• Fisheries and Aquatic Sciences
• /
• 제17권4호
• /
• pp.449-454
• /
• 2014

The effects of food deprivation and feeding ratio on the growth, feed utilization and body composition of juvenile olive flounder Paralichthys olivaceus were investigated in 810 juvenile fish averaging 6.4 g in weight randomly distributed in 27 400-L flow-through tanks. A 3 [food deprivation: 8-week feeding without food deprivation (8W), 7-week feeding after 1-week food deprivation (7W) and 6-week feeding after 2-week food deprivation (6W)]${\time}3$ (feeding ratio: 100%, 95% and 90% of satiation, hereafter denoted by 100, 95 and 90, respectively) factorial design was applied. The weight gain of the fish was significantly affected by both food deprivation and feeding ratio. The weight gain of the fish under the 8W-100 treatment was higher than that of those under the 7W-95, 7W-90, 6W-100, 6W-95 and 6W-90 treatments, but did not differ from those of fish under the 8W-95, 8W-90 and 7W-100 treatments. The specific growth rate (SGR) and the feed intake of the fish were affected by both food deprivation and feeding ratio. However, the feed conversion ratio (FCR) was unaffected by both food deprivation and feeding ratio. The protein efficiency ratio (PER) was affected by the feeding ratio, but not by food deprivation. The protein retention (PR) was affected by food deprivation, but not by feeding ratio. Juvenile olive flounder subjected to 1-week food deprivation at 100% satiation (7W-100 treatment) achieved full compensatory growth.

• 대한치과기공학회지
• /
• 제18권1호
• /
• pp.67-72
• /
• 1996

This test is verifying for influence of W/P ratio of investment upon dental prosthesis Firstly we made 40 MOD die and divide 4 groups, each group take 0.2 different w/p ratio grade such as 0.35, 0.37, 0.39 and 0.41. The method of data analysis applied were by ANOVA, Tukey test and Mann-Whiney and Kruskal Wallis test. The finding of this study were as follows : 1. The 0.37 w/p ratio group showed most accurte margin due to $15.8{\mu}m$ gap between margin and die which keep up with manufacture's instruction and 0.35 w/p ratio group was followed as second accuracy group o 새 $48.3{\mu}m$ gap between margin and die, 0.39 w/p ratio group showed $101{\mu}m$ gap and 0.41 w/p ratio group showed $129.8{\mu}m$ gap. 2. As to the relationship of the margin accuracy between 4 different grade of w/p ratio groups, each group was statistically significant(P<0.01). Also the all groups were statistically significant except between 0.35 and 0.37 groups between 0.39 and 0.41 groups, and between 0.35 and 0.39 groups. 3. A consequence of Mann-Whitney & Kruskal-Wallis test for marginal accuracy between 4 different grade of w/p ratio was statistically significant as same as above ANOVA test result. Also Tukey test for verifying similarity from each group showed same as above.

• 한국실내디자인학회논문집
• /
• 제41호
• /
• pp.104-111
• /
• 2003

Most residential buildings in Korea are preferred to have maximum interior spaces, rather than consider its original design, overall building performance, and any other aspects since early 1990's. Especially in high-rise apartment buildings, balcony has been merged to living room to get more interior spaces and this renovation trends have been producing deep and narrow shapes of living rooms that was not initially intended by architects. On the other hand, the same gross area of each unit does not necessarily mean same width and depth ratio of each residential unit. Generally, we can categorize it to the deep or wide unit based on its width and depth ratio. Under these circumstances, this study analyzes the room usage pattern changes based on the space width and depth ratio and the effect of expansion of room space to the balcony. This study also includes about 180 apartments plan case studies to find out the relationships among w/d ratio changes, furniture arrangement types, and room configurations. In this research, general apartment room w/d ratios are 0.97 ∼ 1.23; 0.7(south facing sitting room), 1.23(south facing bed room), and 0.95(north facing bedroom). But, after expanding room space to balcony w/d ratio increased as follows; sitting room become 1.31, general south facing bedroom become 1.23, and north facing bedroom become 1.45. In addition to user preference of w/d ratio, many people prefer rectangular room shape a little(w/d ratio is 0.9 or 1.2) than square style (w/d ratio is 1.0) or very deep room style (w/d ratio Is more over 1.5). Accordingly, expanding the room space to balcony may make unsatisfactory room w/d ratio. Expanding room space to balcony should be considered by existing room w/d ratio.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.369-372
• /
• 2008

본 연구는 프리믹스 시멘트를 사용한 고강도 콘크리트의 참고배합 제안에 관련한 것으로서 W/B변화에 따른 고강도 콘크리트의 기초적 특성을 분석하였다. 실험결과 목표 슬럼프 플로우 및 목표 공기량 확보를 위한 고성능감수제 및 AE제의 사용량은 W/B가 증가할수록 감소하는 것으로 나타났고, W/B 변화에 따른 응결시간은 W/B 20%를 제외한 여타의 배합의 경우 W/B가 커질 수록 지연되는 것으로 나타났다. W/B 변화에 따른 압축강도는 W/B가 증가할 수록 저하하였고, 목표 슬럼프플로우 변화에 따라서는 큰 차이가 없는 것으로 나타났다. 한편, B/W와 압축강도의 관계를 회귀식으로 나타낸 결과 상관계수 0.9646으로 높게 나타나 실제 실무 활용이 가능할 것으로 판단된다.

• 대한치과보철학회지
• /
• 제16권1호
• /
• pp.45-47
• /
• 1978

We use investment to retain the mould of the wax pattern in making dental metal castings. A fin on the metal casting is occasionally formed due to several factors. The factors making the fin are improper burn out time and temperature, improper W/P ratio of investment and lining of asbestos in casting ring. The purpose of this study is to investigate the effect of W/P ratio of investment on the fin formation. Except the W/P ratio of investment which used to invest the wax pattern, the study was done under same condition; burn out time and temperature, W/P ratio of refractory cast(W/P=0.12) and asbestos lining in casting ring. The obtained result is that the fin is more likely to be formed on the casting which invested with higher W/P ratio of investment to that of refractory cast.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권5호
• /
• pp.77-86
• /
• 2013

본 연구는 물-결합재 비 (W/B)와 잔골재-결합재 비 (F/B)에 따른 알칼리 활성화 슬래그 시멘트 (AASC)의 기초 특성에 관한 연구이다. W/B 비는 0.35, 0.40, 0.45, 그리고 0.50를 선정하였다. 그리고 F/B 비는 1.00에서 3.00까지 0.25 크기로 고려하였다. 알칼리 활성화제는 2M과 4M의 NaOH를 사용하였다. 실험은 플로우, 흡수율, 압축강도, 초음파 속도 그리고 건조수축을 측정하여 비교하였다. 플로우, 압축강도, 흡수율, 초음파 속도 그리고 건조수축 모두 W/B 비가 증가하면 감소하였다. 압축강도는 동일 W/B 비에서 F/B 비가 증가할수록 감소하였다. 또한 특정 F/B 비에서 강도가 증가하는 것을 볼 수 있었다. 그리고 S2 (river sand 2)는 S1 (river sand 1)보다 낮은 물리적 특성을 나타냈는데, 이는 조립률 때문으로 판단된다. 본 실험의 결과 AASC의 공학적 특성은 W/B 비와 F/B 비가 영향을 주는 것으로 판단된다. 최적의 F/B 비는 각 W/B 비에 대해 1.75~2.50 인 것으로 생각된다. 또한 W/(B+F) 비가 0.13과 0.14 사이일 때 AASC 모르타르의 배합설계가 효과적일 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.130-135
• /
• 1995

We can consider that the study on early evaluation of strength of concrete is useful to raise safety of building and utility of quality control of concrete is useful to raise safety of building and utility of quality control of concrete. In this paper, was proposed to method early to predict strength of concrete with key parameters, such as Water/Cement(W/C) ratio and Sand / Aggregate(S/A) ratio. Through a series of experiment, the obtained results are summarized as follow. $\circled1$ The ratio of resistance was decteased as the increase of W/C ratio. $\circled2$ The maximum value for the ratio of resistance and compressive strength was presented in the case of 40% S/A ratio. $\circled3$ The relationship. of the ratio of resistance and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28}=-0.00104R^2 + 2.263R - 935.5$ (W/C Ratio) $F_{28} = 0.007R^2 - 10.693R - 4269.1$ (S/A Ratio)

• 음성과학
• /
• 제9권1호
• /
• pp.193-206
• /
• 2002

The aim of this study is to find out how the labiovelar onglide /w/ in English kwV sequences that have minimal pairs with kV sequences is pronounced differently among Korean EFL learners based on acoustic evidence. This study tries to identify /w/ sound in English kwV sequences through spectrograms and to examine the duration ratios of each segment in kwV words to compare the patterns of an English native speaker with those of Korean speakers of English. In spectrographic analyses, the complete deletion of /w/ and partial pronunciation of /w/ dubbed [$k^{w}$] were identified as well as the targetappropriate production of /w/. The general production patterns with respect to the duration ratios in English [kw] sequence words showed that the subjects who produced /w/ had similar ratio patterns that the native speaker had in that the vowel duration ratio in kwV sequences was shorter than that in kV sequences. By contrast, the subjects who deleted [w] had a long ratio of the onset [$k^{h}$] while the speaker with a partial pronunciation of /w/ had a long ratio of the following vowel.

• 한국분말재료학회지
• /
• 제5권1호
• /
• pp.42-49
• /
• 1998

A study on the improvement of the impact energy in 93W heavy alloy with a Ni/Fe ratio of 9/1 has been carried out as a function of heat treatment temperature. The obtained results were compared to that of the traditional alloy system in which the Ni/Fe ratio is 7/3 or 8/2. With increasing heat treatment temperature from 1150 to 125$0^{\circ}C$, the impact energy of the alloy with the Ni/Fe ratio of 9/1 is remarkably increased from 42 to 72 J, which is higher than that of traditional alloy, up to 118$0^{\circ}C$ and then saturated. Fracture mode was also changed from brittle W/W boundary failure to W cleavage. The temperature showing the dramatic shrinkage by dilatometric anaysis of the heavy alloy with Ni/Fe ratio of 9/1 was found to be 1483 $^{\circ}C$, which is higher than that (146$0^{\circ}C$) of the heavy alloy with Ni/Fe ratio of 7/3. Auger Electron Spectroscopy showed that the segregation of impurities, such as S, P, and C in W/W grain boundary was considerably decreased with increasing heat treatment temperature from 1150 to l18$0^{\circ}C$. From the above results, it was found that the impurity segregation in W/W grain boundary played an important role on the decrease of impact properties, and the heat treatment temperature should be appropriately chosen, as considering the Ni/Fe ratio of the alloy, in order to get good impact properties.

• 한국정보전자통신기술학회논문지
• /
• 제15권3호
• /
• pp.198-204
• /
• 2022

본 논문에서는 ANSYS 유동해석 시뮬레이션 프로그램을 이용하여 5kW와 50kW 수직축 풍력터빈에 대해 연구였다. 5kW급 수직축 풍력터빈은 주 블레이드의 갯수와 보조 블레이드의 개수를 각각 30개로 하였고 주속비(TSR)를 0.2에서 06까지 변화를 주면서 전기적 특성을 분석하였다. 5kW급 수직축 풍력터빈의 전기적 특성을 기초로 하여 50kW급 수직축 풍력터빈을 설계 하였다. 5kW급 풍력발전은 주속비가 0.5일 때 9.5kW의 출력과 0.28의 효율이 최대로 나타났다. 출력전류(I_p)와 출력전압(E_p)을 계산한 결과, 주속비가 증가하면 출력전류(I_p)는 감소되고 출력전압(E_p)은 증가되는 것을 알 수가 있었다. 그리고 주속비를 변화주어도 5kW급 풍력발전은 5kW 이상 출력이 측정되었다. 주속비를 0.3부터 0.6까지 변화시켰을 때, 50kW급 풍력발전은 50kW 이상 출력되었다. 50kW급 풍력발전은 주속비가 0.4일 때, 출력은 58.37[kW]이고 효율은 0.318로 최대로 나타났으며, 제안한 50kW 풍력발전이 설계조건을 만족함을 확인하였다.