• 융합정보논문지
• /
• 제11권6호
• /
• pp.7-13
• /
• 2021

본 논문에서는 IT기기에 사용되는 마이너스 전압을 생성할 때 이를 기동하는 기능과 과부하를 감지해 이에 대처하는 기능을 마이크로컨트롤러를 이용해 제어하는 방법을 제시하였다. 이를 위해 기존의 마이너스 전압 생성회로가 가지는 제약점 및 과부하시 발생되는 문제점을 분석하고, 별도의 전류감지 회로 없이 과부하 상태를 검출해 제어하는 방법을 제시하였다. 제시한 방법의 효과를 확인하기 위해 실험회로를 구성하여 실험을 진행한 결과 기존의 마이너스 전압 생성회로에서는 과부하시 래치-업 상태로 돌입해 회로가 위험한 상태로 진입하는 것에 비해 제시한 회로는 이를 감지해 회로의 동작을 차단하고 이러한 이상상태를 사용자에게 알려 조치를 취할 수 있으며, 회로의 기동시점을 시스템 상태에 맞춰 결정하므로 기동시간이 타임스위치 방식에 비해 약 23%정도로 크게 단축되는 실험결과를 확인하였다.

• 한국광학회지
• /
• 제8권2호
• /
• pp.116-121
• /
• 1997

주위온도에 따른 레이저다이오드의 광출력의 변화는 정전류로 구동하는 경우와 정전압으로 구동하는 경우에 서로 다르다. 레이저다이오드를 정전류로 구동하는 경우에는 온도증가에 따라 밀도반전이 감소하므로 광출력이 감소한다. 그러나 정전압으로 구동하는 경우에는 이러한 열효과에 의한 광출력의 감소이외에 내부저항과 임계전압의 감소에 의한 주입전류의 증가효과가 있어서 열효과를 일부 상쇄하므로 광출력의 변화가 정전류로 구동할 때보다 적다. 특히 정전압으로 레이저다이오드를 구동하는 경우에 이 두가지 효과에 의한 광출력의 변화폭이 비슷하여 서로 상쇄되는 동작점 부근에서는 온도에 따른 광출력의 변화가 아주 적어져 정전류로 구동하는 때보다 훨씬 광출력이 안정함을 실험적으로 확인하였다.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.369-372
• /
• 2017

This paper presents a control scheme for three-level NPC inverters using small DC-link capacitors. To reduce the inverter system volume, the film capacitor with small capacitance is a promising candidate for the DC-link. When small capacitors are applied in a three level inverter, however, the AC ripple component increases in the DC-link NPV (neutral point voltage). In addition, the three-phase input grid currents are distorted when the DC-link capacitors are fed by diode rectifier. In this paper, the additional circuit is applied to compensate for small capacitor systems defect, and the offset voltage injection method is presented for the stabilization in NPV. These two proposed processes evidently ensure the quality improvement of the input grid currents and output load currents. The feasibility of the proposed method is verified by experimental results.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.854-859
• /
• 2018

This paper describes the characteristics of a hybrid supercapacitor module for power quality stabilization. Hybrid supercapacitor is an promising energy storage device that positioned between conventional EDLC and Li-ion battery. A cylindrical 7500F hybrid supercapacitor ($60{\times}138mm$) was assembled by using the $Li_4Ti_5O_{12}$ electrode as an anode and activated carbon as a cathode. Considering the ESR and efficiency has been designed to module with 41.6F 480V design results in 180 series combination. In order to determine the characteristics of the hybrid supercapacitor module for power system, hybrid supercapacitor cells were connected in series with active balancing circuit. As a result of measuring the 50kw UPS, it was discharged at the current of 104A~143A during the discharge in the voltage range of 350V~480V, and the compensation time at discharge was measured to be about 30s. These results can be used to stabilization of power quality by applying hybrid supercapacitor module.

• 전기학회논문지P
• /
• 제51권2호
• /
• pp.60-67
• /
• 2002

This paper presents a control approach for designing a self tuning fuzzy controller for a synchronous generator excitation and SVC system. A combination of thyristor-controlled reactors and fixed capacitors (TCR-FC) type SVC is recognized as having the most flexible control and high speed response, which has been widely utilized in power systems, is considered and designed to improve the response of a synchronous generator, as well as controlling the system voltage. The proposed parameter self tuning algorithm of fuzzy controller is based on the steepest decent method using two direction vectors which make error between inference values of fuzzy controller and output values of the specially selected PSS reduce steepestly. Using input-output data pair obtained from PSS, the parameters in antecedent part and in consequent part of fuzzy inference rules are learned and tuned automatically using the proposed steepest decent method. The related simulation results show that the proposed fuzzy controller is more powerful than the conventional ones.

• ETRI Journal
• /
• 제39권2호
• /
• pp.292-299
• /
• 2017

We propose pulse-mode dynamic $R_on$ measurement as a method for analyzing the effect of stress on large-scale high-power AlGaN/GaN HFETs. The measurements were carried out under the soft-switching condition (zero-voltage switching) and aimed to minimize the self-heating problem that exists with the conventional hard-switching measurement. The dynamic $R_on$ of the fabricated AlGaN/GaN MIS-HFETs was measured under different stabilization time conditions. To do so, the drain-gate bias is set to zero after applying the off-state stress. As the stabilization time increased from $ 0.1{\mu}s$ to 100 ms, the dynamic $R_on$ decreased from $160\Omega$ to $2\Omega$. This method will be useful in developing high-performance GaN power FETs suitable for use in high-efficiency converter/inverter topology design.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.19-30
• /
• 2016

In this study, realize voltage regulation $220Vac{\pm}10%$ or less, frequency fluctuation $60Hz{\pm}1%$ or less over the independent operation and grid-connected operation technologies for power stabilization relates to the ESS designed and manufactured in conjunction with solar installations and solar to compensate the output reduction due to the polarization of the solar module through the polarization prevention technology for preventing the optical module efficiency is lowered, in conjunction with the BMS inverter efficiency was more than 92%, more than 90% of the charging efficiency to the target. This study was designed in conjunction with the ESS solar power plants, grid-connected operation and independent operation, Peak-Cut, it can stabilize the grid via the Peak-Shifting operation

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.209-211
• /
• 2002

A simple-structured thermal plasma generator for waste gas treatment has been studied. The thermal plasma technology applied to waste treatment has undoubtedly gained high importance owing to its outstanding properties such as flexibility, compact reactor, and clean treatment. Moreover, the thermal plasma generated by ac power has some additional advantages such as simple electrode system and easy maintenance. A prototype 200kW class plasma generator with specifications of 10-30m/sec gas velocity and 3000-5000K temperature on the center just outside of the nozzle has been designed and tested. Case studies on heat transfer, heat flow, velocity distribution, and temperature distribution using a commercial simulation package show lots of flexibility in design. The experimental results from theprototype generator show that the ac thermal plasma is easily controlled by working gas flow once it is ignited. A stabilization condition is discussed with the data from monitoring arc voltage drops with respect to gas flow rate during the test.

• 한국지능시스템학회논문지
• /
• 제8권2호
• /
• pp.117-127
• /
• 1998

전력계통은 번개, 폭우, 고장등이 여러요인으로 인해 변화하는 동특성을 갖는다. 전송선로의 리액터스가 사고로 인해 변하는 것도 그 대표적인 예이며 전력게통에 불확성을 야기시키는 원인이 된다. 이경우, 이와같은 불확실성에 대해 견실한 성능을 발휘하는 제어기가 필요하다. 한편, 최근의 연구들을 통해 비파라미터적인 불확실서을 갖는 계통에 대해 퍼지제어기가 우수한 성능을 발휘함이 입증되었다. 따라서, 본 논문에서는 선로의 고장 발생시, 전력계통의 발전기 단자전압을 일정값으로 유지하며 계통을 안정화시킬 수 있는 적응퍼지제어기를 궤환선형화 기법에 근거하여 설계하고자 한다. 아울러 본 논문에서는 불확실한 계통에 있어서, 리아프노프 안정도를 보장 받기우해 필요한 불확실한 항의 상계를 퍼지계통에 으해 추정하는 방법을 제안한다. 시뮬레인션 결고, 설계된 제어기가 선로고장에도 불구하고 계통의 전압유지와 과도 안정도를 잘 보장해 줌을 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.228-238
• /
• 2010

There is an increasing interest in research to help overcome the energy crisis that has been focused on energy storage applications in various parts of power systems. Energy storage systems are good at enhancing the reliability or improving the efficiency of a power system by creating a time gap between the generation and the consumption of power. As a contribution to the various applications of storage devices, this paper describes a novel algorithm that determines the power and storage capacity of selected energy storage devices in order to improve upon railroad system efficiency. The algorithm is also demonstrated by means of simulation studies for the Korean railroad lines now in service. A part of this novel algorithm includes the DC railroad powerflow algorithm that considers the mobility of railroad vehicles, which is necessary because the electric railroad system has a distinct distribution system where the location and power of vehicles are not fixed values. In order to derive a more accurate powerflow result, this algorithm has been designed to consider the rail voltage as well as the feeder voltage for calculating the vehicle voltage. By applying the resultant control scheme, the charging or discharging within a specific voltage boundary, energy savings and a substation voltage stabilization using storage devices are achieved at the same time.