• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.46-51
• /
• 2001

To reach high areal density, less track pitch is expected and more servo bandwidth is required. One approach to overcoming the problem is by using dual stage servo system. In this system, a voice coil motor (VCM) is used as the primary stage while a milliactuator is used as the secondary stage. We have suggested new milliactuator based on the shear mode of piezoelectric elements to drive the head suspension assembly. In this paper, we introduce controller design method, PQ method. PQ method reduces the controller design problem for DISO(dual-input/single-output) systems to two standard controller design problems for SISO(single-input/single-output) problems. The first part of PQ method directly address the issue of actuator output contribution, and the second part allows the use of traditional loop shaping to achieve the overall system performance. This paper shows how to employ the PQ method to meet aggressive close-loop performance specifications for a disk drive system with a VCM and piezoelectric milliactuator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.424-429
• /
• 2003

This paper proposes a swing-arm type dual-stage actuator, which consists of a PZT actuator for fine motion and a VCM(Voice Coil Motor) for coarse motion, for SFF ODD(Small Form Factor Optical Disk Drive), in order to achieve fast access speed and precise track following control. We focus our attention on the design and control of the PZT actuator, because there have been a lot of previous researches related to the VCM and dual-stage actuators. Due to the dual cantilever structure, the PZT actuator can generate precise translational tracking motion at its tip where optical pickup is attached at, and the effect of hysteric behavior of the PZT element is reduced. The dynamic model of the PZT actuator is derived by using the Hamilton's principle, and verified by comparing with the experimental frequency response. The sliding mode control is designed in order to be robust against modeling uncertainties. Simulations and experimental results confirm the effectiveness of the suggested control scheme.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.43-50
• /
• 2006

Recently, with rapid development of semiconductor and flat panel display, the manufacturing equipments are required to have large travel range, high productivity, and high accuracy. In this paper, an ultra precision decoupled dual servo (DDS) system is proposed to meet these requirements. And a control scheme for the DDS is studied. The proposed DDS consists of a $XY{\Theta}$ fine stage for handling work-pieces precisely and a XY coarse stage for large travel range. The fine stage consists of four voice coil motors (VCM) and air bearing guides. The coarse stage consists of linear motors and air bearing guides. The DDS is mechanically decoupled between coarse stage and fine stage. Therefore, both stages must be controlled independently and the performance of the DDS is mainly determined by the fine stage. For high performance tracking, the controller of fine stage consists of time delay control (TDC) and perturbation observer while the controller of coarse stage is TDC alone. With these individual controllers, two kinds of dual-servo control strategies are suggested: master-slave type and parallel type. By simulations and experiments, the performances of two dual-servo control strategies are compared.

• Journal of Mechanical Science and Technology
• /
• 제20권9호
• /
• pp.1371-1381
• /
• 2006

This paper deals with the active vibration control of a simply-supported beam traversed by a moving mass using fuzzy control. Governing equations for dynamic responses of a beam under a moving mass are derived by Galerkin's mode summation method, and the effect of forces (gravity force, Coliolis force, inertia force caused by the slope of the beam, transverse inertia force of the beam) due to the moving mass on the dynamic response of a beam is discussed. For the active control of dynamic deflection and vibration of a beam under the moving mass, the controller based on fuzzy logic is used and the experiments are conducted by VCM (voice coil motor) actuator to suppress the vibration of a beam. Through the numerical and experimental studies, the following conclusions were obtained. With increasing mass ratio y at a fixed velocity of the moving mass under the critical velocity, the position of moving mass at the maximum dynamic deflection moves to the right end of the beam. With increasing velocity of the moving mass at a fixed mass ratio ${\gamma}$, the position of moving mass at the maximum dynamic deflection moves to the right end of the beam too. The numerical predictions of dynamic deflection of the beam have a good agreement with the experimental results. With the fuzzy control, more than 50% reductions of dynamic deflection and residual vibration of the tested beam under the moving mass are obtained.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1616-1627
• /
• 2003

This paper describes a mini linear optical pickup actuator. To reduce the size, inner yokes are designed to guide the mover and outer yokes of permanent magnets are removed. Magnetic circuit method is used to determine the thrust force. Virtual path method is proposed to analyze the open magnetic circuit analysis. The magnetic circuit of the proposed actuator can be a closed circuit due to the virtual path model of the outer magnetic flux. The validity of virtual path method is evaluated by comparing to the FEM analysis. Structural vibration is investigated using FEM and the design of the mover is modified to improve the vibration characteristic. Dynamic characteristic experiments shows that the performance of the proposed actuator is enough to be used as a coarse and fine seeking actuator simultaneously and the thrust force margin for loading a focusing actuator is guaranteed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.3078-3080
• /
• 2005

본 논문에서는 AF 기능을 구현함에 있어서 2 백만 화소 카메라 모듈인 Sharp LZ0P3731의 기능, AF 모터 (VCM, Voice Coil Motor)에 작용하는 힘과 구동원리, 이를 구동하기 위한 H/W의 설계 특성, 및 DM270을 이용한 AF 제어 시 Focus Value의 특성 분석을 바탕으로 Focus Value 특성을 고려한 최적 AF 알고리즘을 개발하였다. 본 논문에서 제안한 최적 AF 알고리즘은 '최대의 Focus Value가 각 State의 Step Value 마다 각각 다른 위치에서 검출'되는 AF 모터 및 구동 H/W특성을 고려하여, 최적 AF 기능은 최대의 AF Value에 근접하는 Lens Position 제어가 가능하도록 하였다. 이를 검증하기 위한 윈도우용 S/W로 성능을 확인한 결과, 일반적인 AF 기능은 58 프레임으로 3.87초의 시간이 소요되는 반면, 제안한 AF 기능은 25 프레임으로 1.67초로 2배 이상의 빠른 AF 성능을 가졌다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6925-6931
• /
• 2015

LED(Light Emitting Diode)는 저 전력, 긴 수명, 고 휘도, 빠른 응답, 친환경적 특성으로 인해 조명, 디스플레이 등 여러 분야에 사용되고 있다. 백색광 발광다이오드 구현 방식에는 대표적으로 청색 LED 칩과 황색 형광체를 조합하여 백색광을 방출하는 유형이 사용 편리성, 경제성, 효율성 측면에서 LED 백라이트 유닛 및 LED 조명 제조에 가장 적합한 것으로 연구되어 실제 적용되고 있다. 백색광 구현 LED 칩 패키징 공정에서 청색 LED 칩에 황색 형광체에 실리콘을 혼합한 형광봉 지재를 토출하는 공정은 중요한 공정이다. 따라서 본 연구에서는 조명용 백색 LED 제조 공정에서 실리콘 봉지재를 토출하기 위하여 정전기력 방식과 보이스코일 모터를 이용하여 EHD 펌프 시스템을 개발하였다. 이를 위하여 인가전압 및 시간에 따른 유체곡면 형상을 확인하기 위하여 기초 토출 실험을 통해 최적의 토출 조건이 결정하였고 또한 검증을 위하여 실험계획법을 사용하였다. 검증된 토출 조건의 균일도를 확인하기 위하여 반복 토출 실험을 수행하였다.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.174-181
• /
• 2001

Nowadays, the improvement and development of Multi-media and information & communication technology is rapidly processed. They need large data storage capacity. So that, many studies and researches in data storage have been carried out. According to them, the data storage capacity has been increased. But the limitation of storage capacity is happened for several problems. One of them is spot & pit size in optical and magnetic data storage and another is the resolution of actuators. The problems in spot & pit size are covered by new data storage methods-- for examples, AFM(Atomic Force Microscopy), MO(Magneto-optical) system, and NFR(Near-Field decoding) system etc. But the resolution limit of an actuator was not developed and doesn\`t follow up the development of spot & pit size. Because of them, we should improve a resolution of an actuator. Especially, in this paper an actuator if studied and designed for NFR (in using SIL(Solid Immersion Lens) system. It is a dual stage actuator, which consists of a Fine actuator and a Coarse actuator. and should desire 100nm accuracy. Its actuating force generation method is VCM(Voice Coil Motor). The Fine actuator is composed of 4-leaf springs and a bobbin wrapped by coil. The Coarse actuator has Coils and 3-Roller bearings. Also, The Characteristics of designed actuator for NFR system is estimated by Sine-Swept mode and LDV(Laser Doppler Vibro-meter).

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1453-1459
• /
• 2012

본 연구에서는 보이스코일 모터와 압전 구동기를 동일 축으로 배치함으로써 초정밀 위치결정뿐만 아니라 동특성을 개선할 수 있도록 하는 듀얼 스테이지를 다룬다. 듀얼 스테이지는 모델링이 엉성할 경우 오히려 나쁜 동특성을 보이는 단점이 있다. 이 논문은 본드그래프를 이용하여 듀얼 스테이지를 모델링하고 동적 상태방정식을 본드그래프에서 유도하였다. 또한 동특성을 향상시키기 위한 보상기의 설계 예시를 보이고 있으며, 시뮬레이션을 통해 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.406-411
• /
• 2003

One of the trends on information storage device is focused on the development of micro-optical devices with OFH (Optical Flying Head). Many different types of sliders for OFH and optical component systems have been introduced in the literature. However, the important issue on the mechanical system, which consists of suspension, swing arm and VCM (Voice Coil Motor) part has not been discussed up to date. In this research, we analyses the suspension, which is used for the small form factor MO drive. The analysis is in process two ways. One is probabilistic analysis, another is dynamic shock analysis. Probabilistic analysis is a technique you can use to assess the effect of uncertain input parameters and assumptions on your analysis model. Using a probabilistic analysis you can and out how much the results of a finite elements analysis are affected by uncertainties in the model. Dynamic shock analysis is used for the mobile applications. The mechanical robustness of the suspension simulating the shock responses of a disk-suspension is proposed in this paper.