• Journal of Life Science
• /
• v.20 no.10
• /
• pp.1519-1524
• /
• 2010

Apigenin (4', 5, 7-trihydroxyflavone), a common dietary flavonoid abundantly present in fruits and vegetables, has shown remarkable anti-proliferative effects against various malignant cell lines. To observe the anti-proliferative effects, oral cavity cancer cell lines, $6{\times}10^3$ cells/well (96 well plate) of KB oral cavity tumor cells were plated and 24 hr later treated with apigenin for one day, after which MTT assay was performed. Apigenin induced cell death in a dose-dependent manner after incubation. Cell viability was significantly decreased in the group treated with 100 ${\mu}M$ apigenin for 24 hr (p<0.05) compared to the control group. To assess apoptosis, the nuclei of KB cells were stained with DAPI. The presence of chromatin condensation in the apigenin treated cells was detected on a fluorescent microscope (${\times}200$). We investigated the in vivo growth inhibitory effects of apigenin on oral cavity cancer KB tumor xenograft subcutaneously implanted in male nude mice. Apigenin was administered to mice by gavage at doses of 25 and 50 mg/kg/day in 0.2ml of PBS. Tumor volume was significantly decreased in 25 and 50 mg/kg apigenin-administration groups compared to the control group. For apoptosis analysis, TUNEL staining was performed. A significant increase in TUNEL positive cells was found in the 25 mg/kg apigenin administration group compared to the non- apigenin administration group. Histopathological changes were not observed. These results indicate that apigenin inhibits oral cavity cancer cell growth through the induction of apoptosis.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.18-24
• /
• 2013

Purpose: Myocardial perfusion SPECT using $^{201}Tl$ is an important method for viability of left ventricle and quantitative evaluation of cardiac function and now various reconstruction methods are used to improve the image quality. But in case of small sized heart, you should always be careful because of the Partial Volume Effect which may cause errors of quantitative indices at the reconstruction step. So, In this study, we compared those quantitative indices of left ventricle according to the reconstruction method of myocardial perfusion SPECT with the Echocardiography and verified the degree of the differences between them. Materials and Methods: Based on ESV 30 mL of Echocardiography, we divided 278 patients (male;98, female;188, Mean age;$65.5{\pm}11.1$) who visited the Asan medical center from February to September, 2012 into two categories; below the criteria to small sized heart, otherwise, normal or large sized heart. Filtered and output each case, we applied the method of FBP and OSEM to each of them, and calculated EDV, ESV and LVEF, and we conducted statistical processing through Repeated Measures ANOVA with indices that measured in Echocardiography. Results: In case of men and women, there were no significant difference in EDV between FBP and OSEM (p=0.053, p=0.098), but in case of Echocardiography, there were meaningful differences (p<0.001). The change of ESV especially women in small sized heard, significant differences has occurred among FBP, OSEM and Echocardiography. Also, in LVEF, there were no difference in men and women who have normal sized heart among FBP, OSEM and Echocardiography (p=0.375, p=0.969), but the women with small sized heart have showed significant differences (p<0.001). Conclusion: The change in quantitative indices of left ventricle between Nuclear cardiology image reconstruction, no difference has occurred in the patients with normal sized heart but based on ESV, under 30 mL of small sized heart, especially in female, there were significant differences in FBP, OSEM and Echocardiography. We found out that overestimated LVEF caused by PVE can be reduced in average by applying OSEM to all kinds of gamma camera, which are used in analyzing the differences.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.347-365
• /
• 2020

In order to resolve traffic problems in urban areas and to increase the area of green spaces, tunnels in downtown areas are being increased. Additionally, the application of large port smoke extraction ventilation systems is increasing as a countermeasure to smoke extraction ventilation for tunnels with high potential for traffic congestion. It is known that the smoke extraction performance of the large port smoke extraction system is influenced not only by the amount of the extraction flow rate, but also by various factors such as the shape of the extraction port (damper) and the extraction air velocity through a damper. Therefore, in this study, the design standards and installation status of each country were investigated. When the extraction air flow rate was the same, the smoke extraction performance according to the size of the damper was numerically simulated in terms of smoke propagation distance, compared and evaluated, and the following results were obtained. As the cross-sectional area of the smoke damper increases, the extraction flow rate is concentrated in the damper close to the extraction fan, and the smoke extraction rate of the damper in downstream decreases, thereby increasing the smoke propagation distance on the downstream side. In order to prevent such a phenomenon, it is necessary to reduce the cross-sectional area of the smoke damper and increase the velocity of passing air through the damper so that the pressure loss passing through the damper increases, thereby reducing the non-uniformity of smoke extraction flow rate in the extraction section. In this analysis, it was found that when the interval distance of the extraction damper was 50 m, the air velocity passing through damper was 4.4 m/s or more, and when the interval distance of the extraction dampers was 100 m, the air velocity passing through damper was greater than 4.84 m/s, it was found to be advantageous to ensure smoke extraction performance.

• Journal of Yeungnam Medical Science
• /
• v.17 no.2
• /
• pp.137-145
• /
• 2000

Background: Hepatocellular carcinomal(HCC) has been considered to be relatively radioresistant. The role of radiotherapy(RT) in the treatment of HCC is controversial. But RT has a role in the treatment of hepatocellular carcinoma as a single or combination modalities. The effect of radiotherapy on HCC was evaluated. Patients and Methods: From January 1984 through January 2000, a total of 18 patients with unresectable HCC underwent radiotherapy alone or in conjunction with transarterial embolization(TAE). We reviewed the medical ecords of patients treated with RT and measured the tumor size using measured the tumor size using planimetry method. The Kaplan-Meier method was used to calculate the survival rate. Results: The RT patients were 15 men and 3 women. The mean age was 51 years. four(22.2%) of them were accompanied with ascites. Eleven(61.1%) of them were accompanied with liver cirrhosis and their functions were 6, 3, 2 in each Child-Pugh A, B, C, respectively. A partial response(PR) was observed in 2 patients(11.1%), minimal response(MR) in 4 patients (22.2%) and no change(NC), in 11 patients(61.1%), whereas progressive disease(PD) was seen in 1 patients(6%), respectively. Conclusions: Although the radiotherapy in HCC did not improve the survival rate. it decreased the tmor size. Radiotherapy strengthens the therapeutic efficacy when combined with TAE, but more studies are needed.

• Clean Technology
• /
• v.22 no.1
• /
• pp.16-28
• /
• 2016

Textile industry is considered as one of the most polluting sectors in terms of effluent composition and volume of discharge. It is well known that the effluents from textile dying industry contain not only chromatic substances but also large amounts of organic compounds and insolubles. The azo dyes generate huge amount of pollutions among many types of pigments. In general, the electrochemical treatments, separating colors and organic materials by oxidation and reduction on electrode surfaces, are regarded as simpler and faster processes for removal of pollutants compared to other wastewater treatments. In this paper the electrochemical degradation characteristics of dye wastewater containing CI Direct Blue 15 were analyzed. The experiments were performed with various anode materials, such as RuO₂/Ti, PtO₂/Ti, IrO₂/Ti and graphite, with stainless steel for cathode. The optimal anode material was located by changing operating conditions like electrolyte concentration, current density, reaction temperature and initial pH. The degradation efficiency of dye wastewater increased in proportion to the electrolyte concentration and the current density for all anode materials, while the temperature effect was dependent on the kind. The performance orders of anode materials were RuO₂/Ti > PtO₂/Ti > IrO₂/Ti > graphite in acid condition and RuO₂/Ti > IrO₂/Ti > PtO₂/Ti > graphite in neutral and basic conditions. As a result, RuO₂/Ti demonstrated the best performance as an anode material for the electrochemical treatment of dye wastewater.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.160-175
• /
• 1984

This study was carried out to analyze the effects of the revolution and forwarding speed of the rotary blade and the edge curves which were $30^{\circ}$ and $40^{\circ}$, on the power requirement of rotary tillage. In this study, the revolutions of the rotary blade considered were 204, 243, 285, 360 rpm, and the forwarding speeds of the rotary system considered were 29.40cm/sec, 46.93em/sec. The power requirements of rotary blade were measured by a dynamic strain gage systems at the soil bin which was filled with artificial soil. The results of the study were summarized as follows: 1. The response surface analysis showed that the revolution and forwarding speed of the rotary shaft had an interacting influence on the torque requirement of the rotary blade. The mathematical model developed by the above was repersented as follow. $$T=a_0+a_1V+a_2R +a_3VR+a_4VR^2$$ where, $a_0=constant$ $a_1,\;a_2,\;a_3,\;a_4=coefficients$ V=forwarding speed of the rotary system. (em/sec) R=revolution of the rotary shaft. (rpm) T=tilling torque requirement. (kg-m) 2. When the maximum tilling torque requirement was analyzed, ${\partial}T/{\partial}R$ was decreased with the increasing revolution of rotary shaft, while ${\partial}T/{\partial}V$ was increased, which was minimum at 200~220 rpm. When the forwarding speeds were increased, ${\partial}T/{\partial}R$ was decreased with increasing rate. 3. When the mean tilling torque requirement was analyzed, ${\partial}T/{\partial}V$ was constant at 320~360 rpm and ${\partial}T/{\partial}R$ was decreased with increasing rate along with the increasing revolution of rotary shaft. 4. When the mean tilling torgue requirement per unit volume of soil was analyzed, ${\partial}T/{\partial}V$ was minimum at 270~300 rpm. ${\partial}T/{\partial}R$ for the forwarding speeds of 29.40cm/sec and 46.93cm/sec was same as that for 280~290 rpm. 5. Increasing the edge curves of the rotary blades, the tilling torque requirement was increased. But other studies showed that the smaller the edge curve, the more straw could be wrapped on blades which resulted in increasing torque requirements. Therefore, the edge curve of rotary blade should be considered for the future study.

• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.47-57
• /
• 2015

Sodium is an essential nutrient with very important functions, including regulation of the extracellular fluid volume and active transport of molecules across the cell membranes. Since high levels of dietary sodium are associated with a high prevalence of hypertension, prehypertension, and other adverse effects on health, many national and international health organizations (WHO, FAO, etc.) recommend that sodium intake should be significantly decreased. In developed nations, cheese products, from among many processed foods, can cause high salt intake. Hence, there is an urgent need to reduce the content of salt in cheese processing, using various substitutes of sodium chloride (NaCl). In general, salt (NaCl) has been used as a food preservative to limit and (or) kill the growth of foodborne pathogens and spoilage organisms by decreasing the water activity, and to improve texture and flavor. To maintain public health, the salt content in cheese should be decreased without influencing the physicochemical properties of cheese. Therefore, the objective of this review is to outline the upcoming technologies used to reduce the salt content in different types of cheese using various substitutes.

• Korean Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.382-394
• /
• 2008

The objective of this study was to analyze temporal trends of water chemistry and spatial heterogeneity between the dam site (Daecheong Reservoir, S1) and the downstream (S2$\sim$S4) using water quality dataset (obtained from the Ministry of Environment, Korea) during 2000$\sim$2007. Water quality, based on eight physical and chemical parameters, varied largely depending on the years, sampling sites, and the discharge volume. Conductivity and nutrients (TN and TP) showed a decreasing trend in the downstream (S4) rather than the dam site during the monsoon. Spatial variation increased toward downstream (S4) from Daecheong Reservoir (S1). Also, BOD and COD increased toward downstream. Because of input of nutrient and pollutant nearby S1, lentic ecosystem in monsoon, BOD and COD were slightly increased. whereas relatively decreased in S4, lotic ecosystem in monsoon, by dilution effect of nutrient and pollutant by discharge from upper dam, S1. Spatial variation of SS increased toward downstream (S4) by the side of Daecheong Reservoir (S1). Based on the dataset, efficient water quality management in the point source tributary streams is required for better water quality of downstream. Monthly characteristics of DO showed the lowest value in the monsoon that tend to increase water temperature. DO was lowest in October at S1 because turbid water, input to the Daecheong Reservoir in the monsoon affect to the postmonsoon period. In contrast, water temperature increased toward summer monsoon, in spite of some differences showed between S1 and S4 environment. Overall, the characteristics of water quality in downstream region have close correlation with discharge amount of Daecheong Reservoir. Thus, those characteristics can explain that discharge control of upper dam mainly affect to the water quality variation in downstream reach.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.225-230
• /
• 2009

The purpose of this study was to determine the effect of re-establish the amount and major pollution source of swine wastewater from swine farms. The results obtained in this study was summarized as follow; The quantity of wastewater produced from the average volume of swine wastewater was $2.49{\ell}$/head/day and $2.49{\ell}$ in spring, $2.65{\ell}$ in summer, $2.47{\ell}$ in autumn, and $2.35{\ell}$ in winter. The quantity of wastewater production during summer season was higher than of the other seasons. The water pollutant concentration in wastewater of swine farms, $BOD_5$, SS, T-N and T-P, was $4,689\;mg/{\ell}$, $2,122\;mg/{\ell}$, $3,238\;mg/{\ell}$ and $118\;mg/{\ell}$, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.1
• /
• pp.111-114
• /
• 2010

Purpose: There has been recent interest in the radioactivity uptake and image acquisition of radioactivity concentration. The degree of uptake is strongly affected by many factors containing $^{18}F$-FDG injection volume, tumor size and the density of blood glucose. Therefore, we investigated how radioactivity uptake in target influences 2D or 3D image analysis and elucidate radioactivity concentration that mediate this effect. This study will show the relationship between the radioactivity uptake and 2D,3D image acquisition on radioactivity concentration. Materials and Methods: We got image with 2D and 3D using 1994 NEMA PET phantom and GE Discovery(GE, U.S.A) STe 16 PET/CT setting the ratio of background and hot sphere's radioactivity concentration as being a standard of 1:2, 1:4, 1:8, 1:10, 1:20, and 1:30 respectively. And we set 10 minutes for CT attenuation correction and acquisition time. For the reconstruction method, we applied iteration method with twice of the iterative and twenty times subset to both 2D and 3D respectively. For analyzing the images, We set the same ROI at the center of hot sphere and the background radioactivity. We measured the radioactivity count of each part of hot sphere and background, and it was comparative analyzed. Results: The ratio of hot sphere's radioactivity density and the background radioactivity with setting ROI was 1:1.93, 1:3.86, 1:7.79, 1:8.04, 1:18.72, and 1:26.90 in 2D, and 1:1.95, 1:3.71, 1:7.10, 1:7.49, 1:15.10, and 1:23.24 in 3D. The differences of percentage were 3.50%, 3.47%, 8.12%, 8.02%, 10.58%, and 11.06% in 2D, the minimum differentiation was 3.47%, and the maximum one was 11.06%. In 3D, the difference of percentage was 3.66%, 4.80%, 8.38%, 23.92%, 23.86%, and 22.69%. Conclusion: The difference of accumulated concentrations is significantly increased following enhancement of radioactivity concentration. The change of radioactivity density in 2D image is affected by less than 3D. For those reasons, when patient is examined as follow up scan with changing the acquisition mode, scan should be conducted considering those things may affect to the quantitative analysis result and take into account these differences at reading.