.399-407
• /
• 1991

The purpose of this study was to estimate the intake of individual fatty acid and eventually to contribute to the establishment of dietary guidelines and recommendations of fatty acids for the Koreans. The subjects consisted of female college students aged 20 to 29 years old. Their dietary intake was assessed twice. in summer and in winter, by means of a 24-hour dietary recall method. Food models and other measuring tools were also used. Concentrations of serm total triglyceride, total cholesterol and HDL-& LDL-cholesterol were measured. The subjects consumed 12.3g of polyunsaturated fatty acids, 14.3g of monounsaturated fatty acids and 14.99g of saturated fatty acids per day The ratios of polyunsaturated/saturated fatty acids( P/S) and polyunsaturatedimonounsaturatedi saturated fatty acids (P/M/S) taken by the subjects were 0.8/1.0 and 0.8/l.0/l.0, respectively. The ratio of w61w3 fatty acids was found to be 8.3/l.0. All of these values seem to fall in the desirable range. The percentages of total calorie from carbohydrate. fat and protein were 59.4%, 23.4% and 17.2%, respectively. The concentrations of serum total triglyceride, total cholesterol. HDL-cholesterol and LDL-cholesterol were 59.3ms/dl, 192.7mg/dl, and 59.0mg/dl, and 121.9mg/dl., respectively.

• The KSFM Journal of Fluid Machinery
• /
• v.15 no.3
• /
• pp.32-38
• /
• 2012

This paper is aimed to propose the design database(DB) of the inline micro-turbine for 5kW class. CFD analysis is performed to investigate the effect of a turbine on each parameter. This study showed that RadhaKrishna's data is different from the 5kW class in the low-head and the micro-turbine. Therefore, new DB for the design of inline micro-turbine for 5kW class could be needed. This study configured new design DB for the design of inline micro-turbine for 5kW class. The DB of this study showed that the optimal hub ratio(Dp/DR), the optimal body ratio(Db/DR) and the optimal range of body length ratio(Lh/DR) is 50%, 1.1 and 2.3 to 2.9, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.1
• /
• pp.95-101
• /
• 2011

We estimated on the stability of W/O type emulsified fuel using by capacitance sensor, so it concluded the following conclusions. For the first 24 hours, prepared emulsified fuel reveals phase separation ratio of 5%, maintains stable status which verifies the stability of emulsified fuel. Adding more water increases the phase separation ratio rapidly, and adding more surfactant displays stable emulsification. Adding water causes larger size of water droplet diameter, and adding surfactant mixture causes smaller size of water droplet diameter. In conclusion, the size of W/O type emulsified fuel water droplet diameter is directly related to the volume of surfactant, and density of water droplet diameter changes thedistribution according to water contents.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.801-810
• /
• 2015

The ultimate pullout capacity under inclined dynamic loading is an important measure of the destruction degree of vertical screw piles (anchors) under dynamic actions. Based on the static and dynamic tests on two kinds of model screw piles, the ultimate bearing capacity was researched considering different distance-width ratio of blade (D/W) and preloading ratio. The results compared well with other experimental data available in the literature. This research reveals that D/W might determine the failure model of the piles (anchors), for example D/W = 3.14 or 5; a critical dynamic-static loading ratio (DSLR) existed in the experiments. The critical DSLR was reached under the conditions of 40%~60% preloading (D/W = 3.14) or 20%~40% preloading (D/W = 5), respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.219-220
• /
• 2010

This study investigated endurance properties of marin concrete corresponding to various W/B ratio and cement to develop long-life-time marin concrete insured durability.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.305-312
• /
• 2013

This paper reports the results of an investigation into the effects of silica fume on strength properties of alkali-activated slag cement (AASC) with water-binder (W/B) ratio and replacement ratio of silica fume content. The W/B ratio varied between 0.50 and 0.60 at a constant increment of 0.05. The silica fume content varied from 0% to 50% by weight of slag. The activators was used sodium hydroxide (NaOH) and the dosage of activator was 3M. The strength development with W/B ratio has been studied at different ages of 1, 3, 7 and 28 days. For mixes of AASC mortars with varying silica fume content, the flow values were lower than the control mixes (without silica fume). The flow value was decrease as the content of silica fume increase. This is because the higher surface areas of silica fume particles increase the water requirement. The analysis of these results indicates that, increasing the silica fume content in AASC mortar also increased the compressive strength. Moreover, the strength decreases with the W/B ratios increases. This is because the particle sizes of silica fume are smaller than slag. The high compressive strength of blended slag-silica fume mortars was due to both the filler effect and the activated reaction of silica fume evidently giving the mortar matrix a denser microstructure, thereby resulting in a significant gain in strength.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.272-279
• /
• 2006

In this paper, we evaluate the performance of frame synchronization words of pilot bit patterns which are used for the channel estimation and frame synchronization confirmation in W-CDMA(Wide band Code Division Multiple Access) system. W-CDMA system also uses compressed mode to make measurements from another frequency without a full dual receiver terminal. It is confirmed by using computer simulation that the proposed frame synchronization words also maintain the frame synchronization property in the compressed mode by using the complementary mapping relationship of preferred pair ROC(Receiver Operating Characteristic) curves with probability of detection and false alarm are used to analized the performance of the proposed frame synchronization words by using the various detection metrics such as LLRT(Log Likelyhood Ratio Test), GLRT(Generalied Likelyhood Ratio Test), soft and hard correlation tests in AWGN and Rayleigh fading channels. It is expected that the research results fer the performance of pilot bit patterns of this paper can be useful reference for the design and implementation of frame synchronization in 3rd generation W-CDMA system.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.432-438
• /
• 2011

We need to make the standard of the best baffle shape and L/W ratio of clearwell due to insufficient disinfection in short L/W ratio and uneconomic design in long L/W ratio. The objectives of this research were to evaluate the best shape of baffle and economic L/W ratio in the all sorts of shape and size by using computational fluid dynamics. In the results of this research, the baffle with smaller number of turning flow is more beneficial for hydraulic efficiency. So, even if the same shape and structure, baffle should be designed as smaller number in turning flow. The best shape of baffle is ZigZag type (model 2) and the worst shape is Distributed types (model 4). The ZigZag type can reduce number of baffle about 67% than that of the Distributed types. In the ZigZag type, economic L/W ratio is 30~50. If L/W ratio exceed over 50, it is not economic because construction costs greatly increase and an increasing rate of $T_{10}/T$ is very small.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.175-180
• /
• 1999

The heating system of korea apartment house is called Ondol. The surface finishing mortar of this floor system typically used the cement based mortar, where the surface finishing mortar easily appears the crack. To order to crack control, the cement that added expansive additive used to reducing dry-shrinkage. For the surface finishing mortar, the types of shrinkage is known as plastic shrinkage, dry-shrinkage and autogenous This experimental study is to investigate the difference on dry-shrinkage of the cement that added expansive additives and OPC. The test method is varied the ration of water/cement (W/C) and the ratio of sand/cement(S/C). For OPC, The increase of the ratio of S/C is reduced dry-shirnkage but for the cement that added expansive additives, the increase of the ratio of S/C is augmented dry-shrinkage For OPC, The increase of the ratio of W/C is augmented dry-shrinkage but for the cement that added expensive, the increased of the ratio of W/C is reduced dry-shrinkage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.369-374
• /
• 1997

This study is the experimental results on the flowing properties of the super flowing concrete (SFC) using limestone (LS), which is to develop the SFC in level of ordinary strength. And this study is described with respect to basic concept, confined water ratio ($\beta_p$) of binder (cement+limestone) in paste, relationship between volume ratio of water-binder (w/b) and addition ratio of superplasticizer in mortar, flowing velocity and funneling time and compressive strength in concrete to replacement ratio of LS. The results of this study is improved to flowing properties in fleshly concrete with increasing replacement ratio of LS. The optimal mixing condition of the SFC using LS in level of ordinary strength is proved W/C 55%, LS 40% and W/C 60%, LS 50%.