• 설비공학논문집
• /
• 제11권1호
• /
• pp.18-30
• /
• 1999

A heat transfer analysis for the two-dimensional (2-D) steady state using finite difference method (FDM) is performed to predict the thermal behavior of the primary first-wall (FW) system of fusion reactor under various geometric and thermo-hydraulic conditions, such as the beryllium (Be) armor thickness, pitch of cooling tube, and coolant velocity. The FW consists of authentic steel (type 316 stainless steel solution annealed) for cooling tubes, Cu for cooling tubes embedding material, and Be for a protective armor, based on the International Thermonuclear Experiment Reactor (ITER) report. The present 2-D analysis, the control volume discretized with hybrid grid (rectangular grid and polar grid) and Gauss-Seidel iteration method are adapted to solve the governing equations. In the present study, geometric and thermo-hydraulic parameters are optimized with consideration of several limitations. Consequently, it is suggested that the adequate pitch of cooling tube is 22-32mm, the beryllium armor thickness is 10-12mm, and that the coolant velocity is 4.5m/s-6m/s for $100^{\circ}C$ of inlet coolant temperature. The cooling tube should locate near beryllium armor. But, it would be better for locating the center of Cu wall, considering problems of material and manufacturing. Also, 2-D analysis neglecting the axial temperature distribution of cooling tube is appropriate, regarding the discretization error in axial direction.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1533-1540
• /
• 2001

A high-temperature sodium stainless steel heat pipe was fabricated and its performance has been investigated. The working fluid was sodium and it was sealed inside a straight tube container made of stainless steel. The amount of sodium occupied approximately 20% of the total volume of the heat pipe and its weight was 65.7gram. The length of a stainless steel container is 1002mm and its outside diameter is 25.4mm. Performance tests were carried out in a room air condition under a free convective environment and the measured temperatures are presented. The start-up behavior of the heat pipe from a frozen state was investigated for various heat input values between 600W and 1205W. In steady state, axial temperature distributions of a heat pipe were measured and its heat transfer rates were estimated in the range of vapor temperature from 50$0^{\circ}C$ to 63$0^{\circ}C$. It is found that there are small temperature differences in the vapor core along the axial direction of a sodium heat pipe for the high operating temperatures. But for the range of low operating temperatures there are large temperature drops along the vapor core region of a sodium heat pipe, because a small vapor pressure drop makes a large temperature drop. The transition temperature was reached more rapidly in the cases of high heat input rate for the sodium heat pipe.

• International Journal of Fluid Machinery and Systems
• /
• 제9권1호
• /
• pp.1-16
• /
• 2016

Behaviors of surges appearing near the stall stagnation boundaries in various fashions in systems of a single-stage compressor and flow-path systems were studied analytically and were tried to put to order. Deep surges, which enclose the stall point in the pressure-mass flow plane, tend to have either near-resonant surge frequencies or subharmonic ones. The subharmonic surge is a multiple-loop one containing, for example, in a (1/2) subharmonic one, a deep surge loop and a mild surge loop, the latter of which does not enclose the stall point, staying only within the stalled zone. Both loops have nearly equal time periods, respectively, resulting in a (1/2) subharmonic surge frequency as a whole. The subharmonic surges are found to appear in a narrow zone neighboring the stall stagnation boundary. In other words, they tend to appear in the final stage of the stall stagnation process. It should be emphasized further that the stall stagnation initiates fundamentally at the situation where a volume-modified reduced resonant-surge frequency becomes coincident with that for the stagnation boundary conditions, where the reduced frequency is defined by the acoustical resonance frequency in the flow-path system, the delivery flow-path length and the compressor tip speed, modified by the sectional area ratio and the effect of the stalling pressure ratio. The real surge frequency turns from the resonant frequency to either near-resonant one or subharmonic one, and finally to stagnation condition, for the large-amplitude conditions, caused by the non-linear self-excitation mechanism of the surge.

• Tribology and Lubricants
• /
• 제27권6호
• /
• pp.314-320
• /
• 2011

Although swash-plate type axial piston pumps have the merits of wide operating conditions and high efficiency, the characteristics of pressure pulsation and flow ripple which result in system noise generation are on-going problems. This research examined the analytic models of the dynamic oil pressure and flow characteristics in the pump. A new mathematical model which considered the pressure behaviors of each cylinder and discharge piping was developed to analyze the pump pressure and flow. This model also considered the leakages in the clearances which many researchers have ignored so far. Using the developed model, numerical calculations were implemented. The results showed that widely used simple model which considered only a single cylinder can not predict actual discrete flow dynamics and that fluid inertia effect has to be considered in the mathematical model. Several critical parameters were discussed such as port volume and discharge resistance on the assumption that the pipe length is not so long. The effect of leakages was studied on the final stage.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.45-63
• /
• 2016

Fiber metal laminates (FMLs) represent a high-performance family of hybrid materials which consist of thin metal sheets bonded together with alternating unidirectional fiber layers. In this study, the buckling behavior of a FML circular cylindrical shell under axial compression is investigated via both analytical and finite element approaches. The governing equations are derived based on the first-order shear deformation theory and solved by the Navier solution method. Also, the buckling load of a FML cylindrical shell is calculated using linear eigenvalue analysis in commercial finite element software, ABAQUS. Due to lack of experimental and analytical data for buckling behavior of FML cylindrical shells in the literature, the proposed model is simplified to the full-composite and full-metal cylindrical shells and buckling loads are compared with the available results. Afterwards, the effects of FML parameters such as metal volume fraction (MVF), composite fiber orientation, stacking sequence of layers and geometric parameters are studied on the buckling loads. Results show that the FML layup has the significant effect on the buckling loads of FML cylindrical shells in comparison to the full-composite and full-metal shells. Results of this paper hopefully provide a useful guideline for engineers to design an efficient and economical structure.

• Steel and Composite Structures
• /
• 제17권5호
• /
• pp.753-776
• /
• 2014

In this paper, nonlinear vibration and post-buckling analysis of beams made of functionally graded materials (FGMs) resting on nonlinear elastic foundation subjected to thermo-mechanical loading are studied. The thermo-mechanical material properties of the beams are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and to be temperature-dependent. The assumption of a small strain, moderate deformation is used. Based on Euler-Bernoulli beam theory and von-Karman geometric nonlinearity, the integral partial differential equation of motion is derived. Then this PDE problem which has quadratic and cubic nonlinearities is simplified into an ODE problem by using the Galerkin method. Finally, the governing equation is solved analytically using the variational iteration method (VIM). Some new results for the nonlinear natural frequencies and buckling load of the FG beams such as the influences of thermal effect, the effect of vibration amplitude, elastic coefficients of foundation, axial force, end supports and material inhomogenity are presented for future references. Results show that the thermal loading has a significant effect on the vibration and post-buckling response of FG beams.

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.677-688
• /
• 2002

철근콘크리트 기둥의 비선형 이축모멘트-곡률 관계를 추적할 수 있는 이론모델을 개발하였다. 개발된 모델은 피복콘크리트 박리나 또는 최대하중 후 나타날 수 있는 기둥의 모멘트 저항능력의 취성적인 감소도 모사할 수 있다. 개발된 모델을 이용 기둥의 구성재료 특성과 철근의 기하학적 배치가 PM 상관도와 모멘트-곡률에 미치는 영향에 대하여 변수영향을 고찰하고 철근콘크리트 기둥의 연성은 축하중의 크기, 횡방향 철근의 간격 또는 체적에 가장 큰 영향을 받음이 이론적으로 고찰된 ACI PM-상관도와 비교하여 ACI 내진설계 기준에 따라 횡방향 철근이 배근된 기둥의 경우, 축하중과 모멘트에 대한 : (square root of sum of squares)값이 약 10% 증가하였으며 최대 축하중은 약 20% 정도 증가하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제5권1호
• /
• pp.1-9
• /
• 2012

In the turbopump inducer of a liquid propellant rocket engine, cavitation is affected by acceleration that occurs during an actual launch sequence. Since cavitation instabilities such as rotating cavitations and cavitation surges are suppressed during launch, it is difficult to obtain data on the influence of acceleration on cavitation instabilities. Therefore, as a fundamental investigation, in the present study, a three-blade cyclic cascade is simulated numerically in order to investigate the influence of acceleration on time-averaged and unsteady characteristics of cavitation that arise in cascade. Several cases of acceleration in the axial direction of the cascade, including accelerations in the upstream and downstream directions, are considered. The numerical results reveal that cavity volume is suppressed in low cavitation number condition and cavitation performance increases as a result of high acceleration in the axial-downstream direction, also, the inverse tendency is observed in the axial-upstream acceleration. Then, the regions in which the individual cavitation instabilities occur shift slightly to a low-cavitation-number region as the acceleration increases downstream. In addition, in a downstream acceleration field, neither sub-synchronous rotating cavitation nor rotating-stall cavitation are observed. On the other hand, rotating-stall cavitation occurs in a relatively higher-cavitation-number region in an upstream acceleration field. Then, acceleration downstream is robust against cavitation instabilities, whereas cavitation instabilities easily occur in the case of acceleration upstream. Additionally, comparison with the Froude number under the actual launch conditions of a Japanese liquid propellant rocket reveals that the cavitation performance will not be affected by the acceleration under the current launch conditions.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.763-771
• /
• 2011

본 연구에서는 환기용 축류송풍기에 대하여 효율을 목적함수로 하는 수치최적설계를 수행하였다. 유동해석은 삼차원 Reynolds-averaged Navier-Stokes(RANS) 방정식을 통하여 이뤄졌으며, 난류모델로는 Shear Stress Transport 모델을 사용하였다. 최적설계를 위한 설계변수로는 허브비, 날개의 중간 및 팁 스팬에서의 엇갈림각을 사용하였다. 실험계획법으로 라틴하이퍼큐브 샘플링 방법을 사용하여 설계영역 내에서 25개의 실험점을 추출하였다. 최적설계기법인 가중평균대리모델과 삼차원 RANS 해석을 결합하여 수치최적설계를 수행하였으며, 가중평균대리모델로는 WTA1, WTA2 및 WTA3 모델을 사용하였다. 수치 최적설계에 의해 얻어진 최적형상들의 성능을 기준형상과 비교하였으며, 성능이 가장 좋은 모델에 대하여 기준형상과의 내부유동장 비교 및 분석을 통해 성능이 향상된 원인을 규명하였다.

• 한국의학물리학회지:의학물리
• /
• 제8권1호
• /
• pp.17-24
• /
• 1997

선형가속기를 이용한 뇌정위 방사선수술을 시행하기 위하여 PC에서 실행 가능한 치료 계획시스템을 개발하였다. 128 MB RAM 용량의 Pentium Pro 200 MHz의 PC에서 Windows 95를 기반으로 하였으며, Research Systems사의 프로그램 제작 툴인 IDL을 이용하여 프로그래밍 하였다. Brown-Robert-Wells(BRW) 정위틀을 두개골에 고정한 후 전산화단층촬영을 시행하여 얻은 영상데이터를 광자기디스크를 이용하여 PC에서 입력받을 수 있도록 인터페이스를 구축하였다. 영상데이터를 입력시킨 후 각 단면영상에서의 정위틀의 위치를 자동으로 인식하고 정위좌표계를 설정하여 단변영상의 좌표, 기울어짐, 축소율 등을 정확히 계산하여 보정할 수 있다. 좌표계의 설정이 이루어지면 각 단면에서 표적 및 방사선 민감 조직들의 외곽선을 입력, 수정한다. 외곽선의 입력이 종료되면 표적의 중심이 결정되고 방사선 수술을 위한 빔의 설계한다. 빔 설계의 효율성을 위하여 Beam's eye view(BEV) 및 Room's eye view(REV)를 동시에 확인할 수 있도록 개발하였다. 빔의 설계가 끝나면 3 차원적인 선량계산을 시행한다 .5개의 arc로 설계하였을 때 선량계산에 소요되는 시간은 약 1-2 분이었다. 선량분포는 각 단면영상에서 확인할 수 있으며 표적 및 주변 방사선 민감 조직들의 Dose-Volume Histogram(DVH)을 평가하여 선량분포 및 치료계획의 합리성을 정량적으로 분석할 수 있도록 구현하였다. 기본적인 기능을 지원하는 PC 기반의 뇌정위 방사선수술을 위한 치료계획시스템으로 앞으로 임상적용이 가능할 것으로 생각된다.