• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.943-944
• /
• 2009

본 논문은 임의의 호스트의 실행 환경과 리소스에 대한 변경 없이 독립적으로 응용 프로그램 수준의 가상화를 제공하는 단일 실행 파일을 가지는 이동형 SW의 제공 방법에 대하여 소개한다. 이는 실행 포맷 변환기를 통하여 설치형 SW에서 추출된 이동형 SW 정보를 본 논문에서 제공하는 응용 파일 시스템에 구축하고, 이를 실행하기 위하여 윈도우 기반 시스템에서 사용자 레벨의 라이브러리 후킹 기술을 이용한 가상 실행 라이브러리와, 이 가상 실행 라이브러리를 실제 구동되는 이동형 SW 프로세스에 바인딩하여 실행시키게 하는 실행 엔진 모두를 하나의 파일에 제공하는 방법 대하여 기술한다

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.27-32
• /
• 2018

In this paper, W-band transceiver module for compact radar has been designed and fabricated. Utilizing proposed microstrip-to-waveguide transition, the error between design and implementation is reduced. The proposed transition provides less than 1 dB insertion loss per transition and reliability for fabrication. In order to apply compact radar with dual-polarized monopulse directly, W-band transmitter with 28 dBm output power is designed and developed. Also, 6 channels of receiver module with low noise figure 13.5 dB and maximum 17 dBm input P1dB is developed. Proposed W-band transceiver module is expected compact radar application for dual-polarized monopulse signal processing system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1391-1401
• /
• 2007

This paper proposed a novel broadband printed monopole antenna for PCS/IMT-2000/WLAN terminals. Frequency characteristics are optimized with various design parameters. Two Z-shaped patchs were utilized in order to improve the characteristics of a printed monopole antenna which usually has a narrow bandwidth. The bandwidth of the realized antenna is $1.590{\sim}2.614$ GHz(48.43 %) below the return loss of -10 dB which contain the required bandwidth of PCS/IMT-2000/WLAN band. The simulated and measured values of 1 g and 10 g averaged peak SAR on human head caused by the proposed antenna on folder-type phone were analyzed and discussed. As a result, the measured 1 g peak SAR value is 0.794 W/kg and 10 g peak SAR value is 0.368 W/kg at 1.8 GHz. The results are smaller than the reference SAR limit values that are respectively 1.6 W/kg and 2 W/kg on 1 g and 10 g averaged SAR values.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.435-438
• /
• 2010

오늘날 많은 연구자들은 자율적 인간형 로봇 (Autonomous symbiotic human-robot)을 보조하기 위한 지식체계로 온톨로지의 개념을 사용한다. 이러한 연구는 룰 기반의 추론시스템을 지원하기 위해 온톨로지를 저장하는 데이터베이스 스키마를 설계하는데 초점을 맞추고 있다. 이러한 연구 뿐만 아니라 온톨로지 개념을 사용하는 가장 중요한 목적 중에 하나는 상황 추론이다. 이러한 관점에서 본 논문은 로봇이라는 환경에서 좀 더 지능적인 상황 추론 서비스를 제공하기 위해, 5W1H 기반의 로봇 지능 저장소라 불리는 로봇 메모리 저장소를 설계하는데 초점을 두고 있다. 기존 연구는 체계적이고 의미론적 5W1H를 고려하지 않거나 5W1H와 다른 개념 사이의 연광성의 결여에 많은 문제점을 가지고 있으며 이를 해결하기 위해 본 논문에서는 상황, 목적, 공간, 특징, 인간 그리고 5W1H의 온톨로지 지식을 저장할 수 있는 개념적인 모델인 로봇 메모리 모델을 설계한다. 또한 본 논문에서는 상황 추론을 지원하기 위해 로봇의 인스턴스 정보라고 불리는 자전적 기억 (Episodic Memory)를 효과적으로 저장하기 위한 5W1H 모델을 정의하며 이러한 모델을 물리적으로 저장하기 위한 관계형 데이터베이스 기반의 EventsEpisodicRBS를 설계한다. 결과적으로 이러한 연구를 통해서 자율적 인간형 로봇 환경에서 로봇이 지능적 서비스 제공의 핵심 모듈인 상황 추론을 지원하는데 큰 기여를 할 수 있는 하부 시스템으로서의 의미를 가질 수 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.11
• /
• pp.8-16
• /
• 2000

In this paper, on calculating SARs on human head using computer simulation, SARs caused by PCS handsets are calculated and compared, and the design parameters that affect SAR values are analyzed. Is and 10 g peak averaged SARs are calculated as the type of antenna, the location of antenna, and the type of handset are changed and SAR distributions as depth of human head are shown. Among the antennas on flip type handsets, side mounted PIFA has the lowest SARs 1g and 10g peak averaged SARs are 0.686W/kg and 0.353W/kg. The SARs caused by monopole antenna on folder type handset are 1.133W/kg and 0.709W/kg. and are about 30% lower than monopole 1.759W/kg and 0.978W/kg, respectively. SAR distributions as depth of human head of side mounted PIFA and monopole antenna on folder-type handset are more slowly changed than those of top mounted PIFA and monopole antenna on flip-type handset.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.475-488
• /
• 2018

This study evaluates geothermal system efficiency in terms of input power and heat exchange volume on the heat-source and load sides, by applying a combined open-closed type loop system comprising a geothermal system and a groundwater well to a cultivation site. In addition, this study analyzes the effects of heating and cooling for a complex geothermal system, by evaluating the temperatures of an external site and a cultivation site during operation. During cooling operations the heat exchange volume on the heat source side, average 90.0kW/h for an open type system with an input of 235L/minute groundwater, and 40.1kW/h for a closed type system with an input of 85L/minute circulating water, for a total average heat exchange volume of 130.1kW/h. The actual heat exchange volume delivered on the load side averages 110.4kW/h. The average EER by analysis of the geothermal system's cooling efficiency is 5.63. During heating operation analysis, the heat exchange volume on the heat source side, average 60.4kW/h in an open type system with an input of 266L/minute groundwater, and 22.4kW/h in closed type system with an input of 86L/minute circulating water, for a total average heat exchange volume of 82.9kW/h. The actual heat exchange volume delivered on the load side averages 112.0kW/h in our analysis. The average COP determined by analysis of the geothermal system's heating efficiency is 3.92. Aa a result of the tradeoff between the outside temperature and the inside temperature of the production facility and comparing the facility design with a combined well and open-closed loops geothermal(CWG) system, we determine that the 30RT-volume CWG system temperature are lower by $3.4^{\circ}C$, $6.8^{\circ}C$, $10.1^{\circ}C$ and $13.4^{\circ}C$ for ouside temperature is of $20^{\circ}C$, $25^{\circ}C$, $30^{\circ}C$ and $35^{\circ}C$, respectively. Based on these results, a summer cooling effect of about $10^{\circ}C$ is expected relative to a facility without a CWG system as the outside temperature is generally ${\geq}30^{\circ}C$. Our results suggest that a complex geothermal system provides improvement under a variety of conditions even when heating conditions in winter are considered. Thus It is expected that the heating-cooling tradeoffs of complex geothermal system are improved by using water screen.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2393-2400
• /
• 2013

This research presents an experimental study of heat exchange rate of U, W, 2U and coil type ground heat exchangers (GHEs) measured by thermal performance tests (TPTs). The four types of GHEs were installed in a partially saturated dredged soil deposit of Incheon International Airport area. Thermal response tests (TRTs) were conducted for U, W and 2U type GHEs to deduce the ground thermal conductivity. Besides, TPTs were also conducted for U, W, 2U and coil type GHEs to evaluate heat exchanger rates under 100-hr continuous and 8-hr intermittent operation conditions for five days. Coil shaped GHE showed about twice higher thermal performance than the others GHEs. Furthermore, intermittent operation condition showed 30~40% higher heat exchange rates than continuous operation condition.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.11a
• /
• pp.193-202
• /
• 2007

본 연구는 최근 물류 활동 전반에 걸쳐 무선주파수를 이용해 상품과 사물에 내장된 정보를 읽어내는 기술인 RFID(Radio Frequency IDentification) 응용기술과 유비쿼터스 환경에서의 POS(POS : point of sales) 시스템의 발전 형태를 예측하여, 향후 국내 외 대형 할인점에서 적용할 수 있는 RFID 기반의 이동형 u-POS 시스템의 핵심기술개발에 관한 연구이다. 본 연구는 RFID 기반의 이동형 u-POS 시스템의 핵심기술을 크게 H/W와 S/W로 구분하여 H/W 측면으로는 기존의 쇼핑 Cart를 대체 할 수 있는 u-Cart 개발을 목표로 하고, S/W 측면으로는 기존의 POS 시스템과 연동 할 수 있는 u-Cart의 클라이언트 어플리케이션과 매장관리 서비스 모듈의 개발을 목표로 한 내용에 대하여 발표하고자 한다.

• Food Science and Preservation
• /
• v.9 no.3
• /
• pp.315-320
• /
• 2002

In order to improve some problems such as contamination of undesirable mold, mycotoxin production and excessive drying on the surface of traditional meju. Control meju without koji and capsule type meju(CM) coated with soybean mixture containing 0.5%, 1% and 2%(w/w) R. oligosporus koji were dried at room temperature (10∼15$^{\circ}C$) for 3 days. Control meju I was fermented in outdoor for 27 days. Control meju IIand CMs were fermented in Korean yellow clay room at 25$^{\circ}C$ for 7 days under 80% relative humidity as first step, and then fermented in outdoor (average temp. 2.7$^{\circ}C$, December) for 20 days as second step. The moisture content of CMs were higher than that of control meju I to the range of 2.88∼7.55%(w/w). pH and titratable acidity in CMs were similar to control group. Amino type nitrogen content in CMs(800.80, 816.0, 901.60 mg%) were 2.2∼2.6 times higher than that in control meju I (347.2 mg%). Reducing sugar content in CMs(2.78∼3.13%) was similar to control meiu I (2.10%) and control meju H(2.31%). Lightness(L) value of control meju I was higher than that of control meju IIand CMs.

• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.197-203
• /
• 2008

This study was performed to check the structural safety of modified 1-2W Greenhouses to be utilized fur growing Paprika. This type of greenhouse was derived from being remodeled by enhancing the column height of conventional 1-2W type greenhouses. According to the results of structural analysis performed by SAP-2000, there was not significant change in critical snow depth in spite of increasing the column height of 1.2 m by welding. But the critical wind velocities were shown to be $26.0\sim4l.0m/s$, which were $3\sim18%$ lower wind velocities compared with those critical velocities estimated for typical type of 1-2W greenhouse. Under the wind loads, those maximum section forces such as shear force, axial force, and bending moment, together with the deformed frame shape of strained greenhouse, were almost similar in both typical type and modified type. Maximum bending moment of column was found at eave's height of column on windward side. Under the snow loads, those maximum section forces such as shear farce, axial force, and bending moment, together with the deformed frame shape of strained greenhouse, were almost similar in both typical type and modified type. Maximum section forces except axial force was found at eave's height of column. Maximum axial force was found at inner column. Soil bearing capacity together with the total foundation resistance against wind upheaval was found to be consistently safe enough to resist to both wind load and snow load.