• 한국전기전자재료학회논문지
• /
• 제22권9호
• /
• pp.772-775
• /
• 2009

Indium tin oxide(ITO) thin film was deposited at room temperature on polycarbonate(PC) substrate by in-line sputter system. ITO sputtering process was carried out at a various pressure for the reduction of ion damage on PC substrate and the electrical and the optical properties of deposited ITO films were obtained and analyzed. From the experimental results, the sheet resistances of as-deposited ITO films varied with a different pressure and the optical transmittances at visible wavelength were maintained above 85%. The results are considered to be related to the pressure of oxygen atoms as a reaction gas.

• 한국ITS학회 논문지
• /
• 제9권4호
• /
• pp.43-51
• /
• 2010

본 논문에서는, 실내 환경 LED-ID 통신 시스템에서의 고속 데이터 전송을 위한 라인코딩 기법에 대해 연구하였다. LED-ID 기술은 LED를 통해 방사되는 가시광을 이용한 차세대 통신 시스템으로, 유비쿼터스 네트워크 서비스 구축 시 에너지 절감 효과를 가져올 수 있다. 또한 LED-ID 통신 시스템은 기존 인프라를 활용하여 고출력 전송이 가능하며 유지 보수 비용을 절감할 수 있다. 그러므로, 기존 RF 시스템에 비해 실내 무선 통신 구축에 있어서 다양한 장점을 가진다. 이러한 장점을 바탕으로, 본 논문에서는 실내 환경의 LED-ID 통신 채널을 분석하고, 분석된 채널에 적합한 라인 코딩 (NRZ, AMI, 4B5B, HDB3, 8B10B)을 도출하여 고속 데이터 전송을 실현하고자 한다.

• 수산해양기술연구
• /
• 제33권4호
• /
• pp.352-359
• /
• 1997

쥐치 Stphanolepis cirrhifer의 선시력을 구하기 위하여, 표적물거리 100cm, 광환경 5가지(400,20,3,1,lx)및 표적물의 굵기(8.0~0.2mm)12가지 조건하에서 행동학적 수법으로 조사한 결과는 다음과 같다. 1. 쥐치의 학습교과는 실험회수가 210회이상에서 시인율이 80%이상이였고, 도달시간이 4~5초로 안정되었따. 2. 시인율은 표적물의 굵기가 굵고 겉보기 콘트라스트가 클 때 높았으나, 1lx이하에서는 대체로 낮았다. 3. 시인한계선의굴기는 밝기가 감소함에 따라 굵었는데, 400lx의 경우가 0.24m로 가장 가늘고, 다음으로 20lx인 경우 0.30mm, 5lx인 경우 0.40mm, 3lxmm, 5lx인 경우가 2.87mm로 가장 굵었다. 4. 시인한계선의 굵기에 대한 겉보기 콘트라스트는 밝기가 감소함에 따라 증가하였는데, 400lx와 20lx인 경우 0.01로 가장 작았으며, 5lx와 3lx인 경우는 각각 0.02와 0.03이였으며, 1lx의 경우가 0.09로 가장 컸다. 5. 쥐치의 선시력은 400lx의 경우가 1.21로 가장 좋았고, 다음으로 20lx인 경우 0.97, 5lx인 경우 0.73, 3lx인 경우 0.63으로 밝기가 감소함에 따라 감소하였고, 특히 1lx의 경우가 0.10로 현저距하게 감소하였다. 6. 표적물의 굵기 1mm와 6mm에 대한 시인거리는 밝기 400lx하에서 각각 약 4.2m와 25.0m였으나, 1lx인 경우는 400lx의 1/14과 1/12로 감소하였다.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.30-33
• /
• 2015

In injection molding, many kinds of defects have occurred because of a characteristic of plastics injection molding. Weld line is one of the defects is formed when separated melt fronts recombine together during the mold filling stage. That is one of problems in injection molding. Weld lines in the appearance of plastics parts can deteriorate visible quality. And most importantly, the local mechanical strength in the weld line area can be significantly weaker. It could be one of the most problems for structural applications. In this study, the mold available two-shot-molding of same polymers have been designed, and a series of experiment about tensile strength in weld line area has been conducted using Taguchi's design of experiment to optimize injection molding conditions decreasing of weld strength and find out a factors affected weld strength in two-shot- molding.

• Journal of Korean Neurosurgical Society
• /
• 제58권6호
• /
• pp.513-517
• /
• 2015

Objective : Microscopic indocyanine green (ICG) angiography is useful for identifying the completeness of aneurysm clipping and the preservation of parent arteries and small perforators. Neuroendoscopy is helpful for visualizing structures beyond the straight line of the microscopic view. We evaluated our prototype of endoscopic ICG fluorescence angiography in swine, which we developed in order to combine the merits of microscopic ICG angiography and endoscopy. Methods : Our endoscopic ICG system consists of a camera, a light source, a display and software. This system can simultaneously display real-time visible and near infrared fluorescence imaging on the same monitor. A commercially available endoscope was used, which was 4 mm in diameter and had an angle of $30^{\circ}$. A male crossbred swine was used. Results : Under general anesthesia, a small craniotomy was performed and the brain surface of the swine was exposed. ICG was injected via the ear vein with a bolus dose of 0.3 mg/kg. Visible and ICG fluorescence images of cortical vessels were simultaneously observed on the display monitor at high resolution. The real-time merging of the visible and fluorescent images corresponded well. Conclusion : Simultaneous visible color and ICG fluorescent imaging of the cortical vessels in the swine brain was satisfactory. Technical improvement and clinical implication are expected.

• 한국정보통신학회논문지
• /
• 제14권2호
• /
• pp.369-374
• /
• 2010

다각형 내부에 위치한 두 점 사이의 최단 경로는 다각형의 외부를 지나지 않는 경로 중에서 길이가 가장 짧은 경로를 말한다. 일반적인 단순 다각형에서 최단 경로를 구하는 선형 시간 알고리즘은 매우 복잡한 과정으로 알려진 삼각분할을 전처리과정으로 수행해야 한다. 따라서 이론적으로는 최적인 시간복잡도를 갖지만, 실제적으로는 구현이 어려울 뿐만 아니라 입력의 크기가 매우 크지 않은 한 수행 시간이 효율적이지 못하다. 본 논문에서는 다각형 내부의 모든 점들을 볼 수 있는 선분이 존재하는 다각형 부류인 선분가시 다각형의 내부에 위치한 두 점 사이의 최단 경로를 구하는 선형 시간 알고리즘을 제시한다. 이 알고리즘은 삼각 분할을 필요로 하지 않으며, 볼록 외피 구축 등 단순한 절차만으로 구성되어 있어 구현이 용이할 뿐만 아니라 수행 속도도 빠르다

• 천문학회지
• /
• 제36권spc1호
• /
• pp.55-61
• /
• 2003

There are at least three effects of the non-thermal particle bombardment on the solar atmosphere: (1) non-thermal ionization and excitation; (2) proton-hydrogen charge exchange; (3) impact line polarization. Due to the non-thermal ionization and excitation effects of electron bombardments in flares, H$\alpha$ line is widely broadened and shows a strong central reversal. Significant enhancements at the line wings of Ly$\alpha$ and Ly$\beta$ are also predicted. In the case of proton bombardment, less strong broadening and no large central reversal are expected. However, due to proton-hydrogen charge exchange, the enhancements at the red wings of Ly$\alpha$ and especially of Ly$\beta$ lines at the early impulsive phase of flares are significant. Electron beam can also in some cases generates visible and UV continuum emission in white-light flares. However, at the onset phase, a negative 'black' flare may appear in several seconds, due to the increase of the $H^-$ opacity. The impact polarization of atomic lines can provide complementary information on the energetic particles, the energy transport and deposit in the solar chromosphere. New results of spectropolarimetric analysis for the major flare on July 23, 2002 are also given in the paper.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.310-315
• /
• 2010

Theoretical and experimental investigations of moires in 3D displays were performed. To describe and minimize moires, we propose the polar representation form of moire waves. The experimental and theoretical data are in good agreement except in the neighborhood of the minimization angle. The implicit formulas are found for visible moires of line gratings at finite distances. The computer simulation and the physical experiments confirm the moire appearance for this case.

• 한국초지조사료학회지
• /
• 제14권1호
• /
• pp.57-63
• /
• 1994

We use a variety of methods to determine the optimum time for havesting corn for silage. In addition, adequate dry matter for silage must be considered along with maturity stage. The objective of this study was to evaluate using the kernel milk line to determine when to harvest com for silage in 1992 on the Livestock Experimental F m , Keiymung Junior College at Keongsan, Keongsangbukdo. Four hybrids were field grown and com plants were harvested at various stages of kernel development so that kemel milk line movement could be analyzed whilc the corn was in the premature stages. As the plants approached maturity, the ears were collected from each of the hybrids and the position of the milk line wa5 noted. Then the whole plants were chopped and the content of DM was determined. The milk line was a readily identifiable feature of maturing com kemels. We focused on the five development \tage\. The fint was "soft dough". The second was "dent". The third wa, "75% milk". and the fourth wa5 "half milk". The half milk occurs when the milk line is positioned falf way down the kemel face. and the final stages win "no milk", milk disappearance as indicators of physiological maturity in maix. Milk free stage of the kemel occurred from I to 3 days prior to black layer having developed. The range for harvesting com for silage occurs a kemels mature from 75% milk to no milk. Position of milk line was easy to see. and can be used as a visible indicator to determine com matunty stage\ and whole plant dry matter. Whole plant dry matter increased with advancing maturity. averaged over hybrids it was 24.1, 25.6. 28.5. 34.6 and 39.0% at soft dough, dent, 75% milk. half milk and no milk. Milk line was more usehl indicator in monitoring corn maturity prior to physiological maturity.ing corn maturity prior to physiological maturity.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.420-427
• /
• 2017

This paper proposes a new method using Wide Line Detector based statistical shape Feature (WLDF) to identify whether or not a tongue is cracked; a cracked tongue is one of the most frequently used visible features for diagnosis in traditional Chinese Medicine (TCM). We first detected a wide line in the tongue image, and then extracted WLDF, such as the maximum length of each detected region, and the ratio between maximum length and the area of the detected region. We trained a binary support vector machine (SVM) based on the WLDF to build a classifier for cracked tongues. We conducted an experiment based on our proposed scheme, using 196 samples of cracked tongues and 245 samples of non-cracked tongues. The results of the experiment indicate that the recognition accuracy of the proposed method is greater than 95%. In addition, we provide an analysis of the results of this experiment with different parameters, demonstrating the feasibility and effectiveness of the proposed scheme.