• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.293-301
• /
• 2008

The purpose of this study is price determination for KLIS (Korea Land Information System) which Korea government established. For this purpose, I analyzed cost accounting and made the KLIS selling price according to selling amount, recovery rate and information volume. In case of recovery rate, the cost was expensive but, in case of information volume the cost was cheap. So, the price determination for KLIS should be resonable according to information volume considering GIS revitalization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.7-19
• /
• 1989

The developments in remote-sensing, digital mapping, and automation of land information system have provided the impetus for the increasing use of Digital Terrain Models in engineering planing and design. In this paper, an evaluation is made on tile method of accurate earth-volume determination in computerized road design using by Digital Terrain Models. The result of numerical test shows that the $BL_{in}$-1 Model is the most efficient model in Earth-volume determination of road design.

• Korean Journal of Remote Sensing
• /
• v.29 no.6
• /
• pp.657-662
• /
• 2013

The comparison between $CO_2$ volume mixing ratios observed by GOSAT and TCCON from September 2009 through November 2012 was performed at Tsukuba and Saga, two downwind sites in East Asia. The temporal trends of $CO_2$ values obtained from GOSAT show good agreement with those observed by TCCON at these two by the TCCON, showing a coefficient of determination ($R^2$) of 0.65. The regression slop we obtained was 0.92, showing a small bias of GOSAT $CO_2$ values compared to those observed by TCCON. However, we found the higher correlation in fall and winter than that in spring and summer. The $CO_2$ volume mixing ratios observ sites. The $CO_2$ volume mixing ratios observed by GOSAT are also in good agreement with those measured ed by GOSAT are in good agreement with those measured by the TCCON at those two sites in fall and winter, showing a coefficient of determination ($R^2$) of 0.66 where as the correlation of determination obtained between GOSAT and TCCON was only 0.27 in spring and summer.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2488-2492
• /
• 2010

A method is described for the determination of the Po nuclides in a water sample. After the Po nuclides were purified from interfering elements in a water sample using a manganese dioxide precipitation followed by a solvent extraction method, the Po nuclides were deposited onto the silver plate. A large volume of the water sample was effectively pretreated with manganese dioxide precipitation method. To determine the optimum conditions for plating Po, the effects of the pH, volume, temperature and time on the Po deposition were investigated in hydrochloric acid solution. The investigated determination method of Po nuclides with solvent extraction was applied to a tap water sample.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.337-340
• /
• 2002

The purpose of this study is to evaluate the loss volume of base soil materials with the grain size range of filter materials for agricultural reservoir. The test results show that the loss volume is increased with the hydraulic pressure, and the amount of loss volume for same sample is different with the filter range.

• Progress in Medical Physics
• /
• v.16 no.4
• /
• pp.183-191
• /
• 2005

The utilization of PET has been increased so fast since the usefulness of the PET has been proved in various clinical and research fields. Among the many applications, the PET Is especially useful in oncology and most of the clinical PET scans are peformed for the oncologic examination Including the different diagnosis of malignant and benign tumors and assessment of the treatment effects and recurrent tumors. As the PET-CT scanners are widely available, there is Increasing interest in the application of the PET Images to the radiation treatment planning. Although the CT images are conventionally used for the target volume determination in the radiation treatment planning, there are fundamental limitation In use of only the anatomical information. Therefore, the volume determination of the functionally active tumor region using the PET would be important for the treatment planning. However, the accurate determination of the tumor boundary is not simple in PET due to the relatively low spatial resolution of the currently available PET scanners. In this study, computer simulations were peformed to study the relationship between the lesion size, PET resolution, lesion to background ratio and the threshold of Image Intensity to determine the true tumor volume.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.107-114
• /
• 2005

The uncertainty of measurement in quantitative analysis of ammonia by continuous-flow analysis method was evaluated following internationally accepted guidelines. The sources of uncertainty associated with the analysis of ammonia were the weighing of sample, the preparation of extracting solution, the addition of extracting solution into the sample, the reproducibility of analysis and the determination of water content in tobacco, etc. In calculating uncertainties, Type A of uncertainty was evaluated by the statistical analysis of a series of observation, and Type B by the information based on supplier's catalogue and/or certificated of calibration. It was shown that the main source of uncertainty was caused by the volume measurement of 1 mL and 2 mL, the purity of ammonia reference material in the preparation of standard solution, the reproducibility of analysis and the determination of water content of tobacco. The uncertainty in the addition of extraction solution, the sample weighing, the volume measurement of 50 mL and 100 mL, and the calibration curve of standard solution contributed relatively little to the overall uncertainty. The expanded uncertainty of ammonia determination in burley tobacco at $95\%$ level of confidence was $0.00997\%$.

• Computers and Concrete
• /
• v.9 no.1
• /
• pp.35-50
• /
• 2012

The 2D representative volume element (RVE) for softening quasi-brittle materials like concrete is determined. Two alternative methods are presented to determine a size of RVE in concrete subjected to uniaxial tension by taking into account strain localization. Concrete is described as a heterogeneous three-phase material composed of aggregate, cement matrix and bond. The plane strain FE calculations of strain localization at meso-scale are carried out with an isotropic damage model with non-local softening.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.18 no.2
• /
• pp.112-120
• /
• 1998

A nondestructive evaluation technique was developed for the quantitative determination of the reinforcement volume fractions in particulate reinforced metal matrix composites. The proposed technique employed a composite micromechanics which accounts for the microstructure of the composite medium together with the measurement of anisotropic electrical conductivity. When the measured conductivity was coupled with the theoretically predicted conductivity, the unknown reinforcement volume fraction was calculated. An analytical model based on the Mori-Tanaka method was described which relates the NDE signatures to the composite microstructure. The volume fractions were calculated using eddy current measurements made on a wide range of silicon carbide particulate ($SiC_p$) reinforced aluminum (Al) matrix composites. The calculated $SiC_p$ volume fractions were in good agreement with the measured volume fractions in the range of 0-30%. The technique was also found to be effective in estimating the total volume percentage of reinforcement and intermetallic compound formed during the processing stage.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.61-70
• /
• 1995

The purpose of this paper is to calculate the excavation volume of unequal interval grid using nonlinear boundary in eathwork volume determination for reclamation of the foreshore. A congruence area formula by first and third equation is compared with trapezoidal, simpson formulas to earthwork volume. And nonlinear spot level method of unequal interval grid is compared with linear and nonlinear spot level method of equal interval grid excavation volume. As a result algorithm of derived area and volume formula should provide a better accuracy than linear and nonlinear spot level currently in use. Practical application of each method to the excavation volume is illustrated by digital elevation model of aerial photogrammetry and model test of aquarium.