• 한국연소학회:학술대회논문집
• /
• 2000.05a
• /
• pp.189-196
• /
• 2000

A numerical simulation was conducted to analyze the interaction of flame and vortices. The characteristic scales of flame and vortices were limited in the thin laminar flamelet regime. Within this regime, flame is assumed as discontinuity surface and its motion in flow field was described by G-equation instead of full governing equations. Additional approximations include distribution of line volume sources on flame surface to simulate effect of volume expansion. Contrast to previous calculations, current study employed vortex transport equation to evaluate attenuation and smearing of vortices. Two extreme conditions of frozen vortex and frozen flame were considered to validate the current method. Comparison with direct numerical simulation resulted in satisfactory quantitative agreement with higher computational efficiency which warrants the usefulness of the present model in more complex situation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.791-796
• /
• 1987

In this paper, an efficient algorithm to estimate the volume and surface area from ultrasonic imaging and a reconstruction algorithm to generate three-dimensional graphics are presented. The computing efficiency is Improved by using the graph theory and the algorithm to determine proper contour points is performed by applying several tolerances. The search for contour points is limited by the change in curvature in order to provide an efficient search of the minimum cost path. These algorithms are applied to a selected mathematical model of ellipsoid. The results show that the measured value of the volume and surface area for the tolerances of 1.0005, 1.001 and 1.002 approximate to the measured values for the tolerance of 1.000 resulting in small errors. The reconstructed 3-dimensional Images are sparse and consist of larger triangular tiles between two cross sections as tolerance is increased.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.26-34
• /
• 2008

This study presents an aerodynamic design and an experimental performance test of a turbo air compressor consisted of mixed-flow impeller and curved diffuser for the PEM fuel cell vehicle application. Many studies compare the efficiency, cost or noise level of high-pressure and low-pressure operation of PEM fuel cell systems. Pressure ratio 2.2:1 is considered as design target The goal of compressor design is to enlarge the flow margin of compressor from surge to choke mass flow rate to cover the operational envelope of FCV. Large-scale rig test is performed to evaluate the compressor performance and to compare the effects of compressor exit pipe volume to stall or surge characteristics. The results show that the mixed-flow compressor designed has large flow margin, and the flow margin of compressor configuration with small exit volume is larger than that with large exit volume.

• Journal of computational fluids engineering
• /
• v.18 no.2
• /
• pp.41-48
• /
• 2013

Ice accretion on the solid surface is an importance factor in assessing the performance of aircraft and wind turbine blade. Changes in the external shape due to ice accretion can greatly deteriorate the aerodynamic performance. In this study, a three-dimensional upwind-type second-order positivity-preserving finite volume CFD scheme based on the unstructured mesh topology is developed to simulate two-phase flow in atmospheric icing condition. The code is then validated by comparing with NASA IRT experimental data on the sphere. The present results of the collection efficiency are found to be in close agreement with experimental data and show improvement near the stagnation region.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1005-1008
• /
• 2002

The authors introduce 3D display systems developed in our laboratories for recent ten years. Those are mainly realized by several technologies in holography: electro-holography. holographic stereogram, holographic optical elements (HOE) and hologram screen. We are currently focusing the development of 3D projection screen without glasses. Powerful directionality of the light beam is required for 3D projection screen unlike 2D type. We succeeded in achieving the superior diffractive efficiency of hologram screen that is based on the advanced volume holography. This technology is extensively useful to retrieve the Bragg condition of volume hologram in the three-dimensional space. Owing to this technology we could establish the principle of multi-view projection screen and have confirmed the case of 4 viewing points.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.47-53
• /
• 2004

In this experiment the effects of the packing structure of pigment on the surface characteristics (smoothness and gloss) of coated paper are studied. Four different kinds of inorganic pigments(clay), ground calcium carbonate(GCC), two of precipitated calcium carbonates(PCC), and two organic pigments(solid bead and hollow type) were used. The method of measuring the relative sediment volume(RSV) was used to analyze the packing structure of coating layer. The relative sediment volume was measured, using the pressure dewatering dry-cake method(PDDM) and centrifuge method. Also, the particle size distribution of coating pigment was determined. The results showed that small amount of organic pigment, added to inorganic pigment, improved smoothness and its effect was greater when GCC was used as inorganic pigment. The efficiency of organic pigment depended upon the inorganic pigment since the organic pigment is packed in the pores formed by the inorganic pigment.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.108-113
• /
• 2000

A field study was performed to investigate the effect of water saving irrigation method on water use efficiency and rice yield. The field plot was 40a (40 ${\times}$ 100m) in size and located at Buryangmyun, Kimjae city, Chonbuk province. Field measurements were made during the growing seasons, May to September of the year 1998 and 1990. Irrigation water volume, drainage water volume, rainfall and ponding depth were measured. Irrigation water management practice employed was such that to keep the ponding depth about 3 to 4cm by intermittent irrigation with drying the soil surface until hair cracks emerge before the next irrigation. The amounts of water volume irrigated and drained were measured by pipe flow meter and ponding depth was observed by using a partly buried 120mm diameter PVC pipe. The results showed that the irrigation water depths, the rainfalls, and the drainage depths were 379mm, 458mm, and 448mm in 1988, and 274mm, 819mm, and 736mm in 1990, respectively. The average yield was 590kg per 10a. The water saving irrigation method saved irrigation water by about 20% with higher yield compared with the traditional method.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.68-69
• /
• 2006

When an alloy such as Ni-W is liquid phase sintered, heavy solid W particles sedimentate to the bottom of the container, provided that their volume fraction is less than a critical value. The sintering process evolves typically in two stages, diffusiondriven macrosegregation sedimentation followed by true sedimentation. During macrosegregation sedimentation, the overall solid volume fraction decreases concurrently with elimination of liquid concentration gradient. However, in the second stage of true sedimentation, the average solid volume fraction in the mushy zone increases with time. It is proposed that the true sedimentation results from particle rearrangement for higher packing efficiency.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.385-387
• /
• 1994

Optical interconnections are more attractive than electronic interconnections because of their higher speed, freedom from planar constraints, immunity to electromagnetic interference effects and higher interconnection capacity. Volume hologram is one of the best way to implement optical interconnections. Diffraction efficiency and crosstalk effect are very important things for ensuring independent interconnections. Recently, a general systematic method that can handle a large number of superposed volume gratings in anisotropic host material is presented. In this study for numerical analysis of diffraction, above method is programmed in general form near Bragg angle. Diffraction orders for variation of grating strength are determined by comparing with the coupled-mode method. The effects of parameter variation are considered. Parameters include vertical and azimuthal incident angle, wavelength and interaction length. Diffraction analyses are also performed for intra-mode and inter-mode diffractions.

• Journal of Korea Port Economic Association
• /
• v.29 no.2
• /
• pp.1-17
• /
• 2013

This paper aims to review the fairness of carriers' incentive schemes at Gwangyang port in 2010 and to show the desirable incentive allocation rules using the proportional and egalitarian rules under cooperative game theory. The carriers' incentive schemes at Gwangyang port in 2010 did not meet the no-envy and the efficiency, and satisfy the symmetry axiom. According to the research findings, the equal surplus method satisfies the axioms of equity, efficiency, symmetry, and progressivity. However, the uniform losses method meets the axioms of equity, efficiency, symmetry, and regressivity. We use a single allocation criterion of the total throughput to show the regressivity and the symmetry principles into the incentive scheme instead of using multiple criteria such as total throughput, increased volume, and coastal volume. The uniform losses method based on the total throughput can distribute the incentive amount according to the intent of the incentive schemes. Hence, we need to establish a rationing system to allocate reasonably the total amount of different types of incentives, avoiding the temptation to adjust the volume shipped between the ports of carriers considering the efficiency of allocation.