• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.6 no.1
• /
• pp.1-15
• /
• 2008

This study was designed to investigate the effect of treadmill exercise of low-intensity and high-intensity on the functional recovery and histological change in spinal cord injury rats. Sprague-Dawley rats were experimented(n=15) for this research. Spinal cord injury was induced by the NYU drop impacter device after laminectomy. After operation, rats were test at modified Tarlov scale at 3 days, and divided into the control group(n=5), experimental group I(n=5, low-intensity treadmill) and experimental group II(n=5, high-intensity treadmill). The rats were disciplined from 7 day through 21 day. Functional recovery was evaluated by the BBB scales and the Grid Walk test for the progressive locomotor recovery at 3, 7, 14, 21 days. Histopathological studies for the muscle in order to observation the change of damage and size of the organized surface which is visible visually it executed hematoxylin & eosin stain. According to the result of 4 weeks of treadmill exercise, group II showed improvement than group I of motor behavior after spinal cord injury.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.6
• /
• pp.1-11
• /
• 2013

The investigation on wind farm design using CFD technique was carried out to reduce turbulence intensity in a wind farm. A potential wind farm in Gasiri of Jeju Island was selected for the design and the commercial S/W of Meteodyn WT was used for applying CFD technique. The initial layout of wind turbines was derived using WindPRO which is mainly used for wind farm design in Korea. Then, the distribution of turbulence intensity on complex terrain was calculated and visible by Meteodyn WT. Based on the distribution, wind turbines were positioned properly. As a result, wind turbines could be deployed at positions with minimum turbulence intensity as well as maximum Annual Energy Production, AEP, using Meteodyn WT. It is necessary to take into account turbulence intensity in wind farm design to avoid wind turbine failure.

• Journal of Yeungnam Medical Science
• /
• v.7 no.2
• /
• pp.27-37
• /
• 1990

To investigate the changing patterns of microfilament and microtubule arrangement and influence of myocardial cells and colchicine to microfilament and microtubule formation in cardiac endothelial cells the authors carried out indirect immunofluorescence stain for actin and tubulin with supernatant monoclonal antibodies. Secondary antibodies were IgG FITC conjugate. The results were summerized as follows. Fiberform reactions were stronger in the cells with many processes and spread cytoplasm and they became weaker after the endothelial cells formed monolayer. In the endothelial cells cocultured with myocardial cells the fiberform of the microtubule became less visible compared to control group but fiberform of the microtubule maintained strong intensity as endothelial cells formed monolayer. In the group treated with colchicine, there were no visible differences in microfilaments compared to control group but fiberform of microtubule revealed weaker intensity after colchicine treatment. The intensity of microtubule fiberform returned to control level after 2 days.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.420-425
• /
• 2010

We produced a basic system of sterilization of nutrient solution based on the characteristics of coated filter with the visible light-reactive titanium oxide photocatalyst according to the findings of the first stage. We developed a model system with a proper number and arrangement of filter elements, the visible light-reactive titanium oxide photocatalyst according to findings from the basic performance test. Main results of this study were as followers; The ceramic filters showed the best performance of sterilization of nutrient solution. The visible light-reactive titanium oxide photocatalyst sterilized more effectively the nutrient solution under the sunlight than UV light. The sterilization performance by passing repeatedly through a few filter was more efficient than that by treating simultaneously with a large number of filters. The filter with 15ppi in pore size, 20 mm in thickness, and 3 layers in titanium oxide coating was desirable in the intensity and sterilization performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.3
• /
• pp.340-348
• /
• 2013

In Projection Stereolithography Apparatus (PSLA), Digital Micromirror Device (DMD) and Liquid Crystal Display (LCD) are used as a beam pattern generator. The DMD shows high resolution, but it is mostly applied in micro stereolithography due to high cost and fabricable area. In LCD, the size of pattern beam is freely controlled due to various panel sizes. The LCD, however, has some limitations such as short life time by the high power light source, non-uniform light intensity of pattern beam and low transmittance of UV-light. To solve these problems in LCD-based PSLA, a Scanbeam-SLA with LCD of 19 inches and visible LED-array is developed. In this system, the light module works like a scanner for uniform illumination. The system configuration, working principle and fabrication examples are addressed in this study.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1276-1291
• /
• 2014

In the field of visible light communication (VLC), light-emitting diodes (LEDs) are used for transmitting data via visible light. In this study, we analyze pulse dual slope modulation (PDSM) as a means of delivering information in VLC. PDSM involves the modulation of symmetrical slope pulses to encode binary 0s and 1s, and owing to the moderately increasing and decreasing pulse shapes that are created, this method enables more spectral efficiency than the variable pulse position modulation (VPPM) technique currently adopted in IEEE 802.15.7. In particular, PDSM allows for the avoidance of intra-frame flicker by providing idle pulses in a spectrum-efficient way. A simple detection scheme is proposed for PDSMsignals, and its bit error rate (BER) is analyzed mathematically at varying slopes to validate the process through simulation. The BER performance of PDSM detection using dual sampling is compared to the performances of PDSM and VPPM using correlation detection. It is found that, when the probability of idle pulse transmission is less than 0.08 and higher than 0, the BER of dual sampling PDSM is lower than that of PDSM using correlation detection over the entire light intensity range.

• Laser Solutions
• /
• v.12 no.1
• /
• pp.7-13
• /
• 2009

Engineering ceramics as sapphire are widely used in industry owing to their superior mechanical and corrosion properties. However, micromachining of sapphire is a considerable challenge due to its transparency. Recently, direct ablation of sapphire has been demonstrated with a visible laser pulse at sufficiently high laser intensity. In this work, the theoretical model for pulsed laser ablation of sapphire is suggested and numerical analysis is carried out using the model. Sapphire ablation begins with plasma generation by the laser interaction with surface defects, impurities and contaminations in the initial stage of machining. Subsequent absorption of the visible laser beam can be explained by three mechanisms: metalization of sapphire surface due to the EUV radiation from the hot plasma, increments of surface roughness and temperature-dependent absorption coefficient. Comparison of the computation results with experimental observation indicates that the proposed model of sapphire is reasonable.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.249-250
• /
• 2008

We report on the visible photoluminescence of the Tb/Yb co-doped alumino-germano-silicate fibers for visible fiber laser application. By changing the concentration ratios of $Tb^{3+}$ to $Yb^{3+}$, we optimized the solution doping conditions and obtained the highest emission efficiency at 546nm. The luminescence intensity at 546nm was found to increase with the relative increase of $Tb^{3+}$ ions.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2015

In this study, we consider visible light communication in an indoor line-of-sight environment. It has been proved that among the multiple input multiple output (MIMO) techniques, spatial modulation (SM) performs better than repetition coding (RC) and spatial multiplexing (SMP). On the basis of a combination of SM and pulse amplitude modulation (PAM), here, we propose an enhanced SM algorithm to improve the bit error rate. Traditional SM activates only one light-emitting diode (LED) at one time, and the proposed enhanced SM activates two LEDs at one time and reduces the intensity levels of PAM by half. Under the condition of a highly correlated channel, power imbalance is used to improve the algorithm performance. The comparison between the two schemes is implemented at the same signal-to-noise ratio. The simulation results illustrate that the enhanced SM outperforms the traditional SM in both highly correlated and lowly correlated channels. Furthermore, the proposed enhanced SM scheme can increase the transmission rate in most cases.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.965-970
• /
• 2012

Structure and optical properties of cadmium sulphide-zinc oxide composite nanorods have been evaluated by suitable characterization techniques. The X-ray diffraction spectrum contains a series of peaks corresponding to reflections from various sets of lattice planes of hexagonal ZnO as well as CdS. The above observation is supported by the Micro-Raman spectroscopy result. The optical reflectance spectra of CdS-ZnO is compared with that of ZnO where we observe an enhanced absorption and hence diminished reflection from CdS-ZnO compared to that from only ZnO. A very small intensity of the visible photoluminescence peak observed at 550 nm proves that the ZnO nanorods have very low concentrations of point defects such as oxygen vacancies and zinc interstitials. The photocurrent in the visible region has been significantly enhanced due to deposition of CdS on the surface of the ZnO nanorods. CdS acts as a visible sensitizer because of its lower band gap compared to ZnO.