• 펄프종이기술
• /
• 제38권4호
• /
• pp.17-23
• /
• 2006

Paper has fibers and fines network structure and it is strongly affected by interface bond-ing between fibers. Paper structural properties can be determined depending on the inter-fiber bonding. Fines play an important role in Campbell and consolidation effect through wet pressing and drying operations. The fines are essential for the formation of bonds between fibers and for the improvement of strength properties of papers. Since the fines are components of the pulp, there are always two factors to be considered: the quality and quantity of the fines. The quality of fines might be a potential variable to give a more accurate picture of the papermaking potential of the pulp. The object of this study is to investigate the effect of different types of pulp fines on the properties of paper and to access the potential of fines for controlling the bulk of paper. Refined Sw-BKP, Hw-BKP and BCTMP fines were used to investigate the fines effect. Wet-web strength, breaking length, scattering coefficient, and hydrodynamic specific volume, and drying shrinkage were measured. According to the results, chemical and morphological compositions of fines do not strongly affect to wet-web forming by their similar Campbell effect, but strongly affect to drying operation which forms hydrogen bonding among fiber-fines-fiber matrixes. Paper bulk should be controlled by the extent of hydrogen bonding between fibers during drying operation.

• 수산해양기술연구
• /
• 제41권1호
• /
• pp.54-63
• /
• 2005

어군탐지기, 계량어군탐지기, 바이오텔레메터리등 음향을 이용하여 해중의 어군의 정보를 탐색하는 수산음향계측장치의 탐지범위와 그 음향특성에 대해 검토, 분석할 결과를 요약하면 다음과 같다. 1. 탐지범위는 송 ${\codt}$ 수파기 직경, 송파음의 강도의 증가와 함께 저주파로 이동하여 어군탐지기의 경우 20${\sim}$50kHz, 바이오텔레메터리의 경우 40${\sim}$80kHz에서 최대치를 나타내었다. 2. 탐지거리는 주파수의 증가와 함께 증가하였지만, 고주파에서는 흡수계수의 영향으로 급격하게 감소하였다. 즉, 송 ${\codt}$ 수파기 직경, 송파음의 강도, TS의 증가 효과는 저주파에서는 크고 고주파에서는 적은 경향을 나타내었다. 3. 바이오텔레메터리에서는 어군탐지기와 같은 송파의 지향성 이득을 얻을 수 없기 때문에 탐지체적의 최대치가 수파기의 직경과 함께 미소하게 감소하였다. 4. 탐지범위는 주파수 특성에 의한 어군탐지기의 음향산란신호를 분석하건, 수산음향계측장치의 설계 및 성능평가에 유효하게 사용될 수 있다.

• 수산해양기술연구
• /
• 제38권3호
• /
• pp.197-201
• /
• 2002

어군의 기하학적 파라메터를 이용한 어군량 추정에 대한 기초적 연구로서, 소너와 계량어군탐지기를 동시에 사용하여 소너 화상으로부터 어군의 기하학적 파라메터, 면적 및 체적을 계측하고, 계량어군탐지기로 측정한 면적후방산란계수와의 관계를 비교, 분석한 결과를 요약하면 다음과 같다. 1. 면적후방산란계수 (S/sub A/) 는 어군면적 (S/sub F/) 과의 사이에는 S/sub A/ = 78,842 S/sub F/ 0.46의 관계가 성립하였고 어군체적 (V/sub F/)과의 사이에는 S/sub A/= 30,895 V/sub F/ 0.37의 관계가 성립하였으며, 각각의 상관계수는 0.76 이었다. 2 소너로 관측된 어군의 기하학적 파라메터가 어획량이나 계량어군탐지기에 의한 면적후방산란계수와 유의한 상관이 있으면, 이들을 이용한 어군량 추정은 가능할 것으로 판단된다.

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.117-123
• /
• 2009

Caprylic/Capric triglyceride-in-water emulsions stabilized by Nikkol HCO-60 and HCO-10 were prepared using emulsion inversion point method at different HLB values. Emulsions with various droplet sizes were formed, and emulsion inversion point was detected by electrical conductivity. The change in emulsion droplet sizes and long term stability were monitored using laser scattering method and visual method. The droplet sizes and stability of emulsions were affected by HLB of surfactant. At emulsion inversion point, the water volume fraction increased as the HLB of surfactants decreased. According to our analysis, this resulted from a tendency of forming the W/O (water-in-oil) emulsion as the HLB of surfactants was decreased. The emulsion inversion point was clearly detected by the microscope and the electric conductivity meter. Nanometer-sized emulsion was obtained at the optimum HLB by using emulsion inversion point method. The main pattern of instability of emulsions in HLB 12 and 13 systems was Ostwald ripening. However, The patterns of instability of emulsions below 11 of HLB systems were Ostwald ripening and coalescence. All emulsions produced with surfactants in the range of HLB 8-13, creaming caused by density difference between water phase and oil phase.

• 한국수산과학회지
• /
• 제47권5호
• /
• pp.671-681
• /
• 2014

The distribution and abundance of coastal fish species in Asan Bay, Korea, were estimated from hydroacoustic survey and net catches. Acoustic data were collected with 38 and 200 kHz from July to October of 2012, and converted to the nautical area scattering coefficient (NASC, $m^2/mile^2$) for $0.25n{\cdot}mile$ along ten transects. Japanese anchovy Engraulis japonicus was the dominant specie in the net catches. The virtual echogram technique was used to distinguish E. japonicus from other species based on the differences in the mean volume backscattering strength (${\Delta}MVBS$) at 38 and 200 kHz. Engraulis japonicus and other fishes are mainly distributed in the center channel and outer part of Asan Bay. E. japonicus tends to move from inner to outer Asan Bay in summer and fall. From NASC data, the target strength and length-weight function of E. japonicus and other fishes were used to estimate the E. japonicus stock at 24.1-93.3 tons, and other fish at 40.6-88.4 tons from July to October 2012. The estimated anchovy biomass compared well with the cumulative catch weight from stow net catches. The hydroacoustic method offers an approach to understanding spatial/temporal structure and estimating the biomass of fish aggregations in coastal areas.

• 한국수산과학회지
• /
• 제47권3호
• /
• pp.283-291
• /
• 2014

This study assessed dominant fish species, and the characteristics and spatio-temporal distribution of fish schools using acoustic and catch data in the marine ranching area (MRA) of Yeosu in July and August 2013. Acoustic data were collected using a 200-kHz dual beam transducer, and catch data were analyzed through auction data generated by a set net installed in the MRA. More fish schools were detected by acoustic methods in July than in August. The temporal distribution of fish schools differed between July and August, but, many schools demonstrated a high mean volume scattering strength (SV) around artificial reefs. Additionally, the characteristics of fish schools detected by echograms and the species caught by set nets differed between July and August. The dominant fish species were Engraulis japonicus, Pampus argenteus, Scomberomorus niphonius, and Pampus echinogaster in July, and approximately 85% of the catch in August consisted of Scomberomorus niphonius. Therefore, hydro-acoustic tools are useful for estimating fish school characteristics in large areas over a short period. To determine species, it is important to conduct net sampling surveys during the acoustic surveys. However, if a database of fish school characteristics organized by species is constructed through continuous study, it could be possible to identify fish species through acoustic methods alone.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1297-1303
• /
• 2020

In this study, nuclear radiation shielding and rigidity parameters of Y (0.1-x)B0.6Bi1.8O3La2x glassy system were investigated in order to determine it's suitability for use as nuclear radiation shielding materials. Therefore, a group of bismuth borate glass samples with La₂O₃ additive were synthesized using the technique of melt quenching. According to the results, the increase of the La₂O₃ additive increases the density of the glass samples and the mass attenuation coefficient (μ_m) values, whereas the half-value layer (HVL) and mean free path (MFP) values decrease. The effective atomic number (Z_eff) is also enhanced with an increment of both mass removal cross section for neutron (Σ_R) and absorption neutron scattering cross section (σ_abs). In addition to the other parameters, rigidity parameter values were theoretically examined. The increase of La₂O₃ causes some other important magnitudes to increase. These are the average crosslink density, the number of bonds per unit volume, as well as the stretching force constant values of these glass samples. These results are in concordance with the increase of elastic moduli in terms of the Makishima-Mackenzie model. This model showed an increase in the rigidity of the glass samples as a function of La₂O₃.

• 비파괴검사학회지
• /
• 제13권4호
• /
• pp.9-17
• /
• 1994

초음파법은 종래의 금속재료는 물론 최근의 금속 복합재료등과 같은 신소재의 재료특성을 비파괴적으로 평가할 수 있는 일반적인 방법이다. 그러나 이와같은 재료들의 비파괴 특성 평가를 위해 초음파법을 적용시킬 경우 무엇보다도 재료 내부를 전파하는 탄성파의 전파특성에 대한 물리적 현상에 대한 이해가 필수적이다. 본 연구에서는 금속 복합재료의 제조공정에서 일반적으로 많이 발생되는 기지재와 강화재 사이의 계면 문제 및 기지재에 분포하는 강화재의 체적함유율의 변화등에 의한 유효 평면파의 다중 산란 특성을 SiC 입자강화 6061 알루미늄 복합재료에 대해 Lax의 준 결정 근사(quasi-crystalline approximation) 이론 및 소감정리 (extinction theorem)를 기초로 하여 이론적으로 해석하였다. 그 결과 SiC 입자 강화재의 체적 함유율의 변화에 대한 유효 평면파의 위상속도 및 감쇠의 주파수 의존 특성과 금속복합재료에 있어서의 기지재와 강화재 사이의 계면층의 탄성특성에 대한 위상속도의 변화 특성이 명확하게 규명되었다.

• 수산해양기술연구
• /
• 제52권2호
• /
• pp.111-120
• /
• 2016

Acoustic surveys using a scientific echosounder and trawl surveys were concurrently carried out in between Geoje and Tongyeong of the South Sea by season. The anchovy schools were identified by trawling in each station and used for frequency response analysis. Frequency responses of anchovy schools by season and species composition ratio were examined using multi-frequencies (18, 38, 70, 120 and 200 kHz). The frequency response r(f), is one of the acoustic characteristics which means the volume back-scattering strength ratio between a reference frequency and other frequencies. In spring, the r(f) of anchovy schools decreased with increased frequency, with the exception of 120kHz. While, in winter, the r(f) continuously decreased inversely proportional to the increase in frequency. Frequency response of anchovy schools presented a distinctive difference between spring and winter, however it did not different in spife of different species composition ratios in schools.

• 한국재료학회지
• /
• 제13권10호
• /
• pp.683-690
• /
• 2003

The high strength low alloy(HSLA) steels microalloyed with Nb, Ti and V have been widely used as the automobile parts to decrease weight of vehicles. The effects of process conditions are investigated in the aspects of the precipitation behavior and the mechanical properties of HSLA steel microalloyed with Nb and Ti using TEM, SANS and mechanical testing. When Ti was added to a 0.07C-1.7Mn steel which was coiled at $500^{\circ}C$, the specimen revealed the property of higher tensile strength of 853.1 MPa and the stretch-flangeability of 60%. The stretch-flangeability was increased up to 97.8% for coiling temperature above $700^{\circ}C$. The precipitation hardening cannot be achieved in the 0.045C-1.65Mn steel which was the lower density of fine precipitates. However, the 0.07C-1.7Mn steels containing Nb and/or Ti which was coiled at X$/^{\circ}C$ have a high precipitates density of $2${\times}$10^{ 5}$/$\mu$㎥. The high strength of these steels was attributed to the precipitation hardening caused by a large volume froction of (Ti, Nb)C precipitates with a size below 5 nm in ferrite matrix.