• Toxicological Research
• /
• v.20 no.2
• /
• pp.159-166
• /
• 2004

Safety pharmacological properties of CJ-11555, an anti-cirrhotic agent, were investigated in experimental animals and in vitro test system. CJ-11555 had no effects on normal body temperature in rats, motor coordination, chemoshock induced by pentetrazol, electric shock induced by electric shocker and writhing syndromes in mice at dose levels of 100, 300 and 1,000 mg/kg. CJ-11555 inhibited intestinal activity and prolonged hexobarbital-induced sleeping time in mice at the dose level of 1,000 mg/kg. CJ-11555 affected on general activity and behaviour tests in SD rats, such as lacrimation, ptosis, piloerection, decreased body tone, abnormal dispersion within the cage, diarrhoea, red colored faeces, slight hypothermia and decreased grooming, at the dose level of 1,000 mg/kg in rats. CJ-11555 was effected on cardiovascular and respiratory system in anesthetized beagle dogs, such as tachycardia, increase of mean blood pressure and decrease of PR interval, decrease of respiratory rate and minute volume, at dose levels of 10 and 30 mg/kg. However, these effects were also observed in vehicle treated anesthetized beagle dogs. In in vitro experiments, CJ-11555 inhibited agonists (histamine, acetyl-choline or $BaCl_2$) induced contraction of isolated guinea-pig at the concentration of 30$\times$$10^6$ M. CJ-11555 was weekly inhibited hERG channel current at concentrations of 10 and 30$\times$$10^6$ M, and $IC_{50}$ was estimated to be higher than 30${\times}$$10^6$M. Based on these results, it was concluded that CJ-11555 affected on cardiovascular and respiratory system, general activity and behaviour and hexobarbital-induced sleeping time at the dose level of 1,000 mg/kg and contraction of the smooth muscle and hERG channel current at the concentration of 30$\times$$10^6$ M.

• The Korean Journal of Pain
• /
• v.29 no.2
• /
• pp.103-109
• /
• 2016

Background: The location and the number of lumbar sympathetic ganglia (LSG) vary between individuals. The aim of this study was to determine the appropriate level for a lumbar sympathetic ganglion block (LSGB), corresponding to the level at which the LSG principally aggregate. Methods: Seventy-four consecutive subjects, including 31 women and 31 men, underwent LSGB either on the left (n = 31) or the right side (n = 43). The primary site of needle entry was randomly selected at the L3 or L4 vertebra. A total of less than 1 ml of radio opaque dye with 4% lidocaine was injected, taking caution not to traverse beyond the level of one vertebral body. The procedure was considered responsive when the skin temperature increased by more than $1^{\circ}C$ within 5 minutes. Results: The median responsive level was significantly different between the left (lower third of the L4 body) and right (lower margin of the L3 body) sides (P = 0.021). However, there was no significant difference in the values between men and women. The overall median responsive level was the upper third of the L4 body. The mean responsive level did not correlate with height or BMI. There were no complications on short-term follow-up. Conclusions: Selection of the primary target in the left lower third of the L4 vertebral body and the right lower margin of the L3 vertebral body may reduce the number of needle insertions and the volume of agents used in conventional or neurolytic LSGB and radiofrequency thermocoagulation.

• Biomolecules & Therapeutics
• /
• v.7 no.3
• /
• pp.271-277
• /
• 1999

Safety evaluation of LB71350, a new HIV-1 protease inhibitor, was performed in mice, rats and dogs. For the general behavior of mice, LB71350 at an oral dose of 200 mg/kg did not show any significant effects on muscle tone and locomotor activity. In terms of central nervous system, at oral doses of 200 mg/kg and 1000 mg/kg, LB71350 inhibited acetic acid-induced pain response approximately 41% and 83% of control. respectively. At oral doses of 200 mg/kg and 500 mg/kg, it reduced the rectal body temperature in rats. Pentylenetetrazole-induced seizure in mice was slightly potentiated by oral administration of LB71350 at doses ranging from 200 mg/kg to 1000 mg/Ag. Single or five day treatment of LB71350 doubled the hexobarbital- induced sleeping time in mice at oral doses ranging from 50 mg/kg to 500 mg/kg. It did not cause any effects on gastric secretion and acidity in rat at oral doses of 200 mg/kg and 1000 mg/kg and also it did not change intestinal motility in mice up to 1000 mg/kg. Blood coagulation indices such as prothrombin time (PT), activated partial thromboplastin time (aPTT), and thrombin time (TT) in rats were not affected by the treatment of LB71350 up to 500 mg/kg. LB71350 caused no significant effects on the cardiac output, stroke volume, heart rate, and mean blood pressure when infused intravenously to the anesthetized rats and dogs. Taken together, LB71350 at high oral doses caused significant pharmacological effects on the central nervous system and the hexobarbital-induced sleeping time.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.331-341
• /
• 2021

Objectives: The aim of this study was to evaluate the concentrations and relationships of coarse particles with a diameter of 10 ㎛ (PM₁₀) with endotoxins according to the time of measurement in windowless poultry houses. Methods: In this study, measurement was performed on ten windowless poultry houses with a vertically integrated system from July to November. PM₁₀ was measured using personal environmental monitors and polytetrafluoroethylene (PTFE) filters with a 4 L/min-calibrated pump in selected sampling locations (two near the door and two near an exhaust fan). The endotoxin on PTFE filter was analyzed by the LAL turbidimetric method. Results: The range of geometric mean concentrations of PM₁₀ and endotoxins for each of the 38 samples were 0.12-3.30 mg/m³ and 11.9-3553.66 EU/m³, respectively. PM₁₀ and endotoxin concentrations varied by farm, increasing with the decrease in ventilation. The range of the coefficient of determination between PM₁₀ and endotoxin was 0.0009-0.9249. As the atmospheric temperature decreased, it was confirmed that the concentrations of PM₁₀ and endotoxin increased because the volume of ventilation was decreased. Conclusions: Endotoxins were more affected by time of measurement and ventilation than PM₁₀, which means that endotoxins could be an important indicator for intervention programs for improvement of indoor environments.

• The Journal of Korean society of community based occupational therapy
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2017

Objectives : This study was conducted to investigate the activity of the supra and infrahyoid muscles according to the temperature and the amount of water in healthy adults. Methods : The amount of water was set to 3 mL and 20 mL, and the temperature was subdivided into $4^{\circ}C$, $22^{\circ}C$, and $40^{\circ}C$ in order to compare the activity of the supra and infrahyoid muscles in twenty-seven healthy adults. We used the mean value of the activity of the supra and infrahyoid muscles while they were swallowing saliva in order to set the reference voluntary contraction (%RVC). Results : Muscle activity was significantly increased when they swallowed 20 mL of water rather than 3 mL in the left infrahyoid muscles at $4^{\circ}C$, $22^{\circ}C$ and $40^{\circ}C$ (p=.00; p=.00; p=.00), the right infrahyoid muscles at $22^{\circ}C$and $40^{\circ}C$ (p=.01; p=.01), the left suprahyoid muscles at $4^{\circ}C$ (p=.03). Muscle activity of the right suprahyoid muscles was significantly decreased at $40^{\circ}C$ compared to $4^{\circ}C$ and $22^{\circ}C$ when they swallowed 20 mL of water (p=.04). Conclusion : In the future, other variables such as viscosity and taste should be considered, and further studies on patients with impaired nervous system as well as healthy subjects will be needed.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.422-428
• /
• 2000

Optimum analytical conditions of the aluminium ion were established by flow injection analysis. Eriochrome Cyanine R(ECR) dye reacts with the aluminium ion at pH 6.0 to form a complex that exhibits maximum absorption at 535 nm. Reaction conditions including the mixing and the reaction coil length, the concentration and the pH of the buffer solutio, temperature, and injection loop volume were optimized to intro-duce this reaction into flow injection analysis. The results were as follows. A mixing coil length of 0.5 m and a reaction coil length of 4.0 m, the pH 6.0 and 1M of acetate buffer solution, the ECR concentration of 0.56 mM, the reaction temperature of 40$^{\circ}C$, the injection loop volume of 300${\mu}L$ were chosen as optimum conditions. Under these conditions the detection limit of the aluminiumion was less than 0.05 mg/L and the repeatability was better than 1%. A sampling frequency of 24 times for an hour was achieved. Interfering ions such as $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$, and other anions were tested, interference did not occur up to 1,000mg/L of ion concentration and up to 2,CO0mg/L of sulfate ion con-centration. This method was applied for the determination of aluminium ion in tap water and ground water of Jeonju and the Gochang area. The results showed that the aluminium residual in tap water of the Jeonju area was at a mean of 0.478mg/L and that in tap water of the Gochang area was at a mean of 0.278mg/L. Aluminium ion residual of the tap waters in the Jeonju area was higher level than that in the Gochang area. Aluminium residual in the ground water of the Jeonju area was 0.386 mg/L and was lower compared to 0.564 mg/L for the Gochang area.

• Resources Recycling
• /
• v.14 no.2
• /
• pp.19-27
• /
• 2005

The recycling possibility of aluminum waste dross(AWD) as a ceramic raw material of porous light-weight material was examined. A aluminum waste dross was washed 4-7 consecutive times and roasted at 900$^{\circ}% for 1hour as pre-treatments. The properties of the pre-treatment of aluminum waste dross was investigated. It was conformed by XRD result that the spinel crystalline was grown in AWD, after roasting. After the roasted AWD was ground in aqueous state, the sodium hexaphosphate(SHP) as a dispersant which is used for stabilizing the concentrated slurry was added to the AWD slurry. The porous material was prepared by slurry foaming method with surfactant at room temperature. The foamed slurry volumes were 2 and 3 times of the original slurry volume. The properties of porous material with extended volume of 3 times was following: the porosity was about 84%, bulk density was 0.59 g/cm$^3$, the range of pore was from 50 ${\mu}m$ to 500 ${\mu}m$ and mean pore size was about 200 ${\mu}m$. AWD porous material was sintered at 1150$^{\circ}C-1250$^{\circ}C. It was colcluded that AWD was sintered well at 1200$^{\circ}C from material surface observation by SEM.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.259-264
• /
• 2015

For this experiment, specimen was manufactured by injecting polymer and monomer into silicon mold with volume ratio of 2.5:1 based on ISO 20795-2 so that average thickness, width and length of specimen would be maintained as 3.3 mm, 10.0 mm and 65.0 mm, respectively depending on spray on technique. Specimen was divided into 3 groups ($25^{\circ}C$, $40^{\circ}C$, $70^{\circ}C$) depending on polymerization temperature and 10 specimen was manufactured for each group and it was polymerized in water tank of ${\pm}1^{\circ}C$ under the setting condition of polymerization time of 15 minutes and pressure of 3 bar. After keeping specimen in distilled water of $37^{\circ}C$ for over 48 hours before experiment, flexural strength (FS) and elasticity modulus (EM) of specimen being tested by using Intron (3344; Instron; Instron). SPSS ver. 16.0 was used for analysis and post-hoc test of Scheffe was performed after using one-way ANOVA. When comparing mean value of FS of resin for orthodontics, it was represented in the range of 71.500 MPa for $25^{\circ}C$ group, 74.920 MPa for $40^{\circ}C$ group and 76.880 MPa for $70^{\circ}C$ group and difference was shown in the order of $25^{\circ}C$ group <$40^{\circ}C$ group <$70^{\circ}C$ group but such difference was not significant statistically (p=0.052). Result of EM mean value of resin for orthodontics was more polymerization temperature was high, the more was significant difference represented in the order of $25^{\circ}C$ group <$40^{\circ}C$ group <$70^{\circ}C$ group (p<0.039).

• Journal of Chest Surgery
• /
• v.29 no.1
• /
• pp.1-6
• /
• 1996

We developed an experimental model of brain death using dogs. Brain death was induced by increasing the intracranial pressure (ICP) gradually by continuous Infusion of saline through an epidural Foley catheter in 5 mongrel dogs (weight, 18~22kg). Hemodynamic and electrocardiographic changes were evaluated continuously during the process of brain death and obtained the following results. 1. The average volume and time required to induce brain death was 4.8$\pm$1.0ml and 143.0$\pm$30.9minutes respectively. 2. There was a steady rise of the ICP after starting the constant infusion of saline, and ICP rised continuously until the brain death (122.0$\pm$62.5mmHg). After reaching to the maximal value (125.0$\pm$47.7mmHg) at 30 minutes after brain death, the ICP dropped and remained approximately constant at the slightly higher level than the mean arterial pressure (MAP). 3. MAP showed no change until the establishment of brain death and it declined gradually. The peak heart rate reached to 172.6$\pm$35.3/min at 30 minutes after the brain death. 4. Even though the body temperature and all hemodynamic variables, such as cardiac output, mean pulmonary arterial pressure, left ventricular (LV) end-diastolic pressure and LV maximum + dp/dt, were slightly greater than those of basal state, at the point of brain death, there was no statistically significant change during t e process of brain death. 5. There was no remarkable arrhythmias during the experiment except ventricular premature beats which was observed transiently in one dog at the time of brain death. Hemodynamic changes in the brain death model induced by gradual ICP increment were inconspicuous, and arrhythmias were rarely seen. Hyperdynamic state, which was observed at the point of brain death in another brain death model caused by abrupt ICP increase, was not observed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.