• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.57-61
• /
• 2010

Data with collected from 278 trees sampled through out the climatic range of Quercus acuta in Jeju Experiment Forests. The models tested to select the best-fit equations form the Max & Burkhart's model, Kozak's model, and Lee's model. Performance of the equations in predicting of residuals on predicted values. In result, all three models gave slightly better values of fit statistics. In plotting residuals against predicted diameter, Max & Burkhart's model showed underestimation in predicting small diameter and Lee's Model did the same in predicting small diameter. Based on the above analysis of three models in predicting stem taper, Kozak's model was chosen for the best-fit stem taper equations, and its parameter estimates was given for Quercus acuta. Kozak's model was used to develop a stem volume table outside bark for Quercus acuta.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.623-635
• /
• 2015

Double-deck tunnels beneath the groundwater table have relatively large volume and commonly constructed as watertight tunnels. In this case, it requires to secure stability of the tunnels for buoyant force. Generally the contact force between lining and ground is sufficient to resist the buoyant force. However in the long-term the contact force could be reduced because of structural deterioration. In this study the effect of long-term buoyant force acting on the double-deck tunnel is investigated. The results has shown that the buoyant force has increased invert deformation and stress. It is indicated that the contact resilience between lining and ground needs to be kept during tunnel operation.

• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.23-28
• /
• 1973

In this survey, to estimate volume growth of pitch pine (Pinus rigida Mill) stand, diameter growth was estimated. Among 223 sample trees, the number of rejected trees was 12, about 5 percent of total sample trees. The stand showed uniform growth and rejected trees included insect-damaged trees. Compared with reports made on forest classification basis, pitch pine a single species showed faster growth. Minimum, average and maximum value of D.B.H and mean annual diameter growth, of 16 year old pitch pine stand, were as follow. The correlation of each factors estimated by 9590 of confidence interval is shown in the table of correlation as bellow.

• Korean Journal of Veterinary Research
• /
• v.47 no.2
• /
• pp.139-145
• /
• 2007

Measurement uncertainty could play an important role in the assessment of test results in laboratories and industries. We investigated measurement uncertainties possibly included in determination of flubendazole, a benzimidazole anthelmintic, in pork by HPLC. The concentration of flubendazole was 62.69 ng/g in a sample of pork. Uncertainty was estimated in the analytical procedure of flubendazole. A model equation was made for determination of flubendazole in pork. The four uncertainty components such as weight of sample, volume of sample, calibration curve, and recovery were selected to estimate measurement uncertainties. Standard uncertainty was calculated for each component and all the standard uncertainties were combined. The combined standard uncertainty was expanded to a sample population as an expanded uncertainty. The expanded uncertainty was calculated using k value on Student's t-table and effective degrees of freedom from Welch-Satterthwaite formula. The expanded uncertainty was calculated as 3.45 with the combined standard uncertainty, 1.584 6 and the k value, 2.18. The final expression can be ($62.69{\pm}3.45$) ng/g (confidence level 95%, k = 2.18). The uncertainty value might be estimated differently depending on the selection of the uncertainty components. It is difficult to estimate all the uncertainty factors. Therefore, it is better to take several big effecting components instead of many small effecting components.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.99-103
• /
• 1998

The curved surface machined by plate end mill causes a excess non-cutting volume, in these cases ball end mill is used for the curved surfaces. This study is aimed to obtain the optimum cutting conditions of various cutting speed, table speed, tool diameter, radius of curvature roughness on the conditions of various cutting speed, tool diameter, radius of curvature when machining the curved surface using the ball end mill. After designing curve rates, obtaining NC data by CAD/CAM system through CC-Cartesian method and transferred the data through DNC system, we machined the specimens by the CNC machining center, The surface roughness of specimens was measured by surface roughness tester and CNC 3D coordinate measuring machine. The cutting condition were the same as follow velocity; 15, 20, 25 30m/min, feed rate;40, 60, 80, 100m/min and radius of curvature; 30,40,50,60mm, tool diameters; ø8, ø12, ø16, ø 20mm. Analizing the working results, we can acquire the optimum cutting condition of curved specimen at the cutting velocity of 20~25m/min and the feed rate of 80mm/min. As the same cutting condition the best surface roughness was showed at ø16mm of the tool diameter. But the tool diameter was smaller than ø8mm. we could improve for the surface roughness by controlling the cusp.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.1 s.118
• /
• pp.72-79
• /
• 2007

As environmental vibration requirements on precision equipment become more stringent, use of pneumatic isolators has become more popular and their performance is subsequently required to be further improved. Dynamic performance of passive pneumatic isolators is related to various design parameters in a complicated manner and, hence, is very limited especially in low frequency range by volume of chambers. In this study, an active control technique, so called time delay control which is considered to be adequate for a low frequency or nonlinear system, is applied to a single chamber pneumatic isolator. The procedure of applying the tine delay control law to the pneumatic isolator is presented and its effectiveness in enhancement of transmissibility performance is shown based on simulation and experiment. Comparison between passive and active pneumatic isolators is also presented.

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.189-198
• /
• 1981

The Gwugonsiuebang is a book of Korean woman's life in the Yi dynasty which published I 1653 by Mme. Jang. I have studied the food habits of the Yi dynasty that wrote in Gwugonsiueband as following. The staple foods are Guksu (wheat vemicell as like western noodles) 5, Mandu (bun stuffed with seasoned meat and vegetables) 6 kinds in this book. the side dishes are Guk (soup) 8, J'm (steamed meat or fish) 6, chae6, Nooruemi 5, Hyae (sliced raw fish) 3, Jockpyun (jellied beef soup) 3, Jockgall (salted sea food) 2, Jock (skewer or broach) 2, jihee 2, Sun (Steaming of stuffed vegetable) 1, Bockuem (saute) 1, Jon (pan fried fish) 1, Gui (meat or fish grilled with seasoning) 1, and the other 13 kinds. The desserts are D,ock (Korean rice cake) 11, jabgwa 8, Beverages 5 kinds and Jungwa 1 kind. The alcohol and fruits wine are 51 kinds. The alcohol and fruits wine are 51 kinds. The seasonings are Soybean sauce, oil, Sesamol oil, pepper, Ginger, Garlic, Vinegar, Wine, Salt, Bean paste etc. Raw materials of Guksu, Mandu, D'ock, Jabgwa, Beverage, Wine, vinegar are all carbohydrates. It shows that a tendency of Korean people too much take a carbohydrates. Now and then, there are no special difference of winter over pass for vegetables, fruits, dried beef, dried fish and salt fishes. In yi dynasty, there are 62 kinds of table ware and cooking kitchen utensils, but many of them come to uselessness. 19 kinds of measuring unit are very non-scientific because that is not by weight but by bulk or volume. There are many food making terms which are 198 kinds of prepared cooking term, 11 kinds of cutting term and 20 kinds of boiling term. And 10 kinds of expression of taste can see this book.

• The Korean Journal of Physiology and Pharmacology
• /
• v.11 no.3
• /
• pp.113-119
• /
• 2007

Developmental disability shows life-long behavioral abnormality with no significant physical malformation. This study was undertaken to develop an animal model for developmental disability by using two-factor approach. Lipopolysaccharide (LPS), a bacterial toxin, and NAN-190, a $5-HT_{1A}$ receptor antagonist, were administered to Sprague-Dawley rats on postnatal day (PND) 5 to induce inflammation and an altered 5-HT system, respectively. Long-term alteration of behavior occurred in the drug-treated groups. The LPS-treated group showed impaired motor coordination in the Rota-rod test. The LPS- treated or both LPS and NAN-190-treated groups showed impaired fore-paw muscle power in the wire maneuver test. These groups also showed decreased white matter volume and increased serotonergic fibers. The LPS and NAN-190-treated group also exhibited neurologic deficit in the placing reaction test and impaired equilibrium function in the tilt table test. The results showed that a variety of altered behaviors can be generated by two factor model, and suggested that combination of important etiologic factors and possible underlying defects is a promising strategy of establishing an animal model for developmental disabilities.

• Geomechanics and Engineering
• /
• v.21 no.2
• /
• pp.95-102
• /
• 2020

Population concentration in urban areas has led traffic management a central issue. To mitigate traffic congestions, the government has planned to construct large-cross-section tunnels deep underground. This study focuses on estimating the damage caused to frame structures owing to tunnel excavation. When constructing a tunnel network deep underground, it is necessary to divide the main tunnel and connect the divergence tunnel to the ground surface. Ground settlement is caused by excavation of the adjacent divergence tunnel. Therefore, predicting ground settlement using diverse variables is necessary before performing damage estimation. We used the volume loss and cover-tunnel diameter ratio as the variables in this study. Applying the ground settlement values to the settlement induction device, we measured the extent of damage to frame structures due to displacement at specific points. The vertical and horizontal displacements that occur at these points were measured using preattached LVDT (Linear variable differential transformer), and the lateral strain and angular distortion were calculated using these displacements. The lateral strain and angular distortion are key parameters for structural damage estimation. A damage assessment chart comprises the "Negligible", "Very Slight Damage", "Slight Damage", "Moderate to Severe Damage", and "Severe to Very Severe Damage" categories was developed. This table was applied to steel frame and concrete frame structures for comparison.

• Journal of Korean Home Economics Education Association
• /
• v.8 no.1
• /
• pp.79-91
• /
• 1996

The purpose of the study is to see as to how much of changes has occurred in the newly revised Home Economics Textbooks required by the 6th Curriculum as compared to those by the former 5th Curriculum, and to seek future policy directions with can be improved even better, if any, for further revision. To implement this proposal, the study employs 8 different textbooks published in 1995 geared for the 6th Curriculum for data base. The components of the contents divides into two major parts. The first part falls into a category of holistic analysis of the textbooks, which gives a general perspective of the changes in the textbook revised. It includes those areas of changes in the total number of pages, cover page, illustrations, table of contents, appendices, unit cover, introductory remarks, summary and evaluation, etc. It also covers the information on authors of textbook. The latter part consists of several specific areas of major changes occurred in the textbooks for the 6th Curriculum. It covers such areas of changes in the composition of category and its weight, laboratory experiences, and illustrations and tables. To conclude the study, among many findings, two major points are of great importance to mention here. First, the new textbooks have adopted more of varieties in physical appearances and contents per se as to the older ones. And yet, there still found a weakness in numbers of authors participated to a full reflection on contents variety. In addition, the background of authors reflected on an unrealistic idealism which lacks the on-site information provided by the school teachers. Second, the strict regulations created by the Ministry of Education for developing textbook found restricting the authors creativity and thus contents variety of textbooks. Those restricting factors include letter type and size, coloring, paper quality, and volume size.