• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.673-679
• /
• 2001

The objective of this work is to estimate the temperature dependent thermal properties of the APC-2 composite using a inverse parameter estimation technique. The present inverse method features the estimation of the thermal conductivity and the volumetric heat capacity, which are dependent on the temperature inside the composite. Furthermore, the thermal conductivity is directionally dependent because of the aniosotropy of the composite. An on-line temperature measurement system with a suitable method of heating is built. A composite slab is fabricated using thermoplastic prepreg for the investigation. The corresponding computer code for evaluating the thermal properties inversely using the temperature reading transmitted from the measurement system is developed. The parameterized form is used for the rapid and stable estimation. The modified Newtons method is adopted for the solution technique of the inverse analysis. The estimated results are compared with the measured data from a previous study for the verification.

• Journal of Korean Society for Quality Management
• /
• v.30 no.2
• /
• pp.86-98
• /
• 2002

Defining the relationship between the quality of injection molded parts and the process condition is very complicate because of lots of factor are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation even though restricted application. In this research, Neural Network applied for finding optimal processing condition. The percent of volumetric shrinkage compared on each case and show neural network can be successfully applied selecting optimum condition not only within factor level but also between factor level.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.1
• /
• pp.76-86
• /
• 2015

In this study, we presented a method for estimating the potential population damage of the Seoul Nowon-gu area in the event of a terrorist using a vehicle improvised explosive devices (IED). Using the object-based building extraction method with orthophoto image, the area of the apartment has been determined, and the apartment's height and level were estimated based on the elevation data. Using the population estimation method based on total floor area of building, each apartment resident population was estimated, and then potential population damage at the time of terrorist attacks was estimated around the subway station through a scenario analysis. Terrorism damage using IED depends on the type of vehicle greatly because of the amount loadable explosives. Therefore, potential population damage was calculated based on the type of vehicle. In the results, the maximum potential damage population during terrorist attacks has been estimated to occur around Madeul station, Nowon-gu. The method used in this study can be used various population estimation research and disaster damage estimation.

• Journal of Biomedical Engineering Research
• /
• v.19 no.3
• /
• pp.321-325
• /
• 1998

This paper presents a simple, practical, and efficient method for estimating the speed of sound in reflection mode in ultrasound medical imaging. Its accurate determination is indispensable in order to obtain both good resolution and correct geometrical and volumetric information about human organs such as heart and kidney. Up to now, there have been several methods available, but they all suffer from either poor performance or high complexity. The proposed method finds out an optimum focusing delay profile in such a way that the brightness in a region of interest is maximized using continuous dynamic focusing in receive under fixed transmit focusing. Experiments carried out on a real ultrasound medical phantom reveals that the method a quite simple and effective in providing good speed of sound estimation, hence improved resolution and images, adding to dignostic utility.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.765-774
• /
• 2019

In this paper, we propose a point cloud matching algorithm for multiple RGB-D cameras. In general, computer vision is concerned with the problem of precisely estimating camera position. Existing 3D model generation methods require a large number of cameras or expensive 3D cameras. In addition, the conventional method of obtaining the camera external parameters through the two-dimensional image has a large estimation error. In this paper, we propose a method to obtain coordinate transformation parameters with an error within a valid range by using depth image and function optimization method to generate omni-directional three-dimensional model using 8 low-cost RGB-D cameras.

• The Korean Journal of Nuclear Medicine
• /
• v.27 no.2
• /
• pp.170-174
• /
• 1993

The quantitative methods for the assessment of the cerebral blood flow using $^{99m}Tc$-HMPAO brain SPECT utilize the measured count distribution in some specific reconstructed tomographic slice or in algebraic summation of a few neighboring slices, rather than the true volumetric distribution, to estimate the relative regional cerebral blood flow, and consequently produce the biased estimates of the true regional cerebral blood flow. This kind of biases are thought to originate mainly from the arbitrarily irregular shape of the cerebral region of interest(ROI) which are analyzed. In this study, a semi-automated method for the direct quantification of the volumetric regional cerebral blood flow estimate is proposed, and the results are compared to those calculated by the previous planar approaches. Bias factors due to the partial volume effect and the uncertainty in ROI determination are not considered presently for the methodological comparison of planar/volumetric assessment protocol.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.56-63
• /
• 2010

Purpose : DIR image is relatively free from susceptibility artifacts therefore, DIR image can make it possible to reliably measure cortical thickness/volume. One drawback of the DIR acquisition is the long scan time to acquire the fully sampled 3D data set. To solve this problem, we applied a parallel imaging method (GRAPPA) and verify the reliability of using the volumetric study. Materials and methods : Six healthy volunteers (3 males and 3 females; age $25.33{\pm}2.25$ years) underwent MRI using the 3D DIR sequence at a 3.0T Siemens Tim Trio MRI scanner. GRAPPA simulation was performed from the fully sampled data set for reduction factor 2. Data reconstruction was performed using MATLAB R2009b. Freesurfer v.4.3.0 was used to evaluate the cortical thickness of the entire brain, and to extract white matter information from the DIR image, Analyze 9.0 was used. The global cortical thickness estimated from the reconstructed image was compared with reference image by using a T-test in SPSS. Results : Although reduced SNR and blurring are observed from the reconstructed image, in terms of segmentation the effect was not so significant. The volumetric result was validated that there were no significant differences in many cortical regions. Conclusion : This study was performed with DIR image for a volumetric MRI study. To solve the long scan time of 3D DIR imaging, we applied GRAPPA algorithm. According to the results, fast imaging can be done with reduction factor 2 with little loss of image quality at 3.0T.

• Journal of Broadcast Engineering
• /
• v.25 no.7
• /
• pp.1095-1106
• /
• 2020

In this paper, we propose an algorithm that extracts a high-precision 3D skeleton using a model generated using a distributed RGB-D camera. When information about a 3D model is extracted through a distributed RGB-D camera, if the information of the 3D model is used, a skeleton with higher precision can be obtained. In this paper, in order to improve the precision of the 2D skeleton, we find the conditions to obtain the 2D skeleton well using the PCA. Through this, high-quality 2D skeletons are obtained, and high-precision 3D skeletons are extracted by combining the information of the 2D skeletons. Even though this process goes through, the generated skeleton may have errors, so we propose an algorithm that removes these errors by using the information of the 3D model. We were able to extract very high accuracy skeletons using the proposed method.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.10
• /
• pp.1219-1230
• /
• 2004

Comparing to the gravimetric and volumetric method, the flowmeter calibration based on the master meter method is relatively economical and convenient, especially for high flowrate. The uncertainty of flow quantity and flowrate using the master meter method was evaluated according to the GUM (Guide to the Expression of Uncertainty in Measurement). In order to apply for the wider flow range, two master meters (electromagnetic flow meter) were employed as reference flowmeters. The uncertainty of the master meter was obtained by combining the statistical variation of the repeated measurements and the variation of fluid density and pipe material due to temperature and pressure changes were scrutinized. for a practical application, the uncertainty of calibrator, whose measuring capacity of 1000 ㎥/h obtained by employing two 500 ㎥/h electromagnetic How meters, was evaluated. The uncertainty budget shows the quantitative contribution of each uncertainty component to the overall uncertainty of the calibrator. As a result, it was found that the dominant uncertainties were from the master meter, which was evaluated statistically, and from the process of least squares fitting. On the contrary, the uncertainties arising from the variation of the fluid density and the pipe volume due to the temperature and pressure were negligible.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.57-63
• /
• 2017

In the paper, we propose a new reliable technique for measuring food intake based on image automatically without user intervention. First, food and bowl image before and after meal is obtained by user. The food and the bowl are divided into each region by the K-means clustering, Otsu algorithm, Morphology, etc. And the volume of food is measured by a proportional expression based on the information of the container such as it's entrance diameter, depth, and bottom diameter. Finally, our method calculates the volume of the consumed food by the difference between before and after meal. The proposed technique has higher accuracy than existing method for measuring food intake automatically. The experiment result shows that the average error rate is up to 7% for three types of containers. Computer simulation results indicate that the proposed algorithm is a convenient and accurate method of measuring the food intake.