• The Korean Journal of Physiology
• /
• v.3 no.1
• /
• pp.1-9
• /
• 1969

Relationships between red ceil volume $(^{51}Cr-cell)$, total blood volume (red cell volume divided by hematocrit ratio), and extracellular fluid volume (SCN distribution space) and body weight (ranging between 73 and 384 grams) or lean body mass were studied in 59 nembutalized rats. Lean body mass was determined by means of underwater weighing method on rats clipped and eviscerated. There were positive correlations between body weight or lean body mass and the absolute values (in milliliters) of body fluid volumes. Body fluid volumes expressed on the body weight or lean body mass basis, however, showed negative correlations between body weight (grams) or lean body weight (grams) with one exception. Red cell volume expressed as % lean body mass showed a positive correlation with lean body mass. The other results are summarized as follows: 1. Body density of rats was 1.0561 $(range:\;1.0123{\sim}1.0781)$ and 19.8% body weight of total body fat was obtained. The mean value of lean body mass was 80.2% body weight 2. The correlation between body weight and lean body mass was high, namely, coefficient of correlation was r=.99. 3. The correlation between the absolute value of red cell volume (ml) and body weight showed a high correlation, namely, r= 92 and between the lean body mass coefficient of correlation was r=.93. On a weight basis, red cell volume was 2.67 ml/100 gm body weight or 3.48 ml/100 gm lean body mass. The coefficient of correlation between body weight (grams) and red cell volume (% body weight) was r=-. 30. The coefficient of correlation between lean body mass (grams) and red cell volume (% lean body mass) was r=. 50. Thus, the following regression equation was obtained. Red cell volume (% lean body mass)=. 00243 Lean body mass (gm)+3. 12. 4. Total blood volume was 6.06% body weight or 7.83% lean body mass. The correlation between these blood volume values and body weight or lean body mass were negative, namely, r= -.43 and r=-.42 respectively. 5. Extracellular volume (SCN space) was 30.0% body weight or 37.2% lean body mass. These percentage values showed negative correlations between body weight or lean body mass and coefficients of correlation were r=-.40 and r=-.54 respectively. 6. The rate of increase in body weight or lean body mass is accompanied by a smaller rate of increase in blood volume and extracellular fluid volume. The rate of increase in red ceil volume paralled that of lean body mass.

• Journal of the Korean Society of Costume
• /
• v.57 no.2 s.111
• /
• pp.155-171
• /
• 2007

Exaggerated expressions of contemporary fashion have exceeded historical precedents in volume. The purpose of this study is to understand the aesthetic characteristics of expanded form In contemporary fashion. To take dresses beyond their flat shapes into three-dimensional forms, it was investigated into volume of dresses by using the void and the mass. The void Is rarefied space and the mass is densified space. The void of dresses could be constructed from the boning such as panier and stiff textiles as organza lining. The mass could be constructed from padding. Fold, pleats, twist, and the layering of fabrics show features of both the void and the mass. Contemporary fashion designers relied on the void rather that the mass to make the enormous volume because of the weight of the mass. X-silhouette and the expansion of skirt and sleeve were dominant as the result of accentuating the body with a waistline. However, many of expanded dresses were so voluminous that they obscured the body's outlines. Some forms were strange and shocking. Many designers explored the void and there were a multitude of methods to construct the void: compartments of air, architectural techniques, technical textiles, fold such at origami. The aesthetic consciousness of expanded dresses could be classified into 7 categories, the giant, the dynamic, the deconstructive, the historical, the comedic, the rhythmical, and the technical character.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.4
• /
• pp.13-19
• /
• 2016

PURPOSE : The purpose of this study was to determine whether tredmill exercise increases pulmonary function and decreases body mass index of the 20s obesity. METHOD : Thirty obesity in their 20s were randomly assigned to on experimental group (n=15) or control group (n=15). Over the course of four weeks, the experimental group participated in tredmill exercise for 30 minutes three times per week and the control group participated in auto-med exercise for 30 minutes three times per week. Subjects were assessed pre-test and post-test by measurement of pulmonary function (tidal volume, inspiration reserve volume, expiratory reserve volume, vital capacity) and body mass index. RESULT : Our findings show that the experimental group had significant difference in expiratory reserve volume and vital capacity and body mass index (p<.05). In the comparison of the two groups, the experimental group had higher pulmonary function and lower body mass index than the control group. CONCLUSION : In this study, the experimental group showed greater improvement in pulmonary function than the control group, which indicates that the tredmill exercise is effective at increasing the pulmonary function and body mass index 20s obesity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.133-136
• /
• 2002

It is very important to get a stable and large-capacity organic effusion source for achievement of OLED mass-production equipment. We present an organic effusion source with film uniformity less than ${\pm}$ 5%, the material charge volume, 300cc for $400{\times}400\;mm^2$ substrate. The fine metal shadow mask alignment technology, one of the color forming technique, also have to support more accurate and fast operating in mass-production. In this paper, we will describe the OLED mass-production equipment with the large volume effusion source and the precision shadow mask alignment technique.

• Computers and Concrete
• /
• v.25 no.4
• /
• pp.303-310
• /
• 2020

In this research, a hybrid mathematical model is derived using the higher-order polynomial kinematic model in association with soft computing technique for the prediction of best fiber volume fractions and the minimal mass of the layered composite structure. The optimal values are predicted further by taking the frequency parameter as the constraint and the projected values utilized for the computation of the eigenvalue and deflections. The optimal mass of the total layered composite and the corresponding optimal volume fractions are evaluated using the particle swarm optimization by constraining the arbitrary frequency value as mass/volume minimization functions. The degree of accuracy of the optimal model has been proven through the comparison study with published well-known research data. Further, the predicted values of volume fractions are incurred for the evaluation of the eigenvalue and the deflection data of the composite structure. To obtain the structural responses i.e. vibrational frequency and the central deflections the proposed higher-order polynomial FE model adopted. Finally, a series of numerical experimentations are carried out using the optimal fibre volume fraction for the prediction of the optimal frequencies and deflections including associated structural parameter.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.1
• /
• pp.38-43
• /
• 2012

In the extreme conditions of launch vehicle in a space, such as cryogenic temperature and low-gravity environment, the mass gauging of remaining propellants becomes a difficult problem. Pressure-volume-temperature (PVT) method is one of the attractive mass gauging methods under low-gravity due to its simplicity and reliability. PVT gauging experiment with various mass flow rates of helium injection is carried out with the experimental apparatus creating cryogenic homogeneous condition as the condition of low-gravity. Experimental results are analyzed by a novel PVT gauging analysis method which considers all instantaneous changes of pressure and temperature in the ullage volume with small time intervals. It is observed that the gauging error from the novel PVT gauging analysis is -0.11% with 2 slpm mass flow rate of helium injection.

• Korea Journal of Hospital Management
• /
• v.21 no.1
• /
• pp.51-61
• /
• 2016

This study attempted to investigate how mass media marketing of a hospital influences patient volume. Additionally, the association of patient volume with exposure time and the type of mass media was examined. Data from a university hospital in Bundang (from January 2014 to November 2014) were used. Degree of physicians' mass media marketing was measured by the number of media exposure. Linear mixed model for repeated measures data was run to identify the associations between the number of media exposure and patient volume. First, the number of hospital physician's mass media exposure and new patients and the first visit patients were positively associated. Second, broadcasting media which has relatively significant in patient volume is TV programs such as cultural programs and news. Third, hospital physicians with higher ranks who were exposed to press media receive more patient appointment. Also, nonsurgical hospital physicians who were exposed to press media receive more patients. Fourth, medical treatment activities for hospital staff who hold the rank of Professor in case of making an appearance at press media have relatively increased. Hospital physician's media exposure, particularly TV programs, was significantly related to patient volume for outpatients.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.6
• /
• pp.617-635
• /
• 2012

In this study, correlations between the rock mass permeability before and after grouting & injection volume and the parameters of Q system were investigated on a grouted rock mass tunnel corresponding to rock class 4 and 5 in terms of Q classification system. As a result, it appears that the lower the Q value is, the higher the before-grouting permeability becomes and the smaller the injection volume of grouting becomes. Also RQD and Jn are the most influencing factors to the permeability of rock mass and the injection volume of grouting. In addition, it turned out that it was very difficult to lower the permeability of rock mass smaller than $1.0{\times}10^{-8}$ m/sec with the ordinary portland cement grout.

• Journal of Mechanical Science and Technology
• /
• v.20 no.6
• /
• pp.840-848
• /
• 2006

We carried out numerical studies to investigate the single- and two-phase flow characteristics in the single- and multi-channels. We used the finite volume method to solve the mass and momentum conservation equations. The volume of fluid model is used to predict the two-phase flow in the channel. We obtained the distribution of velocity fields, pressure drop and air volume fraction for different water mass flow rates. We also calculated the distribution of mass flow rates in the multi-channels to understand how the flow is distributed in the channels. The calculated results for the single- and two-phase flow are partly compared with the present experimental data both qualitatively and quantitatively, showing relatively good agreement between them. The numerical scheme used in this study predicts well the characteristics of single-and two-phase flow in a multi-channel.

• Journal of the Korean Dietetic Association
• /
• v.19 no.2
• /
• pp.103-111
• /
• 2013

In this study, we examined chewing frequency, eating rates, and food consumption volume according to the body mass index of male and female college students. Twenty-five male college students were divided into a normal weight male group (<23 body mass index, n=14) and an obese male group (${\geq}23$ body mass index, n=11). Twenty-five female college students were divided into a normal weight female group (<23 body mass index, n=21) and an obese female group (${\geq}23$ body mass index, n=4). Subjects were provided with abundant fried rice and allowed to consume it at their own pace. Chewing frequency, total mealtime, rate of eating, consumption volume, calorie intake, and the amount of one bite were measured. There were no significant differences in chewing frequency, total mealtime, rate of eating, consumption volume, calorie intake, and the amount of one bite between the normal and obese male groups. There were also no significant differences in chewing frequency, consumption volume, calorie intake, and the amount of one bite between the normal and obese female groups. However, the obese female group had a significantly shorter mealtime and significantly higher eating rate compared with the normal group. Thus, our study suggests that females who eat a meal for a longer time may reduce their food intake, consequently inducing body weight loss.