• 콘크리트학회논문집
• /
• 제16권2호
• /
• pp.195-204
• /
• 2004

기존의 다축응력 상태의 콘크리트 크리프 실험으로부터 제안된 푸아송비에 대한 연구결과는 서로 큰 차이를 나타내고 있다. 측정된 변형률로부터 계산된 푸아송비는 작은 실험 오차에 의해서도 매우 민감하며, 이러한 민감성은 푸아송비의 시간에 따른 변화와 응력상태에 따른 경향을 파악하는 데 있어 큰 어려움을 초래한다. 따라서 이러한 연구결과의 불일치를 해결하고 신뢰성 있는 결과를 도출하기 위해서 새로운 분석방법이 요구된다. 이 연구는 다축응력 상태의 크리프 실험결과에 대한 새로운 분석방법으로 미세평면 모델을 적용하였다. 미세평면 상에서 체적과 편차컴플라이언스에 대한 수학적 모델로는 이중지수 법칙을 사용하였다. 체적과 편차성분의 컴플라이언스는 여섯 개의 변수로 구성되며 실험결과를 최적으로 모사하는 변수를 최적화 기법으로부터 구하였다. 여섯 변수에 대한 회귀분석결과로 부터 계산된 푸아송비는 시간에 따라 변화하였다. 또한 시간에 따라 푸아송비가 일정하다는 조건에서 네 변수를 결정하였으며 이 때의 회귀분석결과와 실험 측정값 사이의 오차는 여섯 변수가 사용된 회귀분석결과의 오차에 비해 다소 크게 나타났다. 네 변수에 대한 회귀분석결과로부터 얻은 시간에 따라 일정한 푸아송비는 큰 오차 없이 실제의 구조해석에 유용하게 사용될 수 있을 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.189-198
• /
• 1997

In order to find out the potential of LP gas as a substitute fuel for small fm engine, experiments were carried out with a four-stroke spark-ignition engine which was modified from a kerosene engine mounted on the power tiller. Performance characteristics of kerosene and LP gas engine such as torque, volumetric efficiency fuel consumption rate, brake thermal efficiency, exhaust temperature, and carbon monoxide and hydrocarbon emissions were measured and analyzed under various levels of engine speed and compression ratio. The results were summarized as follows. 1. It showed that forque of LPG engine was 41% lower than that of kerosene engine with the same compression ratio, but LPG engine with compression ratio of 8.5 it was showed similar torque level to kerosene engine with compression ratio of 4.5. 2. Fuel consumption of LPG engine was reduced by about 5.1% and thermal efficiency was improved by about 2% compared with kerosene engine with the same compression ratio. With the incrasing of compression ratio in LPG engine fuel consumption rate decreased and thermal efficiency increased. 3. Exhaust temperature of LPG engine was about 15% lower than that of kerosene engine. Concenrations of emissions from LPG engine was affected insignificantly by compression ratios, and carbon monoxide emissions from the LPG engine was not affected by engine speed so much. The carbon monoxide and hydrocarbon emissions from LPG engine were about 94% and 66% lower than those of kerosene engine, respectively.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.94-110
• /
• 1997

In the present study, a mean torque predictive model has been proposed and experimentally validated. It includes induction air mass model, fuel delivery model and mean production mode. Air induction and fuel delivery model considering dynamic behaviors of air induction and fuel delivery were proposed to predict the air-fuel ratio excursions under transient condition. Torque function model reflects thermal efficiency, volumetric efficiency, friction and effect of spark timing. In the spark timing model, knock limit and acceleration retard are included. Experiments were carried out to validate the simulation model for the step changes of throttle at constant engine speed. The results show reasonable agreements between simulation and experiment at fully warmed condition. Using this model, fueling strategies are varied with fast throttle open and it can predict air-fuel ratio excursion and IMEP.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.85-91
• /
• 2001

LPG has been well known as a clean alternative fuel for vehicles. As a fundamental study on liquid phase LPG injection (hereafter LPLI) system application to heavy-duty engine, engine output and combustion performance were investigated with various operating conditions using a single cylinder engine equipped with the LPLI system. Experimental results revealed that no problems were occurred in application of the LPG fuel to heavy-duty engine, and that volumetric efficiency and engine output, by 10% approximately, were increased with the LPLI system. It was resulted from the decrease of the intake manifold temperature through liquid phase LPG fuel injection. These results provided an advantage in the decrease of the exhaust gas temperature, in the control of knocking phenomena, spark timing and compression ratio. The LPLI engine could normally operated under $\lambda$=1.5 or EGR 30% condition. The optimized swirl ratio for the heavy duty LPG engine was found around R_s$ = 2.0.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.306-311
• /
• 1994

Experimental research was carried out to investigate the confinement effect of concrete specimens confined by interlocking spirals subjected to the concentric axial compressive load. Main variables are the compressive strength of concrete with 2 levels(normal and high strength), the spacing of the spiral reinforcement, the yield strength of the spiral reinforcement with 2 levels and 4 different interlocking lengths. For the same volumetric ratio, the use of interlocking spirals is not as effective as the single spirals, provided that the spirals have the same diameter.

• 한국안전학회지
• /
• 제9권3호
• /
• pp.67-73
• /
• 1994

The gas holdup and volumeteric liquid phase mass transfer coefficient with the variation of the concentration of CMC aqueous solution, gas velocity, diameter and area of the draught tube were investigated. As the results of the experiments, the gas holdup and volumetric liquid phase mass transfer coefficient decreased with decreasing the concentration of CMC aqueous solution, increased with increasing the gas velocity and increased with increasing the circulated area ratio of the draught tube.

• 한국농공학회지
• /
• 제42권2호
• /
• pp.86-92
• /
• 2000

The model using homogenization technique based on energy concept for the prediction of the failure criterion of staple fiber mixed soil was developed to increase the practice and the application of staple fiber as a reinforcement for improving soft ground. Parameters of the model are aspect ratio and volumetric content of fiber, cohesion and internal friction angle of soil, adhesion intercept and interface friction angle of soil and fiber. It is considered that the model developed in this study is applicable to the soil composed of clay, silt and sand mixed by thread types of fiber such as steel bar, steel fiber, natural fiber etc.

• 한국통신학회논문지
• /
• 제25권4B호
• /
• pp.715-724
• /
• 2000

본 논문에서는 볼륨 영상의 점진적 무 손실 압축에 효율적인 3차원 대역분할 필터 군을 제안한다. 이를 위해 지금까지 1차원 무 손실 대역분할 필터 군에 적용되어져왔던 ORT(Overlapping Rounding Transform)를 두 가지 형태의 3차원 무 손실 대역분할 필터 군-분리형(separable)과 비 분리형(non-separable)-을 구현하는데 기본적으로 사용하였다. 분리형 필터 군은 1차원 무 손실 대역분할 필터 군을 연속적으로 적용함으로써, 비 분리형 필터 군은 ORT를 3차원으로 확장 적용함으로써 구현되었다. 특히, 기존의 3차원 HINT(Hierachical INTerpolation) 알고리즘은 제안된 ORT 기반 3차원 비 분리형 필터 군으로 일반화된다. 다양한 볼륨 의료 영상에 제안된 방식을 적용함으로서, 제안된 분리형/비 분리형 대역분할 필터 군이 기존의 블록 기반 변환 방식과 3차원 HINT 보다 압축성능(엔트로피)면에서 우수함을 확인하였다.

• 대한기계학회논문집B
• /
• 제35권12호
• /
• pp.1383-1389
• /
• 2011

본 연구는 태양열 발전에 사용하는 공기식 다채널 체적식 흡수기의 일관성 있는 열전달 해석에 초점을 두고 있다. 이를 위해 흡수 소재 물성과 채널 형상 변화의 영향을 몬테카를로 광선추적법에 기반한 광학 모델과 전도, 대류, 복사를 고려한 1 차원 열전달 모델에 동시에 반영하였다. 광학 모델 결과는 채널 반경 대비 길이의 형상비가 매우 커서 대부분의 태양 에너지는 15 mm 이내의 짧은 길이에서 흡수됨을 증명하고 있다. 복사 열손실 분류를 통해 채널의 낮은 흡수율에서는 방사 손실은 줄지만 반사손실이 증가하여 흡수기 효율이 감소하는 것을 보였다. 큰 채널 반경이나 작은 질량 유량으로 인해 흡수기 평균 온도가 상승할 때, 방사 손실과 반사 손실 모두 증가하지만 방사 손실의 영향이 더 큰 것으로 나타났다.

• Journal of Radiation Protection and Research
• /
• 제43권2호
• /
• pp.59-65
• /
• 2018

Background: We analyzed changes in the doses, structure volumes, and dose-volume histograms (DVHs) when data were transferred from one commercial treatment planning system (TPS) to another commercial TPS. Materials and Methods: A total of 22 volumetric modulated arc therapy (VMAT) plans for nasopharyngeal cancer were generated with the Eclipse system using 6-MV photon beams. The computed tomography (CT) images, dose distributions, and structure information, including the planning target volume (PTV) and organs at risk (OARs), were transferred from the Eclipse to the MRIdian system in digital imaging and communications in medicine (DICOM) format. Thereafter, DVHs of the OARs and PTVs were generated in the MRIdian system. The structure volumes, dose distributions, and DVHs were compared between the MRIdian and Eclipse systems. Results and Discussion: The dose differences between the two systems were negligible (average matching ratio for every voxel with a 0.1% dose difference criterion = $100.0{\pm}0.0%$). However, the structure volumes significantly differed between the MRIdian and Eclipse systems (volume differences of $743.21{\pm}461.91%$ for the optic chiasm and $8.98{\pm}1.98%$ for the PTV). Compared to the Eclipse system, the MRIdian system generally overestimated the structure volumes (all, p < 0.001). The DVHs that were plotted using the relative structure volumes exhibited small differences between the MRIdian and Eclipse systems. In contrast, the DVHs that were plotted using the absolute structure volumes showed large differences between the two TPSs. Conclusion: DVH interpretation between two TPSs should be performed using DVHs plotted with the absolute dose and absolute volume, rather than the relative values.