• 제목/요약/키워드: Volume of pores

검색결과 221건 처리시간 0.027초

연잎가루 첨가량에 따른 증편의 이화학적, 관능적 특성 (Qualitative Characteristics of Jeung-Pyun Following the Addition of Lotus Leaf Powder)

  • 김성향;박금순
    • 동아시아식생활학회지
    • /
    • 제20권1호
    • /
    • pp.60-68
    • /
    • 2010
  • This study was conducted to evaluate the effects of lotus leaf powder on the qualitative characteristics of Jeung-Pyun (traditional Korean fermented rice cake). To achieve the highest volume and specific volume, 4% lotus leaf powder was required. However the moisture content dropped as the lotus leaf powder was added to the mixture. In addition, pH of Jeung-Pyun decreased the longer it was allowed to ferment, but the pH increased after steaming. We also evalusted the transparency of Jeung-Pyun as lotus leaf powder was added. As the lotus leaf powder was added, the L-value decreased and the a-value and b-value increased. Additionally, the hardness, chewiness and brittleness of Jeung-Pyun increased as more lotus leaf powder was added (p<0.05), but the springiness and cohesiveness did not change. The Jeung-Pyun also became darker and the cells became less uniform as the level of lotus powder increased. A control group of Jeung-Pyun without lotus leaf powder produced the strongest takju flavor, while the sourness decreased as more lotus leaf powder was added. The addition of 2% and 4% lotus leaf powder resulted in the chewiest and most flexible Jeung-Pyun. The results of this evaluation showed that Jeung-Pyun with 4% lotus leaf powder had the best appearance, flavor, texture, and taste, and was generally the most preferred Jeung-Pyun. Finally, SEM evaluation of the Jeung-Pyun, revealed that, higher levels of lotus leaf powder resulted in larger and less consistent pores and bubbles.

국산 주요 수종 및 목질재료 탄화물의 흡착 특성 (Adsorption Characteristics of Charcoals of Major Korean Wood Species and Wood-based Materials)

  • 공석우;김병로
    • Journal of the Korean Wood Science and Technology
    • /
    • 제30권4호
    • /
    • pp.33-40
    • /
    • 2002
  • 본 연구는 한국산 주요 수종의 간벌재 및 목질재료 탄화물의 흡착 특성과 기본적인 성질과의 관계를 검토하였다. 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 국산 간벌재 탄화물의 메틸렌블루 흡착량(MBA)이 증가하는 경향을 보였지만, 탄화온도 600℃에서 최고치를 보이는 목재 수종도 있었다. 수종간 MBA에는 큰 차이가 있었는데 가장 큰 값은 잣나무 탄화물(134 m2/g)이였고, 가장 작은 값은 굴참나무 탄화물(34 m2/g)이였다. 또한 침엽수재는 활엽수재보다 높은 MBA를 나타냈으며, MBA와 탄화전 간벌재의 기건비중과는 부의 상관성을 나타냈다. 목질재료 탄화물의 MBA도 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 증가하는 경향을 보였고, 목질 재료간 MBA의 차이는 크지 않았다. 목질재료 탄화물의 MBA는 간벌재 탄화물에 비해 낮은 수준을 나타내는 것으로 드러났다. 탄화온도가 높아지고, 탄화시간이 길어짐에 따라 간벌재 및 목질재료 탄화물의 비표면적, 총세공용적은 증가하는 경향을 보였고, 탄화온도 600℃에서 MBA의 최고치를 보인 수종은 비표면적도 같은 온도에서 최고치를 나타냈다. MBA와 비표면적 및 총 세공용적간에는 정의 상관을 보였다. 목질재료 탄화물에는 주로 미세 세공이 발달하는 것으로 밝혀졌다.

백련차 분말을 대체한 우리밀 식빵의 품질 특성 (Quality Characteristics of Domestic Wheat White Bread with Substituted Nelumbo nucifera G. Tea Powder)

  • 김영숙;김문용;전순실
    • 한국식품영양학회지
    • /
    • 제21권4호
    • /
    • pp.448-456
    • /
    • 2008
  • In this study, domestic wheat white breads were prepared with the substitution of 1.5, 3.0, 4.5, and 6.0% Nelumbo nucifera G. tea powder(NNTP). The samples and a control were then compared with regard to quality characteristics, including pH, total titratable acidity, fermentation power of dough expansion, specific volume, baking loss, moisture content, color, textural characteristics, external and internal surface appearances, and sensory qualities in order to determine the optimal ratio of NNTP in the formulation. As the NNTP contents increased, the pH of dough and bread, baking loss, and lightness decreased, whereas the total titratable acidity of dough and bread increased. The fermentation power of dough expansion increased with increasing incubation time. The NNTP samples evidenced significantly higher specific volume, greenness, yellowness, resilience, and crumb consistency than were observed in the control group. However, hardness and fracturability evidenced the opposite effect. The water content and uniformity of the crumb pores were highest at a substitution level of 1.5%, and were lowest at a level of 4.5%. Crumb color, flavor, and delicious taste decreased with increasing NNTP contents, whereas lotus leaf flavor, astringency, bitterness, and off-flavor increased. Density of the crumb pore and crumb springiness were not significantly different among the samples. Softness, chewiness, and overall acceptability were maximal with the 1.5% substitution, and were minimal in the 6.0% group. In conclusion, our results demonstrate that $1.5{\sim}3.0%$ NNTP may prove quite useful as a substitute for domestic wheat flour in the production of white bread, and may evidence favorable nutritional and functional properties.

혹한·혹서 피해 저감용 PCM 혼입콘크리트의 내구성에 관한 연구 (A Study on the Durability of PCM Mixed Concrete for the Reduction of Cold and Hot Damage)

  • 김호열;장일영
    • 한국재난정보학회 논문집
    • /
    • 제20권2호
    • /
    • pp.390-397
    • /
    • 2024
  • 연구목적:본 연구에서는 혹서 및 혹한 환경에 노출 콘크리트에서 발생할 수 있는 재난을 방지하기위해 PCM을 활용해 콘크리트에 열성능을 부여하고 내구성에 미치는 영향을 분석하였다. 연구방법:두 종류의 PCM을 시멘트 부피대비 10, 30, 50% 혼입한 콘크리트를 제작한 후 공극량, 동결융해 저항성, 스케일링 저항성을 평가하였다. 연구결과:종류에 상관없이 PCM 분말을 콘크리트에 혼입할 경우 공극량이 감소되는 것으로 나타났고 10%, 30% 혼입시 동결융해 저항성 또한 향상되는 것으로 나타났다. 또한 혼입량이 높아질수록 스케일링 저항성이 향상되는 것을 확인하였다. 결론: 분말형태의 PCM을 콘크리트에 혼입 시 일정수준까지는 채움효과에 의해 내구성을 향상시킬 수 있을 것으로 판단되며 실제 현장 적용을 위해서는 추가적으로 다양한 연구가 뒷받침 되어야 할 것으로 사료된다.

칼슘이 용출된 콘크리트의 공극 구조 및 강도 특성 (Characteristics of Pore Structures and Compressive Strength in Calcium Leached Concrete Specimens)

  • 양은익;최윤석
    • 콘크리트학회논문집
    • /
    • 제23권5호
    • /
    • pp.647-656
    • /
    • 2011
  • 방사성 폐기물 처분 시설과 같은 지하 구조물의 콘크리트 부재가 장기간에 걸쳐 지하수(이온교환수)와 접촉하면 이온교환수와 공극수 사이에 농도구배가 발생한다. 이로 인해 공극수로부터 칼슘이온이 용출되고, 콘크리트의 열화가 진행된다. 따라서 이 연구에서는 콘크리트의 칼슘 용출에 의한 내부공극 구조의 변화를 분석하고, 열화된 콘크리트의 강도 특성을 평가하고자 하였다. 연구 결과, 콘크리트의 칼슘이온이 용출됨에 따라 50~500 nm 크기의 공극들이 상당히 증가하게 되며, 용출 초기에는 200 nm 크기 이상의 공극들이 급격히 증가하고 이후에는 200 nm 크기 이하의 공극들이 증가하는 것으로 나타났다. 칼슘이 용출된 두께가 증가함과 더불어 압축강도는 감소하였으며, 칼슘이 용출된 OPC 콘크리트의 잔류강도는 대략 33~58% 정도로 나타났다.

고압 이산화탄소 반응에 의한 사암과 셰일의 물리적-미세구조적 변화 (Variation of the Physical-microstructural Properties of Sandstone and Shale Caused by CO2 Reaction in High Pressure Condition)

  • 박지환;손진;박형동
    • 터널과지하공간
    • /
    • 제26권4호
    • /
    • pp.293-303
    • /
    • 2016
  • 이산화탄소 지중저장 기술은 이산화탄소 저감을 위한 가장 효과적인 방법 중 하나로 주목받고 있다. 본 연구에서는 이산화탄소 저장조건을 실험실에서 모사하였다. 사암과 셰일 시료를 1M NaCl 용액에 포화시킨 후 $45^{\circ}C$, 10기압의 조건에서 4주 동안 반응시키며 물리적 성질과 미세구조적 성질의 변화를 측정하였다. 부피, 밀도, 탄성파속도, 포아송비, 동탄성계수 등 모든 항목에서 사암 시료에 비해 셰일 시료의 물리적 성질 변화가 크게 나타났다. X선 단층촬영을 통한 미세구조 분석 결과 두 가지 시료 모두에서 공극의 총개수가 감소하였고, 각각의 공극들이 가지는 평균 부피, 평균 표면적, 평균 등가직경 등이 변화하였다. 이는 이산화탄소와 광물의 반응으로 인한 점토 광물의 팽창 및 유출이 원인인 것으로 판단된다. 본 연구결과는 이산화탄소 지중저장 시 발생되는 암반의 물리적, 미세구조적 변화를 예측하는 데 효과적으로 이용될 것으로 기대된다.

유리연마슬러지를 사용한 경량골재 제조 및 골재의 내부기공이 물성에 미치는 영향에 관한 연구 (Preparation of Lightweight Aggregate Using Glass Abrasive Sludge and Effects of Pores on the Aggregate Properties)

  • 추용식;이종규;심광보
    • 한국세라믹학회지
    • /
    • 제42권1호
    • /
    • pp.37-42
    • /
    • 2005
  • 유리연마슬러지와 graphite를 발포제로 사용하여 경량골재를 제조하였으며, 경량골재 내부기공과 물성과의 상관성을 도출하였다. 이때 graphite 함량을 각각 달리하여 성구를 제조하였으며, $700^{circ}C$$800^{circ}C$에서 20분 동안 소성하였다. 소성 전후 골제의 부피 변화를 검토한 결과, 발포제의 첨가량보다는 소성 온도가 즘 더 큰 영향을 미침을 확인하였다 기공의 크기 및 면적은 발포제 첨가량과 소성 온도 상승에 따라 증가하는 특징을 나타내었으나, 발포제 첨가량 $1\%$ 이상에서는 큰 폭의 증가를 동반하지 않았다. 흡수율/열전도율과 기공과의 상관성은 매우 높아, 각각의 상관관계계수는 $0.8\pm$ 이상을 나타내었다.

스팀주입에 의한 토양내 NAPL 제거 실험 (NAPL Removal from Contaminated Soil Using Steam Injection)

  • 이상일;장연수;김선기
    • 한국수자원학회논문집
    • /
    • 제30권5호
    • /
    • pp.459-465
    • /
    • 1997
  • 스팀의 온도와 압력을 이용하여 불수용성 유기화합물(NAPL)로 오염된 토양의 정화가능성을 알아보기 위한 실험을 수행하였다. Octane, Toluene, Xulene과 같은 단일 NAPL인 Gasoline을 대상으로 실험을 수행하였으며, 사용된 토양은 주문진 표준사와 국내 지반에 많인 산재하는 화강토를 선택하였다. 실험결과 1 pore volume의 스팀주입으로 인한 NAPL제거율은 모래의 경우 66∼78%, 화강토의 경우는 45∼73%로 나타나 상대적으로 짧은 시간에 부작용 없이 오염물을 토양으로부터 제거할 수 있는 가능성을 보였다. 배경온도가 높을수록 스팀의 응축이 지연되고 NAPL의 유동성이 중가하여 제거율이 높아짐을 확인하였다. 또한, 스팀주입 후 온수를 유입시켜 간극사이에 증기 및 액체상태로 존재하는 NAPL을 추가로 추출할 수 있었으며, 유입수의 온도에 따라 제거율이 최고 750%까지 상승함을 알 수 있었다.

  • PDF

도공층의 공극과 인쇄적성에 관한 연구(제3보) -라텍스의 특성이 미치는 영향- (Studies on the Pore of Coating Layer and Printability(III) -Effects of Properties of Latices on Pore of Coating Layer-)

  • 이용규;김창근
    • 펄프종이기술
    • /
    • 제33권2호
    • /
    • pp.41-48
    • /
    • 2001
  • This paper was made to evaluate the effect of the type of latex for coating on the printability by investigating the structure of pore such as the pore fraction, the number of pores, pore size and distribution of coated paper. The coated structure is mainly depend on the results of interaction between pigment and binder. It means that the structure of pore formed is chiefly affected by the type of latex. This physical properties of pore have a close relation with ink set-off associated with the drying rate, the speed of penetration of ink into base paper and printing gloss. Therefore it was necessary to find out the relationship between pore structure and the performance of printability by modifying the type of latex to vary the pore structure of coated paper. Acrylic latex was superior to S/B latex in the sedimentation volume, compressibility, smoothness, pore fraction and its number, the weight of transferred ink onto the coated paper and ink repellance. In contrast, water retention and ink setting were not good. in the comparison of anionic and amphoteric latex, amphoteric latex showed better performance in the thickness, smoothness, pore fraction and its number, pore size, the weight of ink transmitted and K&N ink receptivity, etc.

  • PDF

Preparation, characterization of activated carbon fiber from luffa and its application in CVFCW for rainwater treatment

  • Ahmed, Sanjrani Manzoor;Zhou, Boxun;Zhao, Heng;Zheng, You Ping;Wang, Yue;Xia, Shibin
    • Membrane and Water Treatment
    • /
    • 제11권2호
    • /
    • pp.151-158
    • /
    • 2020
  • ACF preparation from different materials has been attached with great attention during these years. This study was conducted to prepare activated carbon fiber (ACF) from luffa through the processes i.e pre-treatment, pre-oxidation and carbonization activation. Besides, this study also characterizes the ACF and its effect, i.e effect of pre-oxidation time and temperature also activation time and temperature on the compressive strength of ACF were investigated. The results from SEM, BET, FTIR and XRD show that the ACF is very efficient. The products under the optimum conditions had a specific surface area of 478.441 m2 /g with an average pore diameter of 3.783nm, and a pore volume of 0.193 cm3 /g. The surface of the luffa fiber is degummed and exposed, which is beneficial to the subsequent process and the increase of product properties. The compressive strength of HP-ACF was prepared under the optimum conditions, which can reach 0.2461 MPa. ACF is rich in micro-pores and has a good application prospect in the field of environmental protection.