• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.189-196
• /
• 2000

A numerical simulation was conducted to analyze the interaction of flame and vortices. The characteristic scales of flame and vortices were limited in the thin laminar flamelet regime. Within this regime, flame is assumed as discontinuity surface and its motion in flow field was described by G-equation instead of full governing equations. Additional approximations include distribution of line volume sources on flame surface to simulate effect of volume expansion. Contrast to previous calculations, current study employed vortex transport equation to evaluate attenuation and smearing of vortices. Two extreme conditions of frozen vortex and frozen flame were considered to validate the current method. Comparison with direct numerical simulation resulted in satisfactory quantitative agreement with higher computational efficiency which warrants the usefulness of the present model in more complex situation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.791-796
• /
• 1987

In this paper, an efficient algorithm to estimate the volume and surface area from ultrasonic imaging and a reconstruction algorithm to generate three-dimensional graphics are presented. The computing efficiency is Improved by using the graph theory and the algorithm to determine proper contour points is performed by applying several tolerances. The search for contour points is limited by the change in curvature in order to provide an efficient search of the minimum cost path. These algorithms are applied to a selected mathematical model of ellipsoid. The results show that the measured value of the volume and surface area for the tolerances of 1.0005, 1.001 and 1.002 approximate to the measured values for the tolerance of 1.000 resulting in small errors. The reconstructed 3-dimensional Images are sparse and consist of larger triangular tiles between two cross sections as tolerance is increased.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.26-34
• /
• 2008

This study presents an aerodynamic design and an experimental performance test of a turbo air compressor consisted of mixed-flow impeller and curved diffuser for the PEM fuel cell vehicle application. Many studies compare the efficiency, cost or noise level of high-pressure and low-pressure operation of PEM fuel cell systems. Pressure ratio 2.2:1 is considered as design target The goal of compressor design is to enlarge the flow margin of compressor from surge to choke mass flow rate to cover the operational envelope of FCV. Large-scale rig test is performed to evaluate the compressor performance and to compare the effects of compressor exit pipe volume to stall or surge characteristics. The results show that the mixed-flow compressor designed has large flow margin, and the flow margin of compressor configuration with small exit volume is larger than that with large exit volume.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.41-48
• /
• 2013

Ice accretion on the solid surface is an importance factor in assessing the performance of aircraft and wind turbine blade. Changes in the external shape due to ice accretion can greatly deteriorate the aerodynamic performance. In this study, a three-dimensional upwind-type second-order positivity-preserving finite volume CFD scheme based on the unstructured mesh topology is developed to simulate two-phase flow in atmospheric icing condition. The code is then validated by comparing with NASA IRT experimental data on the sphere. The present results of the collection efficiency are found to be in close agreement with experimental data and show improvement near the stagnation region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1005-1008
• /
• 2002

The authors introduce 3D display systems developed in our laboratories for recent ten years. Those are mainly realized by several technologies in holography: electro-holography. holographic stereogram, holographic optical elements (HOE) and hologram screen. We are currently focusing the development of 3D projection screen without glasses. Powerful directionality of the light beam is required for 3D projection screen unlike 2D type. We succeeded in achieving the superior diffractive efficiency of hologram screen that is based on the advanced volume holography. This technology is extensively useful to retrieve the Bragg condition of volume hologram in the three-dimensional space. Owing to this technology we could establish the principle of multi-view projection screen and have confirmed the case of 4 viewing points.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.47-53
• /
• 2004

In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.108-113
• /
• 2000

A field study was performed to investigate the effect of water saving irrigation method on water use efficiency and rice yield. The field plot was 40a (40 ${\times}$ 100m) in size and located at Buryangmyun, Kimjae city, Chonbuk province. Field measurements were made during the growing seasons, May to September of the year 1998 and 1990. Irrigation water volume, drainage water volume, rainfall and ponding depth were measured. Irrigation water management practice employed was such that to keep the ponding depth about 3 to 4cm by intermittent irrigation with drying the soil surface until hair cracks emerge before the next irrigation. The amounts of water volume irrigated and drained were measured by pipe flow meter and ponding depth was observed by using a partly buried 120mm diameter PVC pipe. The results showed that the irrigation water depths, the rainfalls, and the drainage depths were 379mm, 458mm, and 448mm in 1988, and 274mm, 819mm, and 736mm in 1990, respectively. The average yield was 590kg per 10a. The water saving irrigation method saved irrigation water by about 20% with higher yield compared with the traditional method.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.68-69
• /
• 2006

When an alloy such as Ni-W is liquid phase sintered, heavy solid W particles sedimentate to the bottom of the container, provided that their volume fraction is less than a critical value. The sintering process evolves typically in two stages, diffusiondriven macrosegregation sedimentation followed by true sedimentation. During macrosegregation sedimentation, the overall solid volume fraction decreases concurrently with elimination of liquid concentration gradient. However, in the second stage of true sedimentation, the average solid volume fraction in the mushy zone increases with time. It is proposed that the true sedimentation results from particle rearrangement for higher packing efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• 한국항만경제학회지
• /
• 제29권2호
• /
• pp.1-17
• /
• 2013

본 논문은 2010년 광양항 선사 인센티브제도의 공정성을 검토하기 위해 공평성과 효율성 기준을 제시하고, 협조적게임이론의 주요 배분규칙인 비례배분규칙과 평등주의 배분규칙을 활용해 바람직한 인센티브 배분방법을 제시하는데 목적이 있다. 2010년 광양항 선사 인센티브제도는 공평성의 기준인 No-envy와 효율성을 만족하지 못하였으며, 동일한 물량을 처리한 선사에게 동일한 인센티브를 지급하는 대칭성도 만족하지 못하였다. 비례배분규칙과 평등주의 배분규칙 가운데 공평성과 효율성, 대칭성, 그리고 누진성 공리를 만족하는 규칙은 균등잉여배분법이며, 공평성과 효율성, 대칭성, 그리고 역진성 공리를 만족하는 규칙은 균등손실배분법인 것으로 분석되었다. 본 논문은 전체처리물량, 증가물량, 그리고 연안물량과 같은 복수의 기준을 사용해 금액을 배분하는 대신 인센티브제도의 특성대로 역진성과 대칭성을 적용하기 위해 단일기준으로 전체처리물량을 사용하였다. 균등손실배분법은 전체처리물량을 기준으로 인센티브금액을 배분할 때 제도의 취지에 맞게 배분할 수 있었다. 향후에는 효율성을 고려하면서 선사들로 하여금 항만간 물량조정의 유인을 없게 하고, 인센티브 종류별 총액을 합리적으로 할당하는 배분제도를 수립해야 할 것이다.