• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.164-169
• /
• 1998

Vulcanized rubber containing three kinds of oligomeric resins such as cashew resin, t-octylphenol formaldehyde resin and terpene modified wood rosin has been characterized by simultaneous pyrolysis methylation-gas chromatography/mass spectrometry (SPM-GC/MS). After methylation by the SPM method using tetramethylammonium hydroxide, the methylated pyrolyzates of the corresponding resins were detected with higher sensitivity than underivatized pyrolyzates without any interferences from other ingredients of vulcanized rubber.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.181-190
• /
• 2004

The interest of the fatigue life of rubber components such as engine mounts is increasing according to the extension of warranty period of the automotive components. Automotive engine mounts get damaged due to thermal and mechanical loadings. This paper discusses a fatigue life prediction of the 3-dimensional dumbbell specimens for natural rubber compound considering the effects of maximum strain and heat aging temperature. Displacement controlled fatigue life tests were performed using specimens with different levels of maximum strain and various hardness. The basic mechanical properties test and the fatigue test of aged rubber specimen under normal and elevated temperature were executed. A procedure to predicted the fatigue life of vulcanized natural rubber material based on the maximum strain method was proposed, and then this curve was in good agreement with fatigue test data less than 200% error range.

• 한국광학회지
• /
• 제13권4호
• /
• pp.332-335
• /
• 2002

가류고무의 접착력을 향상시키기 위해서 엑시머 펄스 레이저 광으로 표면처리를 하였다. 레이저 광 조사 수의 증가에 따라, 접착력은 크게 향상되어, 100회의 조사 수에서 1500 N/m의 가장 큰 값을 얻었다. 또한 에너지 밀도 증가에 대해서도 접착력은 증가하여 에너지 밀도 176 mJ/$cm^{2}$에서 가장 큰 접착력 1500 N/m를 얻게 되었다. 에너지 밀도의 증가에 따라 접착력이 증가하는 것은 표면적의 증가와 관련이 있음을 알았다.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.540-543
• /
• 2004

Surface treatment using an excimer pulse laser beam has been conducted in order to increase the adhesive strength of vulcanized rubber. The adhesive strength increased with increasing the number of irradiation time with laser pulses and reached to 1,500 N/m after 100 cycles of irradiation. Increased in energy density was directly proportional to the improvement of the adhesive strength. Maximum value of the adhesive strength of 1,500 N/m obtained at the energy density of 176 mJ/$\textrm{cm}^2$. We conclude that an increased energy density improves in both the surface area and adhesive strength.

• Elastomers and Composites
• /
• 제18권2호
• /
• pp.51-59
• /
• 1983

고분자물질의 유전특성은 고분자의 분자구조를 연구하는데 대단히 중요하다. 황가황에 의한 천연고무의 유전흡수특성을 25[$^{\circ}C$]의 온도에서 주파수영역 10[KHz]부터 32[KHz] 사이에서 연구하였는데, 결과로서 황 4phr 이하의 가황 천연고무에서는 계면분극과 쌍극자 분극에 의한 두종류의 유전손실이 나타났고 황 7phr 이상의 가황 천연고무에서는 쌍극자분극에 의한 손실만이 존재함을 확인하였다. 더욱이 황의 증가로 저주파수쪽으로 이동되는 유전 손실스펙트럼의 최대치 $tan{\delta}$는 황에 의해 변화되며 체적고유저항은 황의 첨가와는 무관하였고 그 크기는 $10^{7}{\sim}10^{11}[{\Omega}{\cdot}cm}]$이였다.

• 한국전기전자재료학회논문지
• /
• 제18권8호
• /
• pp.696-701
• /
• 2005

This paper was investigated the changes of surface properties of high-temperature-vulcanized (HTV) semiconductive silicone rubber due to oxygen plasma discharge. The modifications produced on the silicone rubber surface by oxygen plasma were accessed using Fourier transform infrared spectroscopy(FTIR), X-ray photoelectron spectroscopy(XPS), contact angle and Surface Roughness Tester. The results of the chemical analysis Showed that C-H bonds were broken due to plasma discharge and Silica-like bonds (SiOx, x=$3\~4$) increased. It is thought that the above changes lead to the increase of surface energy of high-temperature-vulcanized (HTV) semiconductive silicone rubber also, Surface roughness was increased with cleavage of side-chains and oxidation process, it confirmed change as the SEM. The micromorphology of surface and hydrophobicity due to plasma discharge based on our results were discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.69-78
• /
• 2012

본 연구는 콘크리트 지하구조물 외부에 적용하는 방수공법으로 120일 후 가황되도록 가황제, 가황조제 등을 첨가하여 배합제조된 합성고무시트 방수재로써 약 85일의 delay time과 약 35일의 curing time을 가지며, 이때 인장강도는 약 692%가 증가하고, 신장률은 약 10% 감소하여, 일반시트의 시공시 단점을 미가황상태로 시공되어 보완하고, 상온에서 가황하여 내구성능을 확보할 수 있는 것으로 나타났다. 또한 가황직후 및 가황 1년 후의 각종 열화요인에 대한 내구성능을 평가한 결과 관련 품질기준을 만족하며, 미가황 상태에서의 합성고무 시트에 보호모르타르를 시공하여 접착성능을 평가한 결과 첨가된 실리케이트에 의하여 보호모르타르와 수화반응에 의한 양호한 부착성능이 확보되는 것으로 나타났다.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.49-54
• /
• 2015

Dynamically vulcanized PMMA/ACM (80 wt%/20 wt%) blend using DCP as a curing agent was prepared using internal mixer. The morphology, mechanical properties, optical properties, melt viscosity and die swell were characterized by using FE-SEM, tensile test, Izod impact test, dynamic mechanical analysis, ARES and capillary rheometer, respectively. The blends show a phase-separated morphology in which ACM are dispersed in PMMA matrix. Dynamically vulcanized blend exhibits higher mechanical properties, higher melt viscosity, and die swell as compared to simple blend. And, the dynamically vulcanized blend showed total transmittance of more than 75% and haze of higher than 90%, which enable it to find potential applications to fabricate an optical diffuser by extrusion process.

• 대한전기학회논문지
• /
• 제33권3호
• /
• pp.112-117
• /
• 1984

The dielectric propertries of polymers are very important to investigate the molecular structure of polymer. The characteristrics of the dielectric absorption in vulcanized natural rubber were studied in the range of frequency from 10[KHz] to 32[MHz] at the temperature of 25[$^{\circ}C$]. As the results. it has been confirmed that in the case of natural ruber vulcanized between 2 and 4phr the specimens exhibit two kind of dielectric losses due to the dipole polarization by impurites and sulfure, and of above 7phr was only a loss due to the dipole polarization by sulfure and of natural rubber exhibit two kind of losses due to the interfacial and the dipole polarization. Furthermore, dielectric loss maximun tan spectrum, which removed to the low frequency according to increasing sulfure, depends greatly on sulfure. The volume resistivity of $10^{7}$~$10^{11}$[$\Omega\cdot$cm], regardness whether the crosslinking of rubber are tired by sulfure or, was observed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.25-28
• /
• 2005

This paper was investigated the changes of surface properties of high-temperature-vulcanized(HTV) semiconductive silicone rubber due to oxygen plasma discharge. The modifications produced on the silicone surface by oxygen plasma were accessed using x-ray photoelectron spectroscopy(XPS), contact angle and Scanning Electron Microscope(SEM). The results of the chemical analysis showed that C-H bonds were broken due to plasma discharge and Silica-like bonds (SiOx. x=3~4) increased. It is thought that the above changes lead to the increase of surface energy of high-temperature-vulcanized(HTV) semiconductive silicone rubber. The micromorphology of surface and hydrophobicity due to plasma discharge based on our results were discussed.