• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.941-951
• /
• 1994

본 연구에서는 국내에서 사용되고 있는 보조기층재료에 대해 변형측정정치의 위치 및 포화도에 따른 $M_R$값의 변화양상을 파악하고, 시료내의 입자크기(particle size)에 따른 치수효과(size effect)를 파악하여 적절한 $M_R$ 관계식을 제시하였다. 외부변형측정장치를 사용한 경우의 $M_R$값은 회복변형율을 과대평가 하기 때문에 내부변형측정장치를 사용한 경우보다 작았고, 포화도에 따른 $M_R$값은 wet 상태($S_r$=70%)가 damp 상태 ($S_r$=40%)보다 10% 정도 작게 나타났으며 시편을 구성하는 입자의 치수효과는 과대 입자(oversize particle)를 제거함에 따른 간극비의 변화와 직접적인 관계가 있음을 알 수 있었다. 이와같은 결과를 종합하여 보조기층의 $M_R$ 관계식은 damp 상태의 포화도에서, $M_R=3960{\cdot}{\theta}^{0.60}$ psi.로 제안할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.197-198
• /
• 2006

In the solid freeform fabrication (SFF) system using selective laser sintering (SLS), polyamide-12 powder is currently recognized as general material. In this study, some kinds of polyamide-6 powders with different shape and particlesize were fabricated to investigate the formability, the microstructure and mechanical properties. Also, to develop a more elaborate and rapid system, this study employs a new SLS device with a 3-axis dynamic focusing scanner system instead of the existing fe lens used in commercial SLS. Polyamide-6 powders having the average size of 100 m were treated thermally in order to keep the spherical symmetry in shape. These polyamide-6 powders were mixed with polyamide-12 powders having the average size of 50 m to give the bimodal distribution of size. These mixed powders showed the better fabrication in the selective laser sintering process because the smaller particles of polyamide-11 played an important role in the compact packing of powders by filling the void space between the large particles of polyamide-6. Also, Experiments have performed to evaluate the effect of a scanning path and sintering parameters by fabricating the various 3D objects.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.2.1-2.11
• /
• 2022

Objectives: This study investigated the impact of micro-computed tomography (micro-CT)-based voxel size on the analysis of material/dentin interface voids and thickness of different endodontic cements. Materials and Methods: Following root-end resection and apical preparation, maxillary premolars were filled with mineral trioxide aggregate (MTA), Biodentine, and intermediate restorative material (IRM) (n = 24). The samples were scanned using micro-CT (SkyScan 1272; Bruker) and the cement/dentin interface and thickness of materials were evaluated at voxel sizes of 5, 10, and 20 ㎛. Analysis of variance and the Tukey test were conducted, and the degree of agreement between different voxel sizes was evaluated using the Bland and Altman method (p < 0.05). Results: All materials showed an increase in thickness from 5 to 10 and 20 ㎛ (p < 0.05). When evaluating the interface voids, materials were similar at 5 ㎛ (p > 0.05), while at 10 and 20 ㎛ Biodentine showed the lowest percentage of voids (p < 0.05). A decrease in the interface voids was observed for MTA and IRM at 20 ㎛, while Biodentine showed differences among all voxel sizes (p < 0.05). The Bland-Altman plots for comparisons among voxel sizes showed the largest deviations when comparing images between 5 and 20 ㎛. Conclusions: Voxel size had an impact on the micro-CT evaluation of thickness and interface voids of endodontic materials. All cements exhibited an increase in thickness and a decrease in the void percentage as the voxel size increased, especially when evaluating images at 20 ㎛.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.145-154
• /
• 2017

In geological engineering, grouting with Portland cement is a common technique for ground improvement, during which micro-fine cement is applied as a slurry, such that it intrudes into soil voids and decreases soil porosity. To determine the utility and behavior of cements with different Blaine values (index of cement particle fineness) for stabilization of fine sand, non-destructive and destructive tests were employed, such as laser-ray determination of grain size distribution, and sedimentation, permeability, and compressive strength tests. The results of the experimental study demonstrated a suitable mix design for the upper and lower regions of the cement-grading curve that are important for grouting and stabilization. Increasing the fineness of the cement decreased the permeability and increased the compressive strength of grouted sand samples considerably after two weeks. Moreover, relative to finer (higher Blaine value) or coarser (lower Blaine value) cements, cement with a Blaine value of $5,100cm^2/g$ was optimal for void reduction in a grouted soil mass. Overall, study results indicate that cement with an optimum Blaine value can be used to satisfy the designed geotechnical criteria.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.259-259
• /
• 2009

Surface contamination and leakage current have caused operating problems. A flashover in a substation may result in destruction of an insulator or many others electrical equipment. Engineering plastics have good characteristic (light weight, good productivity and little of void) as compare with epoxy or porcelain insulators. Outdoor insulator must have resistance to contamination. However, they are not suited to outdoor insulator by reason of being not good hydrophobic. RTV has a good property of hydrophobic and ATH has characteristic obstructing exothermic reaction. In order to reduce the incidence of insulator flashover and damage, the silicon rubber contained nano size ATH coat on surface of engineering plastics. In this paper, it compares resistance tracking of the engineering plastic coated RTV with that of non-coated engineering plastic and ATH filled composites performed much better than non-filled composites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1449_1450
• /
• 2009

Surface contamination and leakage current have caused operating problems. A flashover in a substation may result in destruction of an insulator or many others electrical equipment. Engineering plastics have good characteristic (light weight, good productivity and little of void) as compare with epoxy or porcelain insulators. Outdoor insulator must have resistance to contamination. However, they are not suited to outdoor insulator by reason of being not good hydrophobic. RTV has a good property of hydrophobic and ATH has characteristic obstructing exothermic reaction. In order to reduce the incidence of insulator flashover and damage, the silicon rubber contained nano size ATH coat on surface of engineering plastics. In this paper, it compares resistance tracking of the engineering plastic coated RTV with that of non-coated engineering plastic and ATH filled composites performed much better than non-filled composites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.941-943
• /
• 1998

Exploitation of equipment with cross linked polyethylene (XLPE) insulation requires its condition monitoring and diagnostic. Traditionally diagnostics of insulation is carried out by means of partial discharge detection. Many researchers have developed a lot of methods to identify the defect by the PD form. However, such identification of a defect, for example, void, inclusion or treeing, does not say about its danger from a point of view of full insulation gap breakdown and insulation construction failure. The information about the form and size of formed upon high voltage treeing is necessary for prediction of the remained resource of XLPE insulation. For this purpose we carry out experimental research for determination of the dependencies between PD characteristics in XLPE upon time and three dimension PD patterns of corresponding treeing. The investigations were carried out by means of electrical measurement of PD current and simultaneous optical recording of treeing image. Test results show that the PD patterns can be applied for detecting tree growth well.

• 마이크로전자및패키징학회지
• /
• 제14권3호
• /
• pp.37-42
• /
• 2007

반도체 소자의 집적도가 높아짐에 따라 3D SiP에 대한 관심이 높아지고 전기도금법을 이용한 구리 via filling이 활발히 연구되어왔다. Via filling시 via 입구와 바닥에 전류밀도 차이로 인해 via 내부에 결함이 발생하기 쉽다. 여러 가지 유기물 첨가제와 전류인가 방식의 변화를 통한 via filling을 하였다. 첨가된 유기물은 PEG, SPS, JGB, PEI를 사용하였다. 유기물이 첨가된 용액을 이용하여 펄스와 역펄스 방법을 이용하여 via filling을 하였다. 유기물의 첨가에 따른 도금된 구리 입자의 크기 및 형상에 관하여 고찰하였으며 도금 후 via 시편의 단면을 FESEM으로 관찰하였다. JGB에 비하여 PEI를 사용한 경우 치밀한 도금층을 얻을 수 있었다. 2 step via filling을 사용한 경우 via filling 시간을 단축시킬 수 있었다.

• 산업기술연구
• /
• 제35권
• /
• pp.3-8
• /
• 2015

A study has been made on defects which are formed in manufacturing processes of engine bearing and also on fatigue crack growth behavior in each step of bearing metal manufacturing. After the first step(sinter brass powder on steel plate ; Series A) many voids are made on brass surface and its size is decreased by the second step(rolling process of sintered plate ; Series B). After the third step(re-sintering step of brass powder and rolling ; Series C) the number of voids is decreased and its type shows line. The time of fatigue crack initiation and the growth rate of fatigue crack are in order of Series A, Series B, Series C. These reasons are that void fosters the crack initiation and growth, and residual stress made by rolling process effects on the crack growth rate in Series B, C. In forming and machining processes by use of final bearing metal, crack was observed at internal corner of flange and peeling off was observed at junction between steel and brass. Owing to the above crack and peeling off, it is considered that there is a possibility of fatigue fracture during the application time.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.181-187
• /
• 2008

본 논문은 유색아스팔트 혼합물에 사용된 안료가 유색아스팔트 혼합물 성능에 미치는 영향에 대한 시험 및 분석결과이다. 안료 입자 크기는 필러의 입자에 비하여 매우 미세하기 때문에 배합설계시 필러 량의 조절이 필요하다. 현행의 배합설계를 조사한 결과 필러의 투입량에 관계없이 배합설계시 골재중량의 약 2%를 투입하고 있는 것으로 조사되었다. 안료의 투입은 필러의 양을 증가시키는 것으로 아스팔트 혼합물의 공극관련 인자(공극률 및 VMA)에 영향을 주어 매우 불안정한 혼합물을 구성하게 된다. 이러한 영향은 포장의 공용성과 파손에 밀접한 관련이 있으며 역학 성능(간접인장강도, 회복탄성계수, 수분 민감도 및 크리프) 저하를 초래하는 것으로 시험결과 발견되었다.