• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on loon temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge, the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains (CH$_3$) and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• Advances in materials Research
• /
• 제3권3호
• /
• pp.175-183
• /
• 2014

Natural rubber bound phenolic antioxidant, 2,6-di-tert-butyl-4-vinylphenol (2,6-DBVP), was prepared from natural rubber and 2,6-DBVP in both solution and melt state. The 2,6-DBVP had been synthesized from 3,5-di-tert-butyl-4-hydroxybenzaldehyde and methyltriphenylphosphonium iodide ($MePPh_3I$) by Wittig reaction ($0^{\circ}C$ for 2 hrs, $N_2$ atmosphere). The conditions for preparation of natural rubber bound 2,6-DBVP (NR-DBVP) were optimized for both solution state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 2 hrs) and for melt state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 10 mins, with rotor speed of 60 rpm). A thermoplastic vulcanizate was obtained using a compatibilizer, polypropylene modified with phenolic resin (PhHRJ-PP), in a closed mixer ($180^{\circ}C$ for 3 mins, rotor speed 60 rpm). The antioxidant properties of vulcanized NR-DBVP, using phenolic as the vulcanization system, were similar to NR with the conventional antioxidant BHT. In addition, the antioxidant, water leaching property of the thermoplastic vulcanizate of NR-DBVP/PP were good in comparison to a NR blend with BHT; the morphologies of these thermoplastic vulcanizates were similar.

• Elastomers and Composites
• /
• 제36권2호
• /
• pp.121-129
• /
• 2001

다양한 조건 하에서 고무판의 마찰계수를 폭정하기 위하여 수직하중, 미끄럼속도, 경도, 윤활 조건 및 고무판 두께 등을 변화시켜가면서 시험을 실시하였다. 시험에 사용된 고무판의 재질은 천연고무이며, 상대 부품은 강구를 사용하였다. 수직하중과 미끄럼속도는 마찰계수에 현저한 영향을 미치지 않았으며, 고무판의 경도가 높아지고 고무판의 두께가 얇아질수록 마찰계수는 감소하였다. 무윤활 시 마찰계수는 큰 편차를 보였으나, 오일 윤활인 경우 다른 조건에 관계없이 안정된 값을 나타내었다.

• Elastomers and Composites
• /
• 제34권2호
• /
• pp.121-127
• /
• 1999

스티렌-부타디엔 고무(styrene-butadiene rubber :SBR)의 가공성과 기계적 물성을 조절하는 방안의 일환으로, 고분자량 SBR(high molecular weight SBR : HM-SBR)과 저분자량 SBR (low molecular weight SBR : LM-SBR)의 혼합물의 특성을 조사하였다. HM-SBR/LM-SBR의 LM-SBR 함량이 증가함에 따라 경화전 혼합물의 Mooney 점도와 경화에 따른 토오크 증가치는 감소하고 가황 후 혼합물들의 Shore A 경도와 반발탄성율은 감소를 보였다. 또한 LM-SBR 함량의 증가에 따라 혼합물들의 가황 후 유리전이온도는 일정하지만 고무상태에서 tan ${\delta}$는 증가를 보였다. LM-SBR 함량에 따른 가황 전 혼합물들의 Mooney 점도 감소는 LM-SBR의 가소화 효과와 분자량 분포 증가에 기인하는 것으로 해석하였다. 가황 HM-SBR/LM-SBR 혼합물의 기계적 물성 변화는 고무 혼합물의 가교밀도 감소에 기인하는 것으로 판단되었다.

• Elastomers and Composites
• /
• 제33권4호
• /
• pp.246-254
• /
• 1998

Styrene butadiene rubber (SBR)/ 카렬블랙 복합체의 전기저항 특성과 전기전도 특성을 연구하기 위하여 표면저항, 체적저항, point to point 저항, 정전하 소멸시간 및 전기전도 실험을 4종의 카본블랙을 사용하여 실시하였다. 약 50phr의 카본블랙이 첨가되었을 때, 모든 저항값이 급격히 감소하는 임계영역 (Rc)을 나타내었다. 카본블랙이 첨가된 SBR 복합체의 전류밀도는 전기장의 증가에 따라 증가하며, 기울기 (dJ/dE)가 증가하는 임계점 (Pc)이 존재하였으며, 이때의 전기전도기구는 임계점을 기준으로 하여 낮은 전기장 영역에서는 ohmic 전도, 높은 전기장 영역에서는 공간전하 제한전도임을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.15-17
• /
• 2001

A new possibility of our atmospheric cold plasma torch has been examined on the surface treatment of an air-exposed vulcanized rubber compound. The plasma treatment effect was evaluated by the bondability with another rubber compound using a polyurethane adhesive.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제12C권4호
• /
• pp.214-219
• /
• 2002

The influence of ultraviolet (UV) irradiation and corona on the surface degradation of high temperature vulcanized (HTV) silicone rubber used for outdoor insulation through measuring surface voltage decay after corona charging, surface resistivity, contact angle and X-ray photoelectron spectroscopy (XPS) analysis was studied. The surface resistivity calculated by the surface voltage decay was compared with a value directly obtained from the three electrode method having the guard ring electrode. A good agreement between the two methods for surface resistivity was obtained. UV treated specimens showed the slower decrease of surface voltage decay, while the corona exposed specimens showed a dramatically faster decrease. Although both artificial treatments cause the same oxidative products, which was confirmed with XPS, we could distinguish the difference between the reactions of the two treatments by monitoring the surface voltage decay on corona-charged specimen. In addition, we could derive the specific surface states of the silicone rubber treated by accelerated artificial aging factors and the degradation process.

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.678-686
• /
• 2002

This paper presents the effects of accumulation of surface charges on hydrophobic level and the changes of surface potential decay with various artificial environment treatments on high temperature vulcanized (HTV) silicone rubber used for outdoor insulating material. For this study, the charging apparatus by corona discharge, in which grid electrode was installed between the main corona and ground electrode, was used. From this study, it was found that the accumulation of surface charges above a critical surface potential on silicone insulating materials could lead to the temporary loss of surface hydrophobicity. In addition, corona stress and water absorption stress increase the decay rate of surface charges of HTV silicone rubber, while ultraviolet (UV) stress causes longer decay time. We could conclude that the effects of surface charges on hydrophobicity level and the changes of surface state by various artificial treatments were found through a trend of surface potential decay.

• Elastomers and Composites
• /
• 제1권1호
• /
• pp.56-62
• /
• 1966

The aging characteristics of vulcanized rubber products manufactured in Korean industries have been studied, especially in terms of relationship between aging temperature and time, and also the comparison of results between Geer's oven testing and tube testing was made. It was assessed from changes in tensile properties resulting from conditioning at elevated temperatures for specified period of time. Even though the recipe of each sample is different, the results, as would be expected, has shown that at lower aging temperature the change of tensile strength indicate moderately and at the elovated severely as shown in Figure 9. Consequently, in spite of that the results from conditioning at various temperatures for certain specified period of time must be equivalent to each other, it shows inignorable tolerance. The results of Geer's oven test and tube test have shown slightly different value. It seemed to be caused by the result of migration phenomena on aging in Geer's oven.

• 항공우주시스템공학회지
• /
• 제7권4호
• /
• pp.36-41
• /
• 2013

In order to improve incombustibility of EPDM(Ethylene propylene diene monomer)-based rubber, inorganic materials as $Al(OH)_3$ and $Sb_2O_3$ were added. The mechanical and thermal properties have been measured for vulcanized rubber loaded with different concentrations of $Al(OH)_3$ and $Sb_2O_3$. As inorganic material contents increases from 5phr to 30phr, the specific gravity and hardness increase while elongation at break decreases. This study performed incombustibility test and thermal analysis through TGA(Thermogravimetric Analyzer). As a results, incombustible and thermal properties of EPDM-based rubber were improved as $Al(OH)_3$ and $Sb_2O_3$ contents increase.