• 한국산림과학회지
• /
• 제99권1호
• /
• pp.57-61
• /
• 2010

본 연구는 난대산림연구소의 제주시험림에 있는 붉가시나무(Quercus acuta)에 대한 개체목의 수간곡선식 추정 및 간재적을 추정하기 위하여 수행되었다. 최적의 추정식을 선택하기 위하여 Max and Burkhart식, Kozak식 및 Lee식을 적용하여 각 식의 직경 추정에 대한 검정 통계량 및 실측치와 추정치간의 오차분포를 검증하였다. 그 결과 Max and Burkhart식 및 Lee식이 특정 구간에서 과대치 또는 과소 추정치를 보인데 반하여 Kozak식은 전구간에서 고른 분포를 보였다. 추정력이 가장 좋은 Kozak식을 활용하여 수피포함 재적표를 작성하였다.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.623-635
• /
• 2015

지하수위 아래에 건설되는 복층터널은 비교적 대단면이며 비배수 터널로 건설되는 특징을 가지고 있다. 지하수위 하부에 위치하는 터널은 지하수로 인해 발생하는 부력으로부터 터널의 안정성 확보방안이 필요하다. 일반적으로 터널 라이닝과 지반사이의 경계면에서의 결합력은 부력에 대해 충분한 안정성을 발휘한다. 그러나 장기적인 시간이 경과하면 구조물의 열화로 인하여 결합력이 감소할 수 있다. 본 연구에서는 장기적인 관점에서 부력으로 인한 복층터널의 영향을 조사하였다. 그 결과 부력으로 인해 터널 하단부분에서 변형과 라이닝에 작용하는 응력이 증가하였다. 본 연구로부터 운영중 터널의 라이닝과 지반사이의 결합력을 유지시킬 수 있는 방안이 필요함을 알 수 있다.

• 한국산림과학회지
• /
• 제17권1호
• /
• pp.23-28
• /
• 1973

본시험(本試驗)은 리기다소나무 임분(林分)의 재적성장량(材積成長量)을 추정(推定)하기 위(爲)하여 예비적(豫備的)으로 직경성장량(直徑成長量)을 추정(推定)한 것이다. 표준목(標準木) 223본(本)중 기각목(棄却木)은 전체(全體) 본수(本數)의 약(約) 5%인 12본(本)으로 대체적으로 일률적(一律的)인 성장(成長)을 하고있으며 기각목(棄却木)은 병충해목(病蟲害木)이 이에 속(屬)하고 있으며 임상별(林相別)로 기(旣) 조사발표(調査發表)된 것과 비교(比較)할 때에 단일수종(單一樹種)인 리기다소나무 임분(林分)의 성장(成長)이 가장 좋았다. 직경(x)과 직경성장량(y)과의 관계(關係)를 보면 다음과 같다. y=0.1618+0.0298x 단(但) r=0.9886이다. 리기다소나무 16년생임분(年生林分)의 D.B.H와 평균연년(平均連年) 직경성장량(直徑成長量)의 최소(最少), 평균(平均) 및 최대치(最大値)는 다음과 같다.

• 대한수의학회지
• /
• 제47권2호
• /
• pp.139-145
• /
• 2007

Measurement uncertainty could play an important role in the assessment of test results in laboratories and industries. We investigated measurement uncertainties possibly included in determination of flubendazole, a benzimidazole anthelmintic, in pork by HPLC. The concentration of flubendazole was 62.69 ng/g in a sample of pork. Uncertainty was estimated in the analytical procedure of flubendazole. A model equation was made for determination of flubendazole in pork. The four uncertainty components such as weight of sample, volume of sample, calibration curve, and recovery were selected to estimate measurement uncertainties. Standard uncertainty was calculated for each component and all the standard uncertainties were combined. The combined standard uncertainty was expanded to a sample population as an expanded uncertainty. The expanded uncertainty was calculated using k value on Student's t-table and effective degrees of freedom from Welch-Satterthwaite formula. The expanded uncertainty was calculated as 3.45 with the combined standard uncertainty, 1.584 6 and the k value, 2.18. The final expression can be ($62.69{\pm}3.45$) ng/g (confidence level 95%, k = 2.18). The uncertainty value might be estimated differently depending on the selection of the uncertainty components. It is difficult to estimate all the uncertainty factors. Therefore, it is better to take several big effecting components instead of many small effecting components.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.99-103
• /
• 1998

The curved surface machined by plate end mill causes a excess non-cutting volume, in these cases ball end mill is used for the curved surfaces. This study is aimed to obtain the optimum cutting conditions of various cutting speed, table speed, tool diameter, radius of curvature roughness on the conditions of various cutting speed, tool diameter, radius of curvature when machining the curved surface using the ball end mill. After designing curve rates, obtaining NC data by CAD/CAM system through CC-Cartesian method and transferred the data through DNC system, we machined the specimens by the CNC machining center, The surface roughness of specimens was measured by surface roughness tester and CNC 3D coordinate measuring machine. The cutting condition were the same as follow velocity; 15, 20, 25 30m/min, feed rate;40, 60, 80, 100m/min and radius of curvature; 30,40,50,60mm, tool diameters; ø8, ø12, ø16, ø 20mm. Analizing the working results, we can acquire the optimum cutting condition of curved specimen at the cutting velocity of 20~25m/min and the feed rate of 80mm/min. As the same cutting condition the best surface roughness was showed at ø16mm of the tool diameter. But the tool diameter was smaller than ø8mm. we could improve for the surface roughness by controlling the cusp.

• 한국소음진동공학회논문집
• /
• 제17권1호
• /
• pp.72-79
• /
• 2007

정밀 장비 운전시 지반진동 절연을 목적으로 널리 사용되는 공압제진대는 정밀 장비에서 요구하는 지반진동 규제의 강화에 따라 보다 개선된 절연성능을 요구받는다. 수동형 공압제진대의 경우, 제진대의 설계 변수들을 이용하여 그 성능을 개선하고 있으나, 제진대의 고유진동수 및 그 부근에서의 절연 성능 향상에는 한계가 있다. 이 연구에서는 진폭 의존성 등의 비선형성을 가지는 공압제진대에 대하여 비선형 강인성 능동제어이론인 시간지연 제어 기법을 적용하여 고유진동수 및 그 부근에서의 절연성능을 향상시키고자 한다. 공압제진대에 시간지연 제어기법을 적용하는 과정 및 능동제어 이론 적용에 따른 절연 성능 향상에 대한 모사실험 결과를 기술하고자 하며, 실험을 통하여 그 유효성 보이고자 한다.

• 대한가정학회지
• /
• 제19권2호
• /
• pp.189-198
• /
• 1981

The Gwugonsiuebang is a book of Korean woman's life in the Yi dynasty which published I 1653 by Mme. Jang. I have studied the food habits of the Yi dynasty that wrote in Gwugonsiueband as following. The staple foods are Guksu (wheat vemicell as like western noodles) 5, Mandu (bun stuffed with seasoned meat and vegetables) 6 kinds in this book. the side dishes are Guk (soup) 8, J'm (steamed meat or fish) 6, chae6, Nooruemi 5, Hyae (sliced raw fish) 3, Jockpyun (jellied beef soup) 3, Jockgall (salted sea food) 2, Jock (skewer or broach) 2, jihee 2, Sun (Steaming of stuffed vegetable) 1, Bockuem (saute) 1, Jon (pan fried fish) 1, Gui (meat or fish grilled with seasoning) 1, and the other 13 kinds. The desserts are D,ock (Korean rice cake) 11, jabgwa 8, Beverages 5 kinds and Jungwa 1 kind. The alcohol and fruits wine are 51 kinds. The alcohol and fruits wine are 51 kinds. The seasonings are Soybean sauce, oil, Sesamol oil, pepper, Ginger, Garlic, Vinegar, Wine, Salt, Bean paste etc. Raw materials of Guksu, Mandu, D'ock, Jabgwa, Beverage, Wine, vinegar are all carbohydrates. It shows that a tendency of Korean people too much take a carbohydrates. Now and then, there are no special difference of winter over pass for vegetables, fruits, dried beef, dried fish and salt fishes. In yi dynasty, there are 62 kinds of table ware and cooking kitchen utensils, but many of them come to uselessness. 19 kinds of measuring unit are very non-scientific because that is not by weight but by bulk or volume. There are many food making terms which are 198 kinds of prepared cooking term, 11 kinds of cutting term and 20 kinds of boiling term. And 10 kinds of expression of taste can see this book.

• The Korean Journal of Physiology and Pharmacology
• /
• 제11권3호
• /
• pp.113-119
• /
• 2007

Developmental disability shows life-long behavioral abnormality with no significant physical malformation. This study was undertaken to develop an animal model for developmental disability by using two-factor approach. Lipopolysaccharide (LPS), a bacterial toxin, and NAN-190, a $5-HT_{1A}$ receptor antagonist, were administered to Sprague-Dawley rats on postnatal day (PND) 5 to induce inflammation and an altered 5-HT system, respectively. Long-term alteration of behavior occurred in the drug-treated groups. The LPS-treated group showed impaired motor coordination in the Rota-rod test. The LPS- treated or both LPS and NAN-190-treated groups showed impaired fore-paw muscle power in the wire maneuver test. These groups also showed decreased white matter volume and increased serotonergic fibers. The LPS and NAN-190-treated group also exhibited neurologic deficit in the placing reaction test and impaired equilibrium function in the tilt table test. The results showed that a variety of altered behaviors can be generated by two factor model, and suggested that combination of important etiologic factors and possible underlying defects is a promising strategy of establishing an animal model for developmental disabilities.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.95-102
• /
• 2020

Population concentration in urban areas has led traffic management a central issue. To mitigate traffic congestions, the government has planned to construct large-cross-section tunnels deep underground. This study focuses on estimating the damage caused to frame structures owing to tunnel excavation. When constructing a tunnel network deep underground, it is necessary to divide the main tunnel and connect the divergence tunnel to the ground surface. Ground settlement is caused by excavation of the adjacent divergence tunnel. Therefore, predicting ground settlement using diverse variables is necessary before performing damage estimation. We used the volume loss and cover-tunnel diameter ratio as the variables in this study. Applying the ground settlement values to the settlement induction device, we measured the extent of damage to frame structures due to displacement at specific points. The vertical and horizontal displacements that occur at these points were measured using preattached LVDT (Linear variable differential transformer), and the lateral strain and angular distortion were calculated using these displacements. The lateral strain and angular distortion are key parameters for structural damage estimation. A damage assessment chart comprises the "Negligible", "Very Slight Damage", "Slight Damage", "Moderate to Severe Damage", and "Severe to Very Severe Damage" categories was developed. This table was applied to steel frame and concrete frame structures for comparison.

• 한국가정과교육학회지
• /
• 제8권1호
• /
• pp.79-91
• /
• 1996

The purpose of the study is to see as to how much of changes has occurred in the newly revised Home Economics Textbooks required by the 6th Curriculum as compared to those by the former 5th Curriculum, and to seek future policy directions with can be improved even better, if any, for further revision. To implement this proposal, the study employs 8 different textbooks published in 1995 geared for the 6th Curriculum for data base. The components of the contents divides into two major parts. The first part falls into a category of holistic analysis of the textbooks, which gives a general perspective of the changes in the textbook revised. It includes those areas of changes in the total number of pages, cover page, illustrations, table of contents, appendices, unit cover, introductory remarks, summary and evaluation, etc. It also covers the information on authors of textbook. The latter part consists of several specific areas of major changes occurred in the textbooks for the 6th Curriculum. It covers such areas of changes in the composition of category and its weight, laboratory experiences, and illustrations and tables. To conclude the study, among many findings, two major points are of great importance to mention here. First, the new textbooks have adopted more of varieties in physical appearances and contents per se as to the older ones. And yet, there still found a weakness in numbers of authors participated to a full reflection on contents variety. In addition, the background of authors reflected on an unrealistic idealism which lacks the on-site information provided by the school teachers. Second, the strict regulations created by the Ministry of Education for developing textbook found restricting the authors creativity and thus contents variety of textbooks. Those restricting factors include letter type and size, coloring, paper quality, and volume size.