• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.28-37
• /
• 2004

반응 및 비반응 유동장에서 단일와동의 전개 및 와(渦) 구조 검토를 위해 2 차원 직접 수치모사를 수행하였다. 수치기법으로는 낮은 마하수 근사법이 적용된 예측-교정자법이 적용되었으며, 연소모텔로는 2단계 총괄 반응식이 사용되었다. 반응 및 비반응 유동장에서 단일와동의 거동 비교를 통해, 와동의 전개특성 및 구조는 화학반응으로부터 생성된 열 뿐만 아니라 부력에 의해 생성된 외부 와동에 크게 영향을 받음을 확인하였다. 또한 반응장의 경우에 부피 팽창항, Baroclinic torque항 및 부력항에 의해 와동의 구조가 크게 변화될 수 있음을 알았다.

• 한국환경과학회지
• /
• 제21권11호
• /
• pp.1395-1406
• /
• 2012

The purpose of this study is to analyze the hydraulic characteristics of the ice-harbor fishway by considering its geometrical form and utilize such analysis results as the foundational database to be used when establishing fishways in the future. first of all, the study realizes the same form as an ice-harbor fishway that is currently implemented via a FLOW-3D model and estimated the parameters that were optimal to the numerical mock test. Then, this study analyzed the level of sensitivity of the flow conditions which fluctuated due to the changes in geometrical changes by adjusting the inclination and pocket spacing by using the estimated optimal parameters. As a result, the study arrived at the following conclusions. The vortical velocity increased and had a significant effect on the inclination of the fishway. Furthermore, as the velocity within the vorticity increased due to the narrowed vortical area, it was determined that further studies on vorticities or the determination of the design method for the decrease in vortical velocity were imperative.

• 한국유체기계학회 논문집
• /
• 제7권1호
• /
• pp.36-44
• /
• 2004

Three-dimensional vortical flow and separated flow topology near the casing wall in an axial flow fan having two different tip clearances have been investigated by a Reynolds-averaged Navier-Stokes (RANS) flow simulation. The simulation shows that the tip leakage vortex formed close to the leading edge of the blade tip on suction side grows in the streamwise direction. On the casing wall, a separation line is formed upstream of the leakage vortex center due to the interference between the leakage vortex and main flow. The reverse flow is observed between the separation line and the attachment line generated downstream of the trailing edge, and increased with enlarging tip clearance. The patterns of a leakage velocity vector including a leakage flow rate are also analyzed according to two tip clearances. It is noted that the understanding of the distribution of a limiting streamline on the casing wall is very important to grasp the characteristics of the vortical flow in the axial flow fan.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1996년도 제11회 수중음향학 학술발표회 논문집 11th Underwater Acoustics Symposium Proceedings
• /
• pp.59-62
• /
• 1996

A numerical study of a two-dimensional acoustic field is carride ort for a spinning vortex pair located neat a wall to investigate the effect of the wall from the spinning quadrupole source in unsteady vortical flows. Based on the known incompressible flow field, the perturbed compressible acoustic terms derived from the Euler equations are calculated. Non-reflecting boundary conditions on the free field and the solid boundary conditions are developed for a generalized curvilinear coordinates system to investigate the effect of a curced wall. It is concluded that the sound generated by the quadrupole sources of unsteady vortical flows in the presence of a flat wall or a circular cylinder can be calculated by using the source terms of hydrodynamic flow fluctuations in both near and far acoustic fields simultaneously.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.445-450
• /
• 2011

금속분말을 연소시키기 위한 스월 연소기 설계의 기초단계로써 단일 접선 공급유로를 갖는 스월 혼합챔버를 제작하고 Paticle Image Velocimetry(PIV)를 사용하여 스월 혼합챔버의 내부 유동장 측정실험을 수행하였다. 상온의 공기를 작동유체로 사용하였으며 접선 공급유량이 증가하는 경우의 스월 혼합 챔버 내 축방향 및 접선방향 성분 속도를 획득하였다. 측정된 유동장을 바탕으로 스월유동과 역압력 구배로 인해 발생하는 외부 유입유동간의 혼합특성을 평가 하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 12th Asian Congress of Fluid Mechanics
• /
• pp.76.3-76.3
• /
• 2008

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1994년도 추계학술발표회 초록집
• /
• pp.84-89
• /
• 1994

주유동에 수직으로 분사된 제트 화염의 구조는 이해하기 위하여 화염 길이와 온도를 측정하고 reactive mie scattering 방법을 이용하여 단면 가시화를 실시하였다. 주유동 속도와 제트 분사 속도의 증가에 따라 화염 길이도 함께 증가함을 알 수 있고, 단면 가시화 결과 화염 내부에 존재하는 inner vortical structure는 일반적인 동축제트 화염과 같은 대칭 구조를 갖지 앉고 유동 조건에 따라 inner vortical motion 의 생성 위치가 변화함을 알 수 있다 이는 본 유동장의 특성 중의 하나인 bound vortex와 제트와 주유동이 접하는 상류 면에서 발생하는 rolling-up 의 강도에 좌우됨을 알 수 있다.

• 대한기계학회논문집B
• /
• 제25권7호
• /
• pp.905-914
• /
• 2001

A large eddy simulation(LES) is performed for turbulent flow around a bluff body inside a sudden expansion cylinder chamber, a configuration which resembles a premixed gas turbine combustor. To promote turbulent mixing and to accommodate flame stability, a flame holder is installed inside the combustion chamber. The Smagorinsky model is employed and the calculated Reynolds number is 5,000 based on the bulk velocity and the diameter of the inlet pipe. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The predicted turbulent statistics are evaluated by comparing them with the laser-doppler velocimetry (LDV) measurement data. The agreement of LES with the experimental data is shown to be satisfactory. Emphasis is placed on the time-dependent evolutions of turbulent vortical structure behind the flame holder. The numerical flow visualizations depict the behavior of large-scale vortices. The turbulent mixing process behind the flame holder is analyzed by visualizing the sectional views of vortical structure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.795-798
• /
• 2002

This paper dispicts the vortical flow characteristics over a delta wing using a computational analysis for the purpose of investigating and visualizing the effect of the angle of attack and fee stream velocity on the low-speed delta wing aerodynamics. Computations are applied to the full, 3-dimensional, compressible, Navier-Stokes Equations. In computations, the free stream velocity is changed between 20m/s and 60m/s and the angle of attack of the delta wing is changed between $16^{\circ}\;and\;28^{\circ}$. For the correct prediction of the major features associated with the delta wing vortex flows, various turbulence models are tested. The standard $k-{\varepsilon}$ turbulence model predict well the vertical flows over the delta wing. Computational results are compared with the previous experimental ones. It is found that the present CFD results predict the vortical flow characteristics over the delta wing, and with an increase in the free steam velocity, the leading edge vortex moves outboard and its streangth is increased.

• 대한기계학회논문집B
• /
• 제25권12호
• /
• pp.1861-1868
• /
• 2001

Vortical structures in the near-wake region of a cubic obstacle are studied using numerical simulation. We consider flow between two parallel plates with a cube mounted on one of the plates. In the turbulent near-wake region of the flow, coherent structures such as hairpin vortices are found. Quasi-periodic behavior of the hairpin vortices is noticed; its dimensionless frequency at Re=1,000 is about 0.82 which is consistent with the result of Elavarasan of et al.'s experiment [Fluid Dyn. Research, 2000, 27] although their geometry is somewhat different from on. In the case of Re=3,500, the dimensionless frequency of the hairpin vortex is about 1.60. It is observed that the translating speed of the head of the hairpin vortex is lower than the streamwise mean velocity at that location. In the vicinity of the lower plate downstream of the cube, various length scales are identified thus less coherent. However, it is noticed that the vortical structures become gradually elongated downstream of the new reattachment.