• Journal of Electrochemical Science and Technology
• /
• 제10권1호
• /
• pp.1-13
• /
• 2019

Na-ion batteries are being considered as promising cost-effective energy storage devices for the future compared to Li-ion batteries owing to the crustal abundance of Na-ion. However, the large radius of the Na ion result in sluggish electrode kinetics that leads to poor electrochemical performance, which prohibits the use of these batteries in real time application. Therefore, identification and optimization of the anode, cathode, and electrolyte are essential for achieving high-performance Na-ion batteries. In this context, the current review discusses the suitable high-voltage cathode materials for Na-ion batteries. According to a recent research survey, sodium vanadium fluorophosphate (NVPF) compounds have been emphasized for use as a high-voltage Na-ion cathode material. Among the fluorophosphate groups, $Na_3V_2(PO_4)_2F_3$ exhibited the high theoretical capacity ($128mAh\;g^{-1}$) and working voltage (~3.9 V vs. $Na/Na^+$) compared to the other fluorophosphates and $Na_3V_2(PO_4)_3$. Here, we have also highlighted the classification of Fluorophosphates, NVPF composite with carbonaceous materials, the appropriate synthesis methods and how these methods can enhance the electrochemical performance. Finally, the recent developments in NVPF for the application in energy storage devices and its outlook are summarized.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.227-230
• /
• 2002

The switching device in an inductive circuit is stressed by the over-voltage at the turn-off time. Thus if the peak value of the over-voltage is not properly limited, the switching device may be broken. Therefore, the snubber circuit should be added to protect the switching device from the over-voltage. The circuit designer must be familiar with the design of the snubber This paper tests the possibility that TVS instead of the conventional snubber can be applied to the protection circuit of the switching device without using the complicated design equations, and shows that the rating of TVS can be easily selected by considering only several parameters of TVS. The experimental results show the reduced switching voltage of the switching device at the turn-off time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.287-289
• /
• 1994

This paper deals with the planar-type electric field sensor which can measure the time-varying electric fields. The theoretical principle and design rule of the sensor are introduced, and also the calibration and application investigations are carried out. From the calibration experiments, the frequency bandwidth of the measurement system ranges from 160 [Hz] to 25 [MHz]. At a high voltage laboratory, the electric fields caused by the impulse voltage and oscillating transient voltage are measured by the proposed sensor. Obtained results are well agreement with the applied voltage waveforms.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.65-72
• /
• 2019

Dual porous structures are observed for the first time on a metallic Cu surface underneath anodic Cu oxide by the application of an anodizing voltage to Cu in oxalic acid. The as-prepared porous Cu surface contains macropores of less than $1{\mu}m$ diameter and mesopores of about tens of nanometers diameter with circular shapes. The size and density (number of pores/area) of the macropores are dependent on the applied voltage. It is likely that the localized dissolution (corrosion) of Cu in oxalic acid under the anodizing voltages is responsible for the formation of the mesopores, and the combination of a number of the mesopores might create the macropores, especially under a relatively high anodizing voltages or a prolonged anodizing time. The variations of pore structure (especailly macropores) with applied voltage and time are reasonably explained on the basis of the proposed mechanism of pore formation.

• 조명전기설비학회논문지
• /
• 제23권4호
• /
• pp.92-100
• /
• 2009

본 논문은 순간전압강하 추계적 평가를 위한 윈도우즈 프로그램을 소개한다. 개발된 프로그램을 통해 발전기 운전 스케줄링, 시변 사고율 및 부하 전압 민감도 특성을 고려한 순간전압강하 평가가 가능하다. 고장 계산, 취약지역계산, 순간전압강하 발생 횟수 추산 등 다양한 분석 기능들을 가지고 있으며 컴퓨터 그래픽과 애니메이션을 이용한 효과적인 데이터 시각화 기능도 제공하고 있다. 본 논문에서는 순간전압강하 평가의 개념과 발전기 스케줄링 및 시변 사고율을 고려한 순간전압강하 평가 방법에 대한 내용도 기술한다. 또한 개발된 프로그램을 이용한 사례 연구를 통해 순간전압강하 평가에 있어서의 발전기 운전 스케줄링 및 시변 사고율의 영향을 파악한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.97-97
• /
• 2010

A new electric application method was developed to prepare epoxy/organoclay nanocomposite for the electrical insulation in the AC electric fields and it could be also used in the field of various viscous polymer/organoclay systems. The applied AC electric field condition was as follows; (1) inter-electrode distance: 40 mm, (2) application voltage: 3-11 kV, (3) frequency: 60~1,000 Hz, and (4) application time: 0~60 min. To characterize the epoxy/clay nanocomposite, WAXS and TEM analyses were confirmed. In order to explain how the organic modifier affects the exfoliation phenomena, a mechanism of the oscillating collision of the quaternary ammonium head was proposed and the effects of the AC voltage and frequency and the organoclay content were studied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.130-132
• /
• 2001

We have investigated current-voltage (I-V) characteristics of organic light-emitting diodes based on $TPD/Alq_3$ organics depending on the application of forward-reverse bias voltage. Luminance-voltage characteristics and luminous efficiency were measured at the same time when the I-V characteristics were measured. We have observed that the I-V characteristics shows a current mxima at low voltage, which is possibly not related to the emission from $Alq_3$.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.529-531
• /
• 2005

This paper proposes a compact pulse generator fur NOx removal application for diesel automotive. The rising time is important factor to increase NOx removal efficiency in pulsed corona discharge method. Manufacturing cost and compactness of the pulse power generator should be satisfied for automotive application. The proposed pulse power uses a low voltage thyristor, a pulse transformer with the function of saturated magnetic switch, and series connected general diodes as opening switch to satisfy that requirements. With 200 resistor load, the experiment results show that the output voltage is 21kV, the rising time is about 21ns, and the pulse width (FWHM) is about 42ns.

• 한국세라믹학회지
• /
• 제20권1호
• /
• pp.70-78
• /
• 1983

This paper discusses the application of Si-Borosilicate glass sealing to a new sealing method which utilizes a large electrostatic field to pormote bound formation at relatively low temperature. Bonding mechanism and the effect of bonding time bonding temperature glass thickness and surface roughness on the bond strength were investigated. Application of a de voltage across bonded specimen gradually produced a layer of glass adjacent silicon which was depleted of mobile ions. As a consequence a n increasingly larger fraction of the applied voltage appeared across the depleted region and very large electric field resulted This field accompanyed by large electrostatic force acted as driving force the of strong bond. And stronger bond was formed with increasing bonding time and temperature. A low temperature preoxidation is advantageous for the Si surface having a rougher surface finish that 1 microinch.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.214-217
• /
• 1992

This paper introduces a new methodology to apply the interpolation technique wi th optimum pattern to voltage-reactive power control of power system. The conventional tool for the optimal operation of power system is Optimal Power Flow(OPF) by standard optimization techniques. The achievement of solution through OPF programs has a defect of computation time, so that it is impossible to apply the OPF programs to the real-time control area. The proposed method presents a solution in a short period of time and an output with a good accuracy. The optimum pattern is a set of input-output pairs, where an input is a load level and a type of outage and an output is the result of OPF program corresponding to the input. The output in the OPF represents control variables of voltage-reactive power control. The interpolation technique is used to obtain the solution for an arbitrary input. As a result, the new technique helps operators in the process of the real-time voltage-reactive power control in both normal and emergency operating states.