• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2001.11a
• /
• pp.13-16
• /
• 2001

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.54-61
• /
• 2005

A simulator for virtual laser machining is developed to help understanding and predicting the effects of machining parameters on the final machined results. Main program is based on the model for polymer ablation with short pulse excimer lasers. Version f of the simulator is built using Visual Fortran to make the user work under visual environment such as Windows on PC, where the important machining parameters can be input via dialog box and the calculated results for machined shape, beam fluence, and temperature distribution can be plotted through the 2-D graphics windows. Version II of the simulator is built using HTML, CGI and JAVA languages, allowing the user to control the input parameters and to see the results plot through the internet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.210-215
• /
• 2002

In this study, the computer program called Multi_Cycle, which simulates the steady-state performance (coefficient of performance, capacity, power consumption and etc.) of multi- airconditioning systems using R410A, was developed. In order to validate the simulation program, a series of case studies were carried out. The Multi_Cycle consists of several subroutines for simulating indoor units. outdoor unit, compressor, and expansion devices. and for estimating the thermodynamic and transport properties of the refrigerants and moist air. It would appear to be advantageous to use the Multi_Cycle for a performance analysis when considering various kinds of refrigerants and the complex operating conditions of each unit making up the multi-airconditioner cycle. Moreover, the Multi_Cycle would seem to be useful tool in optimizing a multi-airconditioning system and establishing economical and efficient operating conditions in the multi-airconditioner cycle. In the present study, the Multi_Cycle was programmed with Digital Visual Fortran for the main simulation code and Visual Basic for- the graphic user interface.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.403-410
• /
• 1999

General1y, H-section is used for columns and beams in the middle and low steel building, But it has a strong and weak axis. Thus if H-section is used for columns, the structure needs reinforcement on the weak axis. Therefore recently, square holler section(S.H.S) is used for columns because it is able to coiler the vulnerability of H-section. Structural analysis is usually executed under the assumption that connections are either ideally pinned joint or fully rigid joint. Actually all connections are semi-rigid which possess a rotational stiffness. Therefore it can be designed economically as using the property of connections which has a rotational stiffness. This paper presents a prediction model curve which is fitted Kishi-Chen power Model about the behavior of connection between H-beam and S.H.S column. Non-linear analysis program was considered the non-linearity of semi-rigid connection and the geometrical non-linearity under the effect of axial force. It was programed by FORTRAN90 and Visual Basic.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.19-20
• /
• 2012

한국해양수산연수원은 새로 설치된 다기능선박조종시뮬레이터(Full-mission Shiphandling Simulator)에 적합한 평가시스템을 맞추기 위하여 STN Atlas용 Fortran로 개발된 평가시스템을 Visual C++로 새로이 개발하였다. 그리고 이 시스템에 각 항만의 실제 상황을 고려하여 평가 점을 추가하거나 삭제하고, 평가 기준도 수정하였다. 이에 대하여 소개하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.16-25
• /
• 2003

A parallel computing environment based on Windows operating system was constructed and a performance test was mode in comparison with Linux based systems. The Windows 2000 cluster was composed with servers and clients connected by Fast-ethernet, within which two sub-clusters may operates together or separately. Compaq Visual Fortran complier and two MPI libraries, MPICH.NT.1.2.2 and NT-MPICHNT.1.2 were installed as computing tools. Parallel computing performance tests were carried out using two-dimensional preconditioned Navier-Stokes code to examine the dependency on the number of processors, problem size and MPI libraries, those were compared with results from Linux clusters. Results shows that a cluster based on the user-friendly Windows operating system is also useful for the parallel computing and has good performance comparable to the previous Linux clusters.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.204-212
• /
• 2006

A numerical analysis was carried out for separation of carbon dioxide from carbon dioxide/nitrogen gas mixture by a polyethersulfone hollow fiber membrane which has shown a good stability against plasticization by carbon dioxide and an excellent separation efficiency fur carbon dioxide from its gas mixture. A computer program for carbon dioxide separation was developed using the Compaq Visual Fortran 6.6 software. Governing module equations were thought to be an initial-value problem and the nonlinear ordinary differential equations were simultaneously solved using the Runge-Kutta-Verner fifth-order method. From results of numerical analysis, the carbon dioxide partial pressure of the feed stream, the pressure ratio of the feed side to the permeate side and the feed gas residence time at the inside of a membrane were found to be very important factors to affect the permeation characteristics of carbon dioxide.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.431-437
• /
• 2003

In this paper, an approximate optimization program based on GUI(graphic user interface) environment is developed. This program is coded by using Fortran and Visual basic. Fortran is used to Progress approximate optimization process. Visual basic is used to make user environment for user to use conveniently. Inside of this program, it uses two independent programs. One is commercial program, ANSYS, and the other is optimization program, PLBA(Pshenichny-Lim-Belegundu Arora). The former is used to obtain approximate equation of stress and displacement of a structure. The latter is used to solve approximate optimization. This algorithm uses second-order information of a function and active set strategy. This program is connecting ANSYS and PLBA. And it progress the process repeatedly until it obtain optimum value. As a method of approximate optimization, sequential design domain(SDD) is introduced. SDD starts with a certain range which is offseted from midpoint of an initial design domain and then SDD of the next step is determined by optimal point of a prior step.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.365-371
• /
• 2016

A numerical analysis was performed for a separation of carbon dioxide and methane using 2-staged, membrane process where two polysulfone hollow fiber membrane modules were connected to provide both the methane concentration richer than 95% and the recovery higher than 90% using the recycled flows. The Compaq Visual Fortran 6.6 software was utilized for the numerical simulation. Both the methane concentration and the recovery % of methane could be successfully predicted as the function of the operating conditions. As the feed pressure, the methane concentration, and the flow rate increase, the methane concentration in a product is also found to increase and the recovery of methane is found to decrease.

• Membrane Journal
• /
• v.16 no.4
• /
• pp.252-258
• /
• 2006

A numerical analysis was performed for a separation process of carbon dioxide from a flue gas stream using polyethersulfone hollow fiber membranes. Countercurrent flow governing equations were regarded to be two point boundary-value problem and the nonlinear ordinary differential equation were simultaneously solved using the finite- difference method. A computer program was developed using the Compaq Visual Fortran 6.6 software. The carbon dioxide permeate driving force and the fred gas residence time at the inside of membrane were found to be very important factors affecting the permeation characteristics of carbon dioxide. The carbon dioxide concentration in the permeate and the flow rate of the permeate were found to be slightly larger by a few percent with a countercurrent flow analysis than those with a cocurrent flow analysis.