• 한국음향학회지
• /
• 제35권6호
• /
• pp.491-500
• /
• 2016

본 논문에서는 공기를 통과시켜 풍압을 저감하면서 소음을 제어할 수 있는 새로운 개념의 방음벽의 음향감쇠 특성을 분석하였다. 통기형 방음벽의 소음저감 특성을 조사하기 위하여 우선 개구부의 크기 및 공명기의 체적 등을 변화시켜 총 17가지 방음벽 모델의 음향감쇠계수를 측정하였다. 실험결과 공명기의 체적과 개구부의 면적에 따라 음향감쇠계수 값이 달라지고 있으며, 목표 주파수대역(400 ~ 1250 Hz)에서 단일 방음벽보다 이중 방음벽의 음향감쇠계수가 더 높게 나타났다. 이를 통해 개구부 및 공명기의 물리적 특성이 통기형 방음벽의 차음특성에 영향을 미친다는 점을 밝혀냈다.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.361-372
• /
• 2019

The flow pattern of air layers and skin-friction drag reduction by air injection are investigated to find the suitable multiphase flow model using unstructured finite-volume CFD solver for the Reynolds-averaged Navier-Stokes equations. In the present computations, two different multiphase flow modeling approaches, such as the Volume of Fluid (VOF) and the Eulerian Multi-Phase (EMP), are adopted to investigate their performances in resolving the two-phase flow pattern and in estimating the frictional drag reduction. First of all, the formation pattern of air layers generated by air injection through a circular opening on the bottom of a flat plate are investigated. These results are then compared with those of MMkiharju's experimental results. Subsequently, the quantitative ratios of skin-friction drag reduction including the behavior of air layers, within turbulent boundary layers in large scale and at high Reynolds number conditions, are investigated under the same conditions as the model test that has been conducted in the US Navy's William B. Morgan Large Cavitation Channel (LCC). From these results, it is found that both VOF and EMP models have similar capability and accuracy in capturing the topology of ventilated air cavities so called'air pockets and branches'. However, EMP model is more favorable in predicting quantitatively the percentage of frictional drag reduction by air injection.

• Tribology and Lubricants
• /
• 제25권5호
• /
• pp.348-358
• /
• 2009

To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the manufacturing technology of cast iron thinner width ring can bring the friction reduction between the ring and liner during engine running. Therfore, the fuel economy can be achieved. Thereafter the engine emission can be reduced. In this study, by using a developed basic computer program that predicts the inter-ring pressure, the motion of ring and the inter-ring pressure through a crevice volume model between adjacent rings, and the oil film thickness and the friction computed by lubrication theories, it is to be examined the effect of friction reduction from piston ring pack equipped with thinner width ring and lower tension ring.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.186-192
• /
• 2007

In general, pulsation damper is installed in fuel rail for conventional MPI engine to decrease undesirable noise in vehicle cabin room. However, pulsation damper is so expensive that there are prevailing studies to reduce fuel pressure pulsations with integrated damping effect. This paper is one of basic studies for development of fuel rail to abate pulsations with self-damping effect. Primarily, the pressure pulsation characteristics was investigated with aspect ratio of cross section, wall thickness, and materials of fuel rail. A high aspect ratio or thin wall was found to absorb the pressure pulsations effectively. But volume effects on the fuel pressure pulsation reductions were not especially significant than cross section effects because volume increment rate is larger than pressure pulsation reduction rate. The fuel rail made of aluminum is effective for reduction of pressure pulsation than that of low-carbon steel. Pressure change period increases on the basis of same lengths of supply line and fuel rail as the volume is enlarged and/or the thickness of wall is thinned.

• Archives of Plastic Surgery
• /
• 제50권3호
• /
• pp.288-304
• /
• 2023

Background Untreated lymphedema of an extremity leads to an increase in volume. The therapy of this condition can be conservative or surgical. Methods "Lymphological liposculpture" is a two-part procedure consisting of resection and conservative follow-up treatment to achieve curative volume adjustment of the extremities in secondary lymphedema. This treatment significantly reduces the need for complex decongestive therapy (CDT). From 2005 to 2020, 3,184 patients with secondary lymphedema after breast cancer and gynecological tumors were treated in our practice and clinic. "Lymphological liposculpture" was applied to 65 patients, and the data were recorded and evaluated by means of perometry and questionnaires. Results The alignment of the sick to the healthy side was achieved in all patients. In 58.42% (n = 38), the CDT treatment could be completely stopped postoperatively; in another 33.82% (n = 22) of the patients, a permanent reduction of the CDT was achieved. In 7.69% (n = 5) patients, the postoperative CDT could not be reduced. A total of 92.30% (n = 60) of the patients described a lasting significant improvement in their quality of life. Conclusion "Lymphological liposculpture" is a standardized curative sustainable procedure for secondary lymphedema for volume adjustment of the extremities and reduction of postoperative CDT with eminent improvement of the quality of life.

• 생물정신의학
• /
• 제18권4호
• /
• pp.232-238
• /
• 2011

Objectives Optimized voxel based morphometry (VBM) has been increasingly applied to investigate differences in the brain morphology between a group of patients with mild cognitive impairment (MCI) and control subjects. Optimized VBM permits comparison of gray matter (GM) volume at voxel-level from the entire brain. The purpose of this study was to assess the regional GM volume change measured by optimized VBM in MCI subjects compared to controls. Methods Twenty patients with MCI and 20 control subjects with normal cognition were recruited for this study. We applied the optimized VBM protocol to the image data including study-specific template and the modulation of the data with the Jacobian determinants. GM volume differences between the MCI subjects and the control subjects and their correlations with the neuropsychological performances were investigated. Results Optimized VBM analysis revealed GM volume reduction in hippocampus, precentral gyrus, insula and parietal operculum in the MCI group compared to the control group (family wise error corrected p < 0.05). Korean version of the Consortium to Establish a Registry for Alzheimer's disease (CERAD-K) word list recall scores were significantly correlated with the GM volumes of hippocampus, precuneus and posterior cingulate in the MCI group (FWE corrected p < 0.05). Conclusions The results confirm previous findings of atrophic changes in medial temporal lobe and parietal lobe in the MCI group and suggest that these abnormalities may be related with cognitive decline and prognosis in patients with MCI.

• 대한한방내과학회지
• /
• 제20권1호
• /
• pp.232-243
• /
• 1999

In the Oriental Medicine, the breathing problem is defined as one of the symptoms such as Cheon-Jeung, Hyo-Jeung and chronic respiratory organs disease. Its source is heard to be the functional reduction of descending of Lung and Kidney. The organs for breathing are known as Lung, Spleen and Kidney. In this research, some remarkable results are referred which were detected by measuring the variations of the breathing volume of 20 patients after taking Keumsuyukunjeon. Picrometer is used for the measurement of the volume. The investigation had been performed since from January 1 st to August 31th of 1998. The patients for the experiment were mainly composed of patients who had trouble in breathing due to the pneumonectasis, sthmas, pneumonias. The percent of men is 67% in sex distribution and the ratio of persons over 50's was 85%. After Keumsuyukunjeon was taken to the patients, the enhancement ratio of breathing volume was appeared as 7.7%. The analysis based on an age was that the patients of 40's show the highest volumetric advancement. The ratio of breathing volume was the aged patients whose lung or kidney is weak and it can be used as the prescription for supplement of body and lung. From the relations between the breathing volume before treatment and the enhancement ratio, the increase of the enhancement ratio and the better response to the medicine were shown to the more serious patients. The period of treatment was 27.5 days average. The enhancement ratio of smoker was 23. and that of non-smoker was 50. At the test of relation between the trouble rate in breathing and the enhancement ratio. Grade Ⅲ shows the highest enhancement value 50%. From the experimental results, It is found that Keumsuyukunjeon gives a noticeable benefit for the patients whose main symptom was breathing problem. Long-term treatments for the serious and aged patients will make much more efficient to the reduction of the symptoms.

• 한국방재학회 논문집
• /
• 제9권4호
• /
• pp.99-106
• /
• 2009

본 연구에서는 침투형 우수유출저감시설 중 투수성 보도블록에 대한 침투량을 정량적으로 분석하였다. 이를 위해 다양한 강우 조건하에서 투수성 보도블록의 침투량 산정 실험을 실시하였고 수리실험 결과와 수치모의 결과를 비교 분석하여 적정성을 파악하였다. 투수성 보도블록의 수리실험을 통해 종기침투능을 분석한 결과 강우강도가 커짐에 따라 종기침투능과 유출시작시간은 급격하게 감소되어도 유출이 발생하기 전까지의 침투량은 강우강도에 관계없이 약 300.0 l 이상으로 유지되는 것을 알 수 있었다. 수리실험과 수치모의 결과를 바탕으로 강우강도별 누적침투량의 통계분석에 의한 결정계수 산정결과 $0.958{\sim}0.996$의 높은 상관관계를 나타내었다.

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.201-207
• /
• 2004

High speed rotating airflow inside a HDD chamber causes sub-micron scale disk vibration that could generate significant TMR problems in most of current HDD products. Many publications are presented for the reduction of airflow excitation. One of the most effective methods widely adopted in high-end HDD products is SqueezeAir Bearing Plate (SABP). However, because of its tight assembly clearance between the damper and disk, this method could not be easily implemented in volume production. This article presents a disk damper design that is modified to be feasible for volume production by virtue of a new airflow modeling method.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.64-68
• /
• 2003

The 1.6 vol% and 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting for investigating the effect of heat treatment on tensile strength for composites. The tensile strength without T6 treatment at 293 K was increased with increasing the volume fraction of TiNi fiber and at 363 K the higher the pre-strain, the higher the tensile strength. The tensile strength of the composite with $T_{6}$ treatment at 293 K was found to increase with increasing both the amount of pre-strain and the volume fraction of TiNi fiber and was higher than that without $T_{6}$ treatment. It should be noted that the tensile strength 2.5vol%TiNi/6061Al composites rolled at a 38% reduction ratio was the maximum value of 298 MPa. The tensile strength of composites decreased with increasing the reduction ratio over 38% because of the rupture of TiNi fiber.