• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.179-188
• /
• 2003

The spray characteristics of dual orifice injector were investigated under two different fuels through measurement of SMD, number density and volume flux by using PDPA system. In this experiment, we found out that the droplet size and spray structure are strongly depend on fuel density and viscosity.

• Journal of Welding and Joining
• /
• 제10권2호
• /
• pp.19-31
• /
• 1992

A numerical study was performed to investigate the flow field and the heat transfer characteristics occurring in high power density welding which is important in many fields of engineering applications. A two dimensional quasi-steady state of keyhole welding model is simulated by using the finite volume methods. It is shown that the shape of isothermal line is elliptic and the temperature gradient is very steep compared with other welding method and the welding speed has on welding width and observed beam power.

• 원예과학기술지
• /
• 제19권2호
• /
• pp.179-185
• /
• 2001

원예용 배지의 물리화학적 특성을 파악하기 위해 전세계적으로 다양한 분석 방법이 사용되고 있다. 유럽은 배지 분석방법의 표준화 연구를 지속적으로 수행해왔다. 유럽표준화 위원회에서는 유럽표준방법으로 CEN methods를 최종안까지 제출하였으며 사실상 유럽표준 배지분석방법의 제정을 확립하는 단계에 있다. 물리적 특성 중 건물함량과 수분함량은 건조 후 분석하였고, 실험 가밀도는 일정한 부피에 채워진 시료의 무게로 측정하였다. 가밀도, 진밀도, 공극률, 액상, 기상, 부피 감소율은 double ring과 sand suction table이라는 장치를 사용하여 배지를 포화, 배수시킨 후 건조시켜 분석하였다. 화학적 특성 중 pH와 EC는 부피 기준 1:5로 침출하여 분석하였다. 유기물과 회분함량은 건조와 연소 과정을 통해 분석하였다. CEN methods는 유럽표준방법으로 확립을 앞두고 있으나 더 지속적인 연구가 필요할 것이다.

• The Korean Journal of Ecology
• /
• 제27권1호
• /
• pp.27-33
• /
• 2004

Cryptomeria japonica plantation was monitored every year during 15 years from 1983 to 1997 for stem diameter and volume. The reciprocal equation, 1/Y = A + B/N, was applied to the relationship between cumulative volume Y and cumulative number N from the largest tree in the stand each year. The parameters A and B, which means respectively the reciprocal of an asymptotic value of total stand stem volume and the reciprocal of the maximum stem volume, are related by a power function. The power functional relationship between A and B derived a linear relationship of B-points ( $N_{B}$, $V_{B}$; $N_{B}$ = B/A, $Y_{B}$ = 1/2A) of each Y-N curve on log-log coordinates. The gradient of B-point line was so steep that the Y-N curve moved parallel upward year by year. The time trajectory of mean stem volume (W) and density ($\rho$) provided evidence in favor of the 3/2 power law of self-thinning, because the gradient of W - $\rho$ trajectory on log-log coordinates approximated to -3/2 at the final stage of stand development. On the basis of the results of Y-N curves and W - $\rho$ trajectory, the time trajectory of maximum stem volume $W_{max obs}$ and $\rho$ was derived theoretically. The gradient of $W_{max obs}$ - $\rho$ trajectory on log-log coordinates is calculated to be -0.6105 at the final stage. The gradient of $W_{max obs}$ - $\rho$ trajectory was steeper than that of W - $\rho$ trajectory at the early stage, while the former is gentler than the latter at the later stage.stage.e.age.e.

• KIEAE Journal
• /
• 제15권4호
• /
• pp.45-52
• /
• 2015

Purpose: Foam concrete is the concrete that contains large amount of air voids inside. In general, the density of foam concrete depends on parameters like water/binder ratio, foam volume, aggregate and pozzolan content, etc. Method: In this study, the effect of foam volume and fly ash content on dry density is investigated intensively in order to find the relationship between each parameter and their abilities to counteract with each other. According to the above information, though there are quite a number of studies on the effect micro fiber on foam concrete at low volume fractions, there is still lack of information especially on the high fiber content side. The objective of the second study is to investigate further on the use of micro fiber at higher volume fraction and fill in the lacking information. Beside from this study, the investigation of the effect of micro-fiber (polypropylene) to enhance the properties of foam concrete is also carried out. Result: Of the two variables that are investigated in this study, the foam volume and the fly ash content, show significant effect on the properties of foam concrete. The foam volume tends to decrease the density and strength of foam concrete. In the second part of our study, a large fibre volume fraction is proved to be able to evidently increase the flexural strength of foam concrete up to about 40% due to the effect of fibre bridging over the crack and a significant number of fibres that intercepts the crack surfaces. However, the compressive strength is found to decrease severely due to the occurrence of large pores as the result of fibre being added into concrete mixture.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.863-870
• /
• 2004

The temperature and soot particle measurement technique in a laminar diffusion flame has been studied to investigate the characteristics of soot particle with temperature using a co-flow burner. The temperature distribution in the flame were measured by rapid insertion of a R-type thermocouple and the soot particles by LEM/LIS techniques. In these measurement, soot volume fraction, number density and soot diameters were analyzed experimentally. As a results, the spacial distributions of particle volume fraction, soot diameter, and number density are mapped throughout the flame using the Rayleigh theory for the scattering of light by particles. A laser extinction method was used to measure the soot volume fraction and laser induced scattering method was used to measure the soot particle diameter and number density. Also, we measured temperature without the effect of soot particles attached to the thermocouple junction, which is close to the nozzle. In this result, we found that upstream zone has a unstable flowing in co-flow diffusion flame and the y-axis temperature of flame has a uniform temperature distribution in the most soot volume fraction zone.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1267-1273
• /
• 2004

The temperature and soot particle measurement technique in a laminar diffusion flame have been studied to investigate the characteristics of soot particle with temperature using a co-flow burner. The temperature distributions in the flame were measured by rapid insertion of a R-type thermocouple and the soot particles were detected were detected by LEM/LIS techniques. In these measurement, soot volume fraction, number density and soot diameters were analyzed experimentally. As a results, the spacial distributions of particle volume fraction, soot diameter, and number density are mapped throughout the flame using the Rayleigh theory for the scattering of light by absorbing particles. A laser extinction method was used to measure the soot volume fraction and Laser induced scattering method was used to measure the soot particle diameter and number density. Also, we measured temperature without the effect of soot particles attached to the thermocouple junction, which is close to the nozzle. In this result, we found that upstream zone has a unstable flowing in co-flow diffusion flame and the y-axis temperature of flame has a uniform temperature distribution in the most soot volume fraction zone.

• Journal of Oral Medicine and Pain
• /
• 제45권4호
• /
• pp.83-88
• /
• 2020

Purpose: Growth differentiation factor 11 (GDF11) and myostatin (MSTN) are closely-related transforming growth factor β family members reported to play crucial roles in bone formation. We previously reported that, in contrast to MSTN, GDF11 promotes osteogenesis of vertebrae and limbs. GDF11 has been also reported as an important regulator in tooth development by inducing differentiation of pulp stem cells into odontoblasts for reparative dentin formation. The goal of this study was to investigate the differential roles of GDF11 and MSTN in dental and cranial bone formation. Methods: Micro-computed tomography analysis was performed on cranial bones, including frontal, parietal, and interparietal bones, and lower incisors of wild-type, Gdf11 knockout (Gdf11-/-), and Mstn knockout (Mstn-/-) mice. Tissue volume, thickness, and mineral density were evaluated for both cranial bone and lower incisors. Lower incisor lengths were also measured. Because Gdf11-/- mice die shortly after birth, analysis was performed on newborn (P0) mice. Results: Compared to those of Mstn-/- mice, cranial bone volume, thickness, and mineral density levels were all significantly diminished in Gdf11-/- mice. Tissue mineral density of Gdf11-/- mice were also significantly decreased compared to wild-type mice. Likewise, lower incisor length, tissue volume, thickness, and mineral density levels were all significantly reduced in Gdf11-/- mice compared to Mstn-/- mice. Incisor length was also significantly decreased in Gdf11-/- mice compared to wild-type mice. Mstn-/- mice exhibited mildly increased levels of tissue volume, thickness, and density in cranial bone and lower incisor compared to wild-type mice although statistically not significant. Conclusions: Our findings suggest that GDF11, unlike MSTN, endogenously promotes cranial bone and tooth development.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.195-198
• /
• 1998

In this paper, the physical and the volume resistivity properties due to linear low density polyethylene(LLDPE)/ethylene vinyl acetate(EVA) blends are studied. In order to measure the volume resistivity properties. the micro electrometer is used, the range of temperature and applying voltage are 25 to 120[$^{\circ}C$], form 100 to 1000[V] respectively. From FT-IR spectrum, LLDPE blended with EVA shows an absence of carbonyl and ether groups. From the experimental result of the volume resistivity properties, it is confirmed that the volume resistivity is decreased, which was attributed to the increase of molecular motions with the increase of temperature.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.30-36
• /
• 2016

For the magnetic field analysis or design, it is important to know the behavior of the magnetic field in an interesting space. Magnetic field mapping becomes a useful tool for the study of magnetic field. In this paper, a numerical way for mapping the magnetic field within the cylindrical center volume of magnet is presented, based on the solution of the Laplace's equation in the cylindrical coordinate system. The expression of the magnetic field can be obtained by the magnetic flux density, which measured in the mapped volume. According to the form of the expression, the measurement points are arranged with the parallel cylindrical line (PCL) method. As example, the magnetic flux density generated by an electron cyclotron resonance ion source (ECRIS) magnet and a quadrupole magnet were mapped using the PCL method, respectively. The mapping results show the PCL arrangement method is feasible and convenience to map the magnetic field within a cylindrical center volume generated by the general magnet.